GPON OLT Model
The HSGQ GPON OLT Model is a high-performance optical line terminal designed for Gigabit Ethernet Passive Optical Networks (GPON). It features advanced digital diagnostics, single power supply, and compatibility with SFP-8472 standards, ensuring reliable and efficient data transmission.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Package | SFP |
| Data Rate | 1.25Gbps/1.25Gbps |
| Wavelength | 1490nm/1310nm |
| Transmit Optical Power | +3~+7dBm |
| Interface | SC |
| Receiving Sensitivity | <-32dBm |
| Storage Temperature | -40~+85°C |
| Operating Temperature | 0~+70°C |
| Supply Voltage | 3.3V |
| Power Supply Voltage | 3.3V |
| Voltage at any Input Pin | -0.3~4V |
| Side Mode Suppression Ratio | >30dB |
| Output Power | -5~0dBm |
| Extinction Ratio | >10dB |
| Output power at transmit off | <-45dBm |
| Differential Input Voltage | 0.2~2.0V |
| TX Disable Input Voltage Low | 0~0.8V |
| TX Disable Input Voltage High | 2~Vcc+0.3V |
| TX Fault Output Voltage Low | 0~0.4V |
| TX Fault Output Voltage High | 2~Vcc+0.3V |
| Signal Detect Assert | -34~-32dBm |
| Signal Detect Deassert | -32~-30dBm |
| Signal Detect Offset | -0.5~0.5V |
| Signal Detect Voltage | 2~Vcc+0.3V |
| Signal Detect Current | 0~500μA |
| LOS De-assert Time | <100μs |
| LOS Assert Time | <100μs |
| LOS De-assert Voltage | 2~Vcc+0.3V |
| LOS Assert Voltage | 0~0.4V |
| RSSI Trigger | 20 |
| RSSI Ranging Time | 35 |
| RSSI Range | -12~0dBm |
| RSSI Detect Time | <100μs |
| RSSI Detect Voltage | 2~Vcc+0.3V |
| RSSI Detect Current | 0~500μA |
Applications
Key Features
Datasheet
Supplier Information
Related Products
-
4GE+1POTS+CATV Dual-Band WiFi XPON ONU
Optical Receiver Equipment
Cdatatec
PON Interface: 1×SC/APC, GPON/EPON auto-adaptive (XPON) Standards: ITU-T G.984.x (GPON); IEEE 802.3ah (EPON) Downstream Rate: 2.488Gbps (GPON); 1.25Gbps (EPON)
A white desktop FTTH optical network terminal from C-Data with four external high-gain antennas. The front-panel status LEDs (PWR, PON, LOS, INT, LAN1~LAN4, TEL, CATV, 2.4G and 5G/WiFi) indicate a GPON/EPON (XPON) ONU that integrates 4 Gigabit Ethernet ports, 1 POTS voice port, an RF CATV output and dual-band 2.4GHz/5GHz WiFi, delivering triple-play broadband, IPTV/CATV and VoIP services over a single fiber.
-
4GE+1POTS+CATV+WiFi GPON ONU (FTTH Optical Network Terminal)
Optical Receiver Equipment
Cdatatec
Number of External Antennas: 4 Ethernet LAN Ports: 4×RJ45 (10/100/1000Mbps, yellow) POTS Voice Port: 1×RJ11
Based on the product image, this device is a desktop FTTH optical network terminal (ONU/ONT) integrating broadband data, VoIP voice and CATV video services in a single unit. The rear panel is equipped with four yellow RJ45 Ethernet LAN ports, one RJ11 telephone (POTS) port, one F-type coaxial RF output for cable TV (CATV), one DC power jack and a reset button. Four external high-gain antennas provide dual-band wireless coverage, making the unit a typical triple-play gateway for fiber-to-the-home deployments. The white plastic enclosure with bottom ventilation slots supports desktop placement and long-term stable operation. Detailed optical and electrical parameters should be confirmed with the manufacturer's official datasheet.
-
FT1004B Remote GPON OLT
Optical Receiver Equipment
Cdatatec
Model: FT1004B Device Type: Remote GPON OLT Number of PON Ports: 4
The C-DATA FT1004B is a compact remote GPON Optical Line Terminal (OLT) in a 1U rack-mount chassis. It provides 4 GPON SFP ports compliant with ITU-T G.984.x standards, a 10GE uplink port for high-capacity backhaul, and a front-panel LCD status monitor with comprehensive LED indicators. Equipped with a console port and reset button, it supports flexible local and remote management, making it ideal for FTTH/FTTB fiber access and edge/remote node deployments.
-
Fiber Optic Terminal Box
Optical Receiver Equipment
Cdatatec
Product Type: Fiber Optic Terminal Box / Optical Cable Terminal Enclosure Housing Material: Cold-rolled steel (typical for this enclosure type) Surface Treatment: Electrostatic powder coating
The product shown is a fiber optic terminal box (optical cable terminal enclosure) with a rectangular cold-rolled steel housing and a removable top cover fixed by screws. The white electrostatic powder-coated enclosure is designed to protect fiber splicing, termination and distribution points, providing a clean and compact solution for managing incoming optical cables and pigtails in FTTH, LAN and telecom wiring environments. The flat-lid structure allows easy access for installation, fusion splicing and maintenance, while the sealed metal body protects internal fiber connections from dust and external damage. Ports/adapter openings and internal accessories are configured according to the specific model. Detailed parameters such as exact dimensions and port count should be confirmed with the supplier, as they are not shown in the provided material.
-
PON/POF Optical Terminal (FTTH Media Converter)
Optical Receiver Equipment
Cdatatec
Supported Optical Network Type: PON/POF Optical Interface Type: SC (Blue) Number of Optical Ports: 1
The PON/POF Optical Terminal is a compact fiber optic communication device designed to terminate PON (Passive Optical Network) lines and support POF (Plastic Optical Fiber) connectivity. Based on the product image, the front panel is equipped with a blue SC-type optical port labeled 'PON/POF' and a DC barrel jack labeled 'PWR' for power input. The top cover carries LED status indicators for power and link monitoring. The unit is housed in a sturdy white metal enclosure with four front-panel fixing screws and bottom mounting tabs, allowing easy wall or cabinet installation for FTTH and in-building optical distribution applications.
Related Articles
Founded in 2004, Wuhan Union Optic Inc. is a National Specialized, Refined, Unique & Innovative "Little Giant" high-tech enterprise located in Wuhan East Lake High-Tech Development Zone.
A solid-state laser is one of the most common and reliable laser types used in modern industry, medical equipment, and scientific research. Unlike gas or fiber lasers, it uses solid materials as its gain medium to generate stable, high-brightness laser beams. Thanks to its high precision, long lifespan, and compact structure, solid-state lasers have become a mainstream solution for high-precision laser processing and optical systems.
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
In photonics and laser technology, devices that manipulate optical signals via the electro-optic effect form the backbone of precision optical systems. Electro-optic phase modulators and electro-optic deflectors are two prominent examples of this device category. As a critical hardware solution for high-speed, high-accuracy laser beam direction control, electro-optic deflectors are widely deployed across industrial and research settings. Below is a detailed overview of their core structure, key performance drivers, and primary use cases.
Loading...
Name
Phone
Organization
Use Case
Database Platform