Circulating Purification Glovebox BoldyTree
BoldyTree Circulating Purification Glovebox Material Device. OLED, OPV, Material, Semiconductor
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Material Dimensions | stainless steel, D400×L600 |
| Material Dimensions | stainless steel, D150×L200 |
| Dimensions | H1900×L1800×W800 |
| Dimensions | H1900×L1800×W1200 |
| Dimensions | H1900×L2400×W800 |
| Equipment Material | stainless steel；内表面镜面/拉丝外表面喷塑 |
| Analyzer | 0~1000ppm; 2% |
| Analyzer | 0~1000ppm; 2% |
| Control method | Manual |
| Doors and pallets | Double hatch, rotating type, with pneumatic arm assist; stainless steel guide rail tray |
| Doors and pallets | Single hatch, snap-on type; stainless steel guide rail tray |
| Vacuum pressure difference | <-0.1 Mpa |
| Workstation description | Single side single station |
| Workstation description | Double-sided single station |
| Workstation description | Single sided double station |
| Workstation description | Double sided double station |
| front panel window | Special tempered glass; 8mm thick, tilting window |
| lighting | 100W; installed above the window, with protective cover |
| filter | HEPA, pore size less than 0.3μm; installed at the air inlet and outlet |
| Storage table | Made of stainless steel, double or triple layer; with five levels of height adjustment |
| Alternate interface | DN quick-release flange; USB, SMA and other universal interfaces |
| control interface | Touch screen; 7 inches, automatic control |
| Vacuum pump | High performance oil pump; 4L/S |
| Purification column | Made of stainless steel; purification capacity: water and oxygen <1ppm |
Datasheet
Supplier Information
Related Products
-
SLM-DD series
Display Technologies
Thermo-test
The SLM-D series of air springs has a viscosity barrier inside the embossed pad foot;
-
SLM-DD High-Damping Air Spring
Display Technologies
Thermo-test
Base Dimensions: 96; 138; 205; 255; 300; 360; 430 SLM 12B -D1/DD1: 75 Ni: ±6
Structures;
-
Handheld single channel to tune light source
Display Technologies
Ovlink
Number of channels: 1; 2 Power Settings Range: C-band: 9~15.5 dBm Output power precision: ±1dB
Hand-held truncable source TSP series sub-channels (TSP-100) and dual channel (TSP-200) products; a portable, compact, truncable source of light; the adoption of precision control systems; the assurance of its high and stable wavelength and power output; the possession of high-output photopower and high-side depressive ratio; narrow-line wide-light output; and its wide application in related areas. The other product is equipped with OLED screens and entity buttons; it is also available; it is user-friendly. Output power, frequency adjustable high power, frequency reconciliation accuracy high stability and high reliability C/ L wavelengths high resolution display of OLED; remote control of entity key/ software
-
Desktop QCL laser controller OQLD series
Display Technologies
Ovlink
Control parameters: LD output current; 10; 5000; MA; TEC output currents; -15; 15; A Mode: Pulse ranges; 0.1-1000; ms Internal Modem: Bandwidthing; 0.02; 100; kHz
The OQLD series is a controller for quantum cascade lasers; supports the quasi-continuous wave (QCW) working mode and internal simulations. Provides accurate and stable currents; controls through front-board buttons and the visualization of LCD monitors. Very suitable for medium high power semiconductor laser applications. Support internal simulation output, support high-power quantum cascade lasers (QCL). Support continuous (CW) or quasi-continuous (QCW) mode operations
-
SLM Precision Metal 3D Print Series equipment LSP140
Display Technologies
Hglaser
LSP140 is a high-value, metal 3D printing device designed specifically for scientific research, education and research and development; the introduction of powder delivery structures; the simplification of the process of powdering without adding; the alignment of compact design; and significant space savings. Equipment integration for permanent filtering cores; effective reduction of maintenance costs; support for 500 W high power lasers; ensure print accuracy and efficiency. Only 5 kg of single powdering is required; the demand for diversified printing is met; it is an ideal option for laboratories, universities and small research and development centres
Related Articles
As premium broadband light sources situated between traditional LEDs and laser diodes, MicroLight superluminescent‑diode (SLD) products combine broad spectral bandwidth, sufficient optical output power and low‑coherence performance.
As a professional ultraviolet‑laser solution provider, Precilasers has launched its 266 nm narrow‑linewidth industrial laser, delivering reliable single‑frequency output for high‑precision interference lithography, semiconductor inspection and precision metrology applications.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
Driven by the rapid upgrading of intelligent vehicles, optoelectronic sensing technologies represented by laser sensing and infrared thermal imaging have become core pillars for high-level autonomous driving and smart cockpit iteration. Leveraging automotive-grade optoelectronic R&D advantages, Pilot Technology Group launches the VITAL intelligent vehicle solution. By integrating high-power VCSEL laser chips and vehicle infrared night-vision thermal imagers, the system comprehensively enhances vehicle environmental perception and realizes safer, smarter and more comfortable driving experiences.
Loading...
Name
Phone
Organization
Use Case
Database Platform