2x4 Mechanical Optical Switch
The 2x4 Mechanical Fiber Optical switch connects optical channels by directing or blocking an incoming optical signal into the output fiber. This is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal. A latching version preserves the selected optical path after the drive signal has been removed, while the non-latching versions default to either the open or closed state when power is removed. The switch has integrated electrical position sensors. The new material based advanced design significantly reduces moving part position sensitivity, offering unprecedented high stability as well as unmatched low cost
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Operating Wavelength | 1260~1620nm (SM) 850nm(MM) |
| Insertion Loss | ≤1.2dB |
| Wavelength Dependent Loss | ≤0.25dB |
| Polarization Dependent Loss | ≤0.05dB |
| Temperature Dependent Loss | ≤0.25dB |
| Return Loss | SM≥50dB MM≥30dB |
| Cross Talk | SM≥55dB MM≥35dB |
| Switch Time | ≤8ms |
| Repeatability | ≤±0.02dB |
| Durability | ≥107times |
| Operating Voltage | 3 or 5V |
| Switch Type | Non-Latching/Latching |
| Operating Temperature | －20~＋70℃ |
| Storage Temperature | －40~＋85℃ |
| Optical Power | ≤500mW |
| Dimension | 52.7L×37.2W×10.0H mm |
| Relay 4 [NO. 1; Optical Route A-1、B-2] | 1 |
| Relay 6 [NO. 1; Optical Route A-1、B-2] | 1 |
| Relay 1 [NO. 2; Optical Route A-1、B-3] | 1 |
| Relay 2 [NO. 2; Optical Route A-1、B-3] | 1 |
| Relay 4 [NO. 2; Optical Route A-1、B-3] | 1 |
| Relay 5 [NO. 2; Optical Route A-1、B-3] | 1 |
| Relay 6 [NO. 2; Optical Route A-1、B-3] | 1 |
| Relay 1 [NO. 3; Optical Route A-1、B-4] | 1 |
| Relay 2 [NO. 3; Optical Route A-1、B-4] | 1 |
| Relay 4 [NO. 3; Optical Route A-1、B-4] | 1 |
| Relay 5 [NO. 3; Optical Route A-1、B-4] | 1 |
| Relay 2 [NO. 4; Optical Route A-2、B-1] | 1 |
| Relay 4 [NO. 4; Optical Route A-2、B-1] | 1 |
| Relay 6 [NO. 4; Optical Route A-2、B-1] | 1 |
| Relay 1 [NO. 5; Optical Route A-2、B-3] | 1 |
| Relay 2 [NO. 5; Optical Route A-2、B-3] | 1 |
| Relay 3 [NO. 5; Optical Route A-2、B-3] | 1 |
| Relay 4 [NO. 5; Optical Route A-2、B-3] | 1 |
| Relay 5 [NO. 5; Optical Route A-2、B-3] | 1 |
| Relay 6 [NO. 5; Optical Route A-2、B-3] | 1 |
| Relay 1 [NO. 6; Optical Route A-2、B-4] | 1 |
| Relay 2 [NO. 6; Optical Route A-2、B-4] | 1 |
| Relay 3 [NO. 6; Optical Route A-2、B-4] | 1 |
| Relay 5 [NO. 6; Optical Route A-2、B-4] | 1 |
| Relay 6 [NO. 6; Optical Route A-2、B-4] | 1 |
| Relay 3 [NO. 7; Optical Route A-3、B-1] | 1 |
| Relay 4 [NO. 7; Optical Route A-3、B-1] | 1 |
| Relay 5 [NO. 7; Optical Route A-3、B-1] | 1 |
| Relay 6 [NO. 7; Optical Route A-3、B-1] | 1 |
| Relay 2 [NO. 8; Optical Route A-3、B-2] | 1 |
| Relay 3 [NO. 8; Optical Route A-3、B-2] | 1 |
| Relay 4 [NO. 8; Optical Route A-3、B-2] | 1 |
| Relay 5 [NO. 8; Optical Route A-3、B-2] | 1 |
| Relay 6 [NO. 8; Optical Route A-3、B-2] | 1 |
| Relay 1 [NO. 9; Optical Route A-3、B-4] | 1 |
| Relay 2 [NO. 9; Optical Route A-3、B-4] | 1 |
| Relay 3 [NO. 9; Optical Route A-3、B-4] | 1 |
| Relay 6 [NO. 9; Optical Route A-3、B-4] | 1 |
| Relay 3 [NO. 10; Optical Route A-4、B-1] | 1 |
| Relay 4 [NO. 10; Optical Route A-4、B-1] | 1 |
| Relay 5 [NO. 10; Optical Route A-4、B-1] | 1 |
| Relay 2 [NO. 11; Optical Route A-4、B-2] | 1 |
| Relay 3 [NO. 11; Optical Route A-4、B-2] | 1 |
| Relay 4 [NO. 11; Optical Route A-4、B-2] | 1 |
| Relay 5 [NO. 11; Optical Route A-4、B-2] | 1 |
| Relay 1 [NO. 12; Optical Route A-4、B-3] | 1 |
| Relay 2 [NO. 12; Optical Route A-4、B-3] | 1 |
| Relay 3 [NO. 12; Optical Route A-4、B-3] | 1 |
| -Wavelength- [Ordering Information] | 1060＝1 C＋L＝2 1310＝3 1410＝4 1550＝5 650＝6 780＝7 1260-1610=A 1310/1550＝9 850=8 Special＝0 |
| -Switch Type- [Ordering Information] | Latching＝1 Non-latching＝2 Special＝0 |
| -Voltage- [Ordering Information] | 3V=3 5V=5 Special＝0 |
| -Fiber Type- [Ordering Information] | SM28=1 50/125=5 62.5/125=6 Special＝0 |
| -Package- [Ordering Information] | Bare fiber=1 900um tube=3 Special＝0 |
| -Fiber length- [Ordering Information] | 0.25m=1 0.5m=2 1.0m=3 Special＝0 |
| -Connector- [Ordering Information] | None=1 FC/PC=2 FC/APC=3 SC/PC=4 SC/APC=5 ST/PC=6 LC/PC=7 Duplex LC=8 Special＝0 |
Applications
Key Features
Datasheet
Supplier Information
Related Products
-
1x16/1X32/1X64 Mechanical Optical Switch
Fiber Optic Switches
Fiberwdm
Operating Wavelength: 1260~1620 for SM, 850~1300 for MM Insertion Loss: ≤1.0（typical：0.8） Wavelength Dependent Loss: ≤0.25 dB
These 1x12/1x16/1X32/1X64 mechanical optical switches use stepper-motor drives. The 1xN multichannel design is widely used in OADM, OXC and system monitoring. Special optics provide fast switching, low insertion loss, excellent optical characteristics and high reliability. Compact construction and small volume enable dense integration into fiber communications systems.
-
1x8 300um Fiber 900~1700nm Mechanical Optical Switch Device OSW-1X8-300UM
Fiber Optic Switches
Fiberwdm
Insertion Loss: typical:1.0dB; max:1.2dB Operating Wavelength: 900～1700nm Return Loss: ≥30dB
OSW-1X8-300UM switches/converts/selects optical paths, connecting one input or output to one of multiple channels for output or input. In fiber-transmission systems, uses include multiple monitors, LANs, multiple light sources/detectors and protected Ethernet switching. Applications include multichannel optical monitoring, automatic LAN source/detector switching, multipoint dynamic fiber-sensing monitoring, fiber/device/network/field-cable testing and optical-device assembly/alignment.
-
Optical Line Protection (OLP) FW6600-OLP
Fiber Optic Switches
Fiberwdm
Wavelength Range: Tx1310±50nm and 1550±50nm Detected Optical Power Range [Tx]: +2dBm~-50dBm Detected Optical Power Range [Rx]: +10dBm~-50dBm
FIBERWDM瑞东科技's OLP protection board provides fiber-line backup using an advanced automatic path-switching module. It recognizes primary/standby optical-signal states and switches instantaneously, maintaining operation when the primary cable is completely blocked and improving service quality. It serves trunk primary/backup protection and varied switched optical networks. Small size, economy and safety, with optical signals directly converted/utilized within the optical line, suit many transmission applications.
-
RD-OLP Automatic Secondary Fiber Route Switching Protection Equipment, Supporting 1 Main/Backup Fiber Switching Channel
Fiber Optic Switches
Fiberwdm
Test Wavelength [OLP-1:1]: 1310/1550 Insertion Loss [OLP-1:1]: TX≤1.2 RX≤1.2 Return Loss [OLP-1:1]: ≥ 45 dB
RD-OLP Independent Physical-Fiber Monitoring/Protection,Automatically Switches Degraded/Blocked Working Path to Backup in Real Time for Reliable Safe Flexible/Disaster-Resistant Networks.
-
RD-OLP Automatic Secondary Fiber Route Switching Protection Equipment, Supporting 8 Main/Backup Fiber Switching Channels
Fiber Optic Switches
Fiberwdm
Operating Wavelength [OLP-1:1]: 1260-1650nm Test Wavelength [OLP-1:1]: 1310/1550 Insertion Loss [OLP-1:1]: TX≤1.2 RX≤1.2
RD-OLP Independent Physical-Fiber Monitoring/Protection,Automatically Switches Degraded/Blocked Working Path to Backup in Real Time for Reliable Safe Flexible/Disaster-Resistant Networks.
Related Articles
As a core precision optical component for wavelength screening, frequency locking and spectral demodulation, optical etalons are widely used in high-end scientific research and precision laser equipment.
Shanghai Connet Laser Technology Co., Ltd. focuses on technological innovation, delivering cutting-edge photonic products & solutions for industrial lasers, LiDAR, fiber optic sensing, coherent telecom, cold atom physics and precision spectroscopy research & mass manufacturing.
A solid-state laser is one of the most common and reliable laser types used in modern industry, medical equipment, and scientific research. Unlike gas or fiber lasers, it uses solid materials as its gain medium to generate stable, high-brightness laser beams. Thanks to its high precision, long lifespan, and compact structure, solid-state lasers have become a mainstream solution for high-precision laser processing and optical systems.
Driven by worldwide energy‑structure transformation, the lithium‑ion battery industry is expanding rapidly as green, high‑efficiency energy‑storage devices gain surging global market demand. With years‑long dedication to intelligent manufacturing, Han’s Laser Lithium‑battery Intelligent Equipment has accumulated solid R&D strength and rich practical experience. By integrating multiple cutting‑edge technologies, the company delivers high‑efficiency, eco‑friendly and sustainable lithium‑ion battery production lines, bringing revolutionary upgrades to the new‑energy battery sector.
Loading...
Name
Phone
Organization
Use Case
Database Platform