Laser -Posen Series
Save to Favorites
Specifications
| Parameter | Value |
|---|---|
| Cooling Method | water cooling |
| Power | > 20 W |
| Pulse Width | < 150 ns |
| Power | < 0.5% rms |
| Polarization Ratio | > 100:1 |
| Pointing Stability | < ±25 μrad/℃ |
| Dimensions | 432216137mm^3 |
| Pump | 8 m～10m |
| Power | > 35 W |
| Beam Divergence | < 10mrad |
| Dimensions | 564185132mm^3 |
| Power | > 180 W |
| Pulse Width | < 300 ns |
| Beam Divergence | < 12mrad |
| Dimensions | 718304.8108.7mm^3 |
| Power | > 50 W |
| Power | > 30 W |
| Pulse Width | < 500 ns |
| Power | < 3% rms |
| Beam Divergence | Fiber-Output Divergence Angle < 75mrad |
| Dimensions | 749.2394138 mm³ |
| Power | > 90 W |
| Power | > 70 W |
| Pulse energy stability | < 1% rms |
| Spot mode | multimode |
| Spot roundness | > 95% |
| Moderate range | 5%~80%, no condensation |
| Water cooler temperature setting | 20 ℃ ± 0.1 ℃ |
| Power supply requirements | 220 V AC |
| heat load | < 500 W |
| Water Cooler_Electrical Requirements | 220～240 V/50Hz |
| Water cooler_refrigeration capacity | > 1600 W |
| Spot roundness | > 90% |
| Water cooler_refrigeration capacity | > 2000 W |
| Spot roundness | > 85% |
| Water cooler_refrigeration capacity | > 5000 W |
| Pulse energy stability | < 3% rms |
| Spot roundness | ≥ 90% |
| Water cooler temperature setting | 24 ℃ ± 0.1 ℃ |
| Output Power | typical:90 W@10 kHz |
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
10G DFB Distributed Feedback Laser
Laser Modules & Systems
Hchiptech
Working temperature: -40–85 °C Output Power: Min 6.9 mW，typical 9 mW（T=25°C，Ith+30mA）
-
A word
Laser Modules & Systems
Gan-semi
-
1550 nm PZT narrow-line wide laser
Laser Modules & Systems
Ovlink
Central wavelength: 1550.12nm Lorenz's wide: ≤300Hz (customable) Size: ≤1KHz (customable)
PZT FM ultra narrow-wire lasers are external cavity feedback using high Q quality factors; ultra low phase noise is achieved by self-injecting locking; and ultra narrow line wide laser output; encapsulation sizes are small; power consumption is lower; environmental disturbance resistance is better; it is widely applied to fibre-optic sensors; dry communications; compact laser radar; quantum technology, etc. Very narrow line width; very low to 1Hz resistant to environmental interference Very low long-term frequency drift Low phase intensity (RIN) noise Stabilization of single-frequency work Non-jumping Small size low power PZT band bandwidth up to 100 kHz wavelengths (1 μm, C-band; L-band)
-
1550 nm high power mono-frequency continuous fibre-optic laser
Laser Modules & Systems
Ovlink
Central wavelength: typ: 1550 2nm Width: typ: ≤ 300kHz
The laser uses the MOPA technology system; takes full advantage of the technological advantages of fibre-optic laser noise suppression and pre-magnification; obtains a high power output while maintaining the maximum beam mass, the high oscillation distillation ratio, the high optical noise ratio; and is the ideal light source for successive Doppler laser wind radars. Typical applications are on-board wind radars, short-range dry wind radars. Nationally manufactured equipment Human eye safety wavelength 1550 nm single frequency, single luminum, full fibre-optic structure 100kHz volume laser width wide working temperature range
-
905 nm 50 W FP Fabry–Pérot Laser
Laser Modules & Systems
Hchiptech
Peak Output Power: 50 W Emission Wavelength: 895–915 nm, typical 905 nm
Related Articles
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
Driven by the continuous pursuit of higher precision and efficiency in optical communication and optoelectronic device manufacturing, OLCR-1000 Low-Coherence Interferometer, independently developed by Wuhan Guanggu Interconnect Technology Co., Ltd., provides an innovative technical solution for distributed return loss testing of optical fibers and optoelectronic devices.
Fluoride crystal glass and K9 optical glass are two core optical substrates widely used in precision optical systems, laser equipment and photoelectric scientific research.
For pulsed laser and full-spectrum optical testing, photodiodes and thermopiles have inherent drawbacks. Photodiodes show weak response in infrared band, while thermopiles feature slow response and cannot capture nanosecond narrow pulses.
Loading...
Name
Phone
Organization
Use Case
Database Platform