Enhanced SDH/POS Network Traffic Splitter / Network Traffic Replicator / Network TAP Switch RD-TAP-48P
Enhanced SDH/POS Tap Converts to Ethernet,Flexible Efficient Collection/Filtering/Aggregation/Distribution/Load Balance/Replication for Traffic Control,Backup,Security.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Service Interface (POS) | 24 Receivers for155M/622M/2.5G/10G POS and10G WAN;Each POS Rate Independently/Dynamically Switchable |
| Service Interface (ETH) | 24 10GE/1GE Transmit/Receive Channels |
| Throughput (*) [Functions Listed Are a Collection; Functions and Interface Specifications Customizable by Scenario, Including but Not Limited to Those Listed] | 480Gbps |
| Management Interface | 1*RJ45 Management Port, 1*RJ45 Serial Port |
| Packet Identification | PPP/HDLC to ETH Conversion;2-Layer VLAN,4-Layer MPLS Labels,VPLS,GRE/GTP and Other Tunnels(Select Inner/Outer Layer for Matching),IPv4,IPv6,ICMP,SCTP,etc. |
| Multi-Tuple Rules | Source/Destination MAC,Layer2 Protocol,Source/Destination IP,Protocol,Source/Destination Port,VLAN ID,Input Interface,etc. |
| Packet Output | Five-Tuple Filtering Classifies by Physical Port,Source/Destination MAC,L2 Protocol,Source/Destination IP/Port and Protocol;Matched Traffic Can Be Replicated,Directed to Ports/Groups,Dropped or Load-Balanced;Inner/Outer Five Tuples Selectable for Matching/Distribution;Packet Truncation |
| Signature Rules | Supports Signature Rules at Fixed Offsets from Payload Start, Signature Length up to 16 Bytes |
| Packet Replication | Supports 1:N Traffic Replication |
| Packet Aggregation | Multiport Traffic Aggregation Supported, N:1 and N:N Aggregation |
| Packet Diversion | Multiport Traffic Distribution, 1:N and N:N; Weighted Load-Balancing Distribution Configuration Supported |
| Bandwidth Control | Output-Port Weight Configuration and Traffic/Bandwidth Management for Bandwidth Control within Output Groups |
| Rule Capacity | 480 Lines |
| Output Interface Group | At Least 48 |
| Load Balancing | Output to Interface Groups Using SIP,SIP+SP,DIP,DIP+DP,SDIP,SDIP+SDP,ROUND ROBIN,Broadcast and Other Strategies;Detects Host LINK Status for Intelligent Load-Balanced Output |
| Header Stripping | Supports VLAN, MPLS and Tunnel Packet Header Stripping |
| Information Carried in Output Packets | Source and Destination MAC Addresses in the Output Packet's Link-Layer Header Can Be Modified to Identify Relevant Output Packet Information. Rules Can Assign MAC Tags, Input Ports, Matching Rule Numbers or Precise Timestamps to Packets |
| Same Source and Destination | Whole-Unit Packets with the Same Source and Destination (The Same Flow from Different Input Interfaces Can Also Be Output with the Same Source and Destination) |
| Configuration Management | Netview Visual Integrated Network Management with CLI,SNMP and WEB Management;User-Friendly Configuration Interface,All Configuration Available Through WEB;Remote Upgrades Preserve System Configuration |
| Chassis Dimensions | 1U 410×440×44(mm) (Depth×Width×Height) |
| Heat Dissipation Method | Chassis Fan Cooling |
| Weight | 9KG |
| Environmental Requirements | Operating Temperature: 0℃ to 50℃; Storage Temperature: -10℃ to 60℃; Humidity: 10%-90% (Non-Condensing) |
| Power Supply and Power Consumption | Supply: 220V AC or -48V DC, 1+1 Redundancy; Power Consumption: 160W |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Single-Channel 4K Ultra-HD H.265 Encoder Module E-UD-0111-00-01
Communications & Energy
Prevail-catv
Input Interface - Type 1 [One Primary and One Backup]: HDMI*2 Input Interface - Type 2: Digital Audio (SPDIF) Input Interface - Type 3: Analog Audio
-
IP Switch WS-IP
Communications & Energy
Prevail-catv
WS-IP Professional Broadcast IP Switcher,Years of Development/Improvement,Excellent Performance,Meets Relevant National Standards.
-
6-Electrical-Port POE Gigabit Industrial Switch FW304GPS-2G
Communications & Energy
Fiberwdm
Network Interface: 6 10/100/1000M RJ45 Ports Performance Specifications: MAC address table: 2k; backplane bandwidth: 12Gbps; packet forwarding rate: 8.9Mpps; forwarding mode: store-and-forward Power Supply Support: Maximum Output Power: 30W; Voltage Input: 48-56V DC; Input Method: Pluggable 5-Pin Terminal with 5.08mm Pitch
FW304GPS-2G is a quasi-industrial all-Gigabit managed PoE switch with six10/100/1000M adaptive RJ45 ports;the description also specifies two10/100/1000M RJ45 uplinks. All ports support6KV lightning protection,with supply overtemperature/overvoltage and surge-current protection. IEEE802.3x full-duplex and half-duplex backpressure flow control are supported. IEEE802.3af/at provides up to30W PoE per port. Reliable protection suits complex environments. Redundant48–56VDC dual inputs support dual-DC or the stated dual-DC/AC redundant supply arrangements.
-
Broadband PON Network Single-Line Dual-Access Equipment FW-P801
Communications & Energy
Fiberwdm
Insertion Loss [Paired Single-Line Dual-Access Equipment; PDF Page 2 Product Features]: <1.6 dB
Single-Fiber Residential Drop Supports Multiple Broadband Services per User/Tenants or Fast Network Migration before Expiry,Avoids Second Entry Cable/Uses Existing Drop for Fast Installation.
Related Articles
Founded in 2019, Jilin JC Ultrafast Equipment Co., Ltd. is a high-tech enterprise incubated by the Ultrafast Optoelectronics Center of Jilin University. Our R&D team owns 15 years of profound experience in femtosecond laser micro-nano fabrication.
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
Driven by the rapid upgrading of intelligent vehicles, optoelectronic sensing technologies represented by laser sensing and infrared thermal imaging have become core pillars for high-level autonomous driving and smart cockpit iteration. Leveraging automotive-grade optoelectronic R&D advantages, Pilot Technology Group launches the VITAL intelligent vehicle solution. By integrating high-power VCSEL laser chips and vehicle infrared night-vision thermal imagers, the system comprehensively enhances vehicle environmental perception and realizes safer, smarter and more comfortable driving experiences.
The MSL‑T series water‑cooled continuous‑wave single‑longitudinal‑mode lasers from Changchun New Industries Optoelectronics (CNI) deliver key research wavelengths including 369 nm, 405 nm and 770 nm.
Loading...
Name
Phone
Organization
Use Case
Database Platform