MIR-554L — Low-Temperature Constant-Temperature Incubator (for Scientific Research)
A microcomputer PID temperature controller and compressor switching maintain small temperature fluctuations. PID uses proportional, integral and derivative control of the error between real-time measurements and setpoint. Operation is simple; data stores automatically and displays graphically on an LCD (liquid-crystal display). Select 24-hour clock or timer mode and store up to ten programs for repeated experiments. Programs support 12 continuous or repeated steps, repeated 1–98 times or indefinitely; see the MIR-554L-PC programming section. Automatic defrost runs daily at a set time. A program-timer controller switches one 15W fluorescent lamp. The MIR-L15 lighting accessory adds three or more lamps at the chamber top, giving approximately 3000lx at 30cm below the light.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| External Dimensions (W x D x H) | 800*832*1810（W*D*H, mm） |
| Internal Dimensions (W x D x H) | 640*550*1160（W*D*H, mm） |
| Temperature Range [Ambient Temperature: 5°C~35°C] | -10°C~+60°C |
| Net Weight | 195KG |
| Capacity | 406L |
| Rated Power | 285W |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
FORMULA-Series Green Lasers / Industrial Medium/High-Power Nanosecond Lasers
General Applications
Inno-laser
Wavelength: 532 nm Specified Frequency: 50 kHz Repetition Frequency Range: 10-300 kHz
FORMULA upgrades the AWAVE platform, retaining M2<1.2 spot quality while expanding the repetition range from 30–150kHz to 10–300kHz. Optimized high-rate power broadens applications and improves processing efficiency. AOC's leading intracavity frequency doubling is described as giving the highest conversion efficiency among comparable solid-state green lasers. Outputs of 20W, 35W and above 50W meet most nanosecond green-laser power needs. TTL/PWM control is supported, with internal-software PWF settings or PWM duty cycle adjusting power. Compact optoelectronic integration, beam quality, broad frequency range, flexible control and power coverage suit FPC/PCB cutting, solar-cell processing and wafer processing.
-
EVK4
General Applications
Daheng-imaging
Sensor: Sony IMX636ES Resolution: 1280×720 Pixel Size: 4.86μm
PROPHESEE EVK4 HD Ultralight Compact Versatile Event Kit,Sony/PROPHESEE Stacked IMX636ES,30×30×36mm for Tight Systems/Demanding Field Tests.
-
EVK5
General Applications
Daheng-imaging
Sensor: Sony IMX646 Resolution: 1280×720 Pixel Size: 4.86μm
PROPHESEE EVK5 HD Compact Fast Efficient Event Evaluation Kit,Sony/PROPHESEE Stacked IMX646,35×35×35.27mm,Optimized for China.
-
MCO-170AICDL — Carbon Dioxide Incubator (for Scientific Research)
General Applications
Situoli
External Dimensions (W x D x H): 620*755*905（W*D*H, mm） Internal Dimensions (W x D x H): 490*523*665（W*D*H, mm） Temperature Range: Ambient Temperature +5°C-50°C
Fewer internal parts improve shelf storage efficiency and cleaning, while perforated shelves distribute chamber temperature and gas uniformly. CO₂ recovers extremely quickly without overshoot, even with frequent outer-door opening and changes in temperature/humidity. The inCu-saFe copper-alloy stainless-steel chamber and optional SafeCell UV lamp provide an antimicrobial environment for uncontaminated cell culture. Sterilization is stated as 180℃ for 11 hours. Sensors and accessories need not be removed, and temperature/CO₂ need no recalibration afterward. One unit can continue culture while the other undergoes dry-heat sterilization.
Related Articles
Laser pump sources are the core energy input component of solid-state lasers and laser amplifiers, and their performance directly determines the output power, beam quality and service life of the entire laser system. In scenarios such as industrial processing, scientific research experiments and high-end equipment, improper pump source selection will not only result in substandard system performance, but also bring a series of problems such as rapid device degradation and high operation and maintenance costs. This article sorts out the core selection logic and key pitfalls of pump source procurement, and provides selection references based on mature, mass-produced high-reliability products to help purchasers efficiently screen suitable products.
Shandong Haucore Optoelectronics Co., Ltd. introduces the HGLD‑792‑COS‑D‑10WB semiconductor laser within its COS series. Delivering an output power of 10 W at a central wavelength of 792 nm, this device adopts gold‑tin bonding COS packaging. Featuring high reliability and long service life, it serves as a preferred pump source for solid‑state lasers and is widely deployed in industrial processing, laser display, medical & aesthetic treatment, scientific research and other fields.
Fomoptic delivers integrated one‑stop optical solutions covering precision optical fabrication and custom vacuum coating services. Supported by complete processing production lines, comprehensive metrology equipment and experienced engineering team, we provide full‑chain customized components, ranging from blank shaping, ultra‑precision polishing to thin‑film coating, for laser systems, infrared imaging, industrial optics and scientific‑research projects.
Fiber lasers and fiber amplification systems require excitation sources with stable wavelength, narrow spectral linewidth and consistent output power.
Loading...
Name
Phone
Organization
Use Case
Database Platform