Uncooled Thermal Camera Core
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Material | Vanadium oxide |
| Pixels | 384 x 288 |
| Wavelength Range | 8~14μm |
| Optional Lens | 9mm/13mm/19mm/25mm/35mm/50mm fixed focus lens, the driver board supports ≥25mm electric lens; 30mm~150mm, 25mm~225m (zoom lens can be customized) |
| Non-uniformity Correction | Shutter correction (automatic/timing/temperature difference/manual) |
| Frame Rate | 50Hz |
| ParameterRetention | support |
| ImageTreatment | Digital filtering, noise reduction, detail enhancement |
| Pseudo-colorMode | Red hot, iron red, blue hot, green |
| Brightness | 0~9 |
| Contrast | 0~9 |
| Polarity | black hot/white hot |
| Technical Specification - Defective Pixel | support |
| Startup Time | 10s |
| Gain | automatic/manual |
| Cursor | Show/hide/move |
| Electrical Interface | 20pin |
| Control | UART/RS232 |
| Analog Video Output | PAL/NTSC |
| Digital Video Output | LVCMOS/BT656 (8-bit)/RAW/YUV |
| Operating Voltage | DC: 3.6V ~ +5.0V |
| Reverse Polarity Protection | Yes |
| Over/Under-voltage Protection | Yes |
| Storage Temperature | -40℃ ~ +70℃ |
| Humidity | 5% ~ 95% |
| Dimensions | 28mm x 28mm x 37mm |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
HCTR core
Infrared Imaging
Fjroe
It's like space: 10µm Electricity: 18-32 V DC (Electron polar protection) Number: F5.5
Nationally produced high sensitivity MTT focal-level infrared detectors; modular design; compact structure; small size; light weight; high integration; high sensitivity, ease of integration, rich interfaces, high reliability and high expanse; combinations with various optical lenses and other photovoltaic products Medium
-
Medium-wave cooling heat imager HOT18-275
Infrared Imaging
Fjroe
It's like space: 15µm Electricity: 11-13V DC (electrical polar protection) Number: F5.5
HOT18-275 Refrigeration Thermal Imager component uses high-temperature infrared detectors; its working temperature is much higher than that of conventional refrigeration detectors; it has small, light quantitative, low power consumption, start-up speed features; high-quality infrared images are available in aggregates and other photovoltaic products
-
Superlight medium-wave cooler heat imager
Infrared Imaging
Fjroe
Detector type: MCT Refrigeration mode: Sterling's cooling Like a dollar size: 15μm×15μm
18-275 mm is a medium wave-refrigerant thermal imager designed to be quantitatively-softly designed; a medium-infrared sensor of 640 x 512 high sensitivity; a specially designed infrared optical system; and a special lightweight modification with a guaranteed 14-fold increase in the focal length of 275 mm. The size and weight are at the top of the industry-specific thermograph components. Capable of small size, light weight, long focal length, large mutation ratio, interface abundance, high accuracy alignment of light axis, clear image of the entire distance, etc.; easy to integrate into other integer or photovoltaic systems
-
Standard medium-wave cooling heat imager 20-275mm
Infrared Imaging
Fjroe
Detector type: MCT Refrigeration mode: Sterling's cooling Like a dollar size: 15μm×15μm
20-275 mm is a high-end medium-wave refrigeration thermal imager; a continuous condensed thermal imager with 640 x 512 high sensitivity medium-infrared detectors; specially designed infrared optical systems; guaranteed light quantification; miniaturization; low power consumption; up to a maximum of 275 mm focal length. Electrical and control interfaces are well designed; they allow integration into other whole units or PV systems Medium
-
Infrared pod
Infrared Imaging
Gem-oe
Extensive use in aerospace
Related Articles
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
Driven by the continuous pursuit of higher precision and efficiency in optical communication and optoelectronic device manufacturing, OLCR-1000 Low-Coherence Interferometer, independently developed by Wuhan Guanggu Interconnect Technology Co., Ltd., provides an innovative technical solution for distributed return loss testing of optical fibers and optoelectronic devices.
Fluoride crystal glass and K9 optical glass are two core optical substrates widely used in precision optical systems, laser equipment and photoelectric scientific research.
For pulsed laser and full-spectrum optical testing, photodiodes and thermopiles have inherent drawbacks. Photodiodes show weak response in infrared band, while thermopiles feature slow response and cannot capture nanosecond narrow pulses.
Loading...
Name
Phone
Organization
Use Case
Database Platform