LCM-100 Launch Condition Meter
The LCM-100 is a compact and convenient instrument designed for scanning optical fibers. It enables users to scan and easily plot far-field patterns using Santec's software. The device is equipped with two internal LEDs and features auto-alignment and focusing capabilities, making it ideal for fiber analysis and mode field diameter measurements.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Scanning Range | ±0.5NA to ±0.3rad |
| Scanning Resolution | 0.2° |
| Scanning Aperture | 0.32NA |
| Receiver Wavelength Range (nm) | 850 to 1700 / 450 to 1100 |
| Optical Power Resolution | 0.01dB or 0.01% |
| Scanning Speed (typical) | 30s / 10s |
| Connector Interface | Universal 2.5mm |
| Transmitter LED Wavelength (nm) | 850 / 1300 |
| Output Power (typical) (dBm) | -13 |
| Data Interface | USB |
| Power Supply | Input: 90-264VAC, 45-63Hz |
| Unit Dimension W×H×D (cm) | 42.5×17×25.4 |
| Operating Temperature (°C) | 0 to 35 |
Applications
Key Features
Datasheet
Supplier Information
Related Products
-
AQ7277B-B01 Remote OTDR
Fiber Test & Measurement
Yokogawa
Wavelength: 1650±5nm Pulse Optical Output: +15dBm or less Event Dead Zone: ≤6m (typ.) 0.7m
The AQ7277B-B01 is a high-performance remote OTDR module designed for RFTS (Remote Fiber Test System). It offers precise measurement capabilities at 1650 nm wavelength, built-in filters for live fiber monitoring, and supports PON system testing with high-port-count splitters.
-
AQ7277B-B01 Remote OTDR
Fiber Test & Measurement
Yokogawa
Wavelength: 1650±5nm Pulse Optical Output: +15dBm or less Event Dead Zone: ≤0.6m (typ.) 0.7m
The AQ7277B-B01 is a high-performance OTDR module designed for Remote Fiber Test System (RFTS), offering precise fiber monitoring and testing capabilities.
-
OT-04 Fiber Ranger
Fiber Test & Measurement
Kaitengtx
Model: OT-04 Operating Wavelength: 1550nm Fiber Type: 9/125um Single Mode Fiber
The OT-04 Fiber Ranger is a compact and efficient optical testing device designed for precise measurement and troubleshooting in fiber optic networks.
-
Fiber Bragg Grating Signal Analyzer
Fiber Test & Measurement
Hoyatek
: -30 ~120℃ : 1 : 0.1℃
-
Back-Reflection Meter
Fiber Test & Measurement
Hoyatek
: 30 or 70 : 2000 : Spatial resolution (between two points) 1
Related Articles
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
An infrared transmitter (IR transmitter) is a basic electronic component that sends invisible infrared light signals for short-range wireless control. It is widely used in daily electronics, smart home devices, and industrial equipment due to its low cost, low power consumption, and stable performance.
Shanghai Connet Laser Technology Co., Ltd. focuses on technological innovation, delivering cutting-edge photonic products & solutions for industrial lasers, LiDAR, fiber optic sensing, coherent telecom, cold atom physics and precision spectroscopy research & mass manufacturing.
Wuhan Optical Valley Interlink Technology Co., Ltd. was founded in 2013 by a technical team from Huazhong University of Science and Technology.
Loading...
Name
Phone
Organization
Use Case
Database Platform