Master 810/2410 Network Controller
LMI Master Hub is an advanced solution for distributing power and synchronization in multisensor networks. Master 810/2410 network controllers connect two or more sensors into a multisensor system, scaling easily from one sensor to 24. The new-generation controllers provide greater flexibility, support daisy-chaining through uplink/downlink ports, and accommodate differential or single-ended encoders and digital I/O.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Input Voltage [Refer to the Sensor Datasheet for Additional Power Required by the Sensor.] | +24 ~ 48 VDC |
| Power [Refer to the Sensor Datasheet for Additional Power Required by the Sensor.] | 2 W |
| Total Power | Master 810/2410 Input Power + (Sensor Input Power×Number of Sensors) |
| Capacity | Master 810 Supports up to 8 Sensors; Master 2410 up to 24 Sensors |
| I/O [Gocator Supports Only One Digital Input] | 4 Digital Inputs**;Single-Ended Active Low:0~+0.8VDC;Single-Ended Active High:+3.3~+24VDC;Differential Low:0.8~-24VDC;Differential High:+3.3~+24VDC;10-Pin Phoenix Interface |
| Encoder [Supports Open Collector, Pull-Up Resistor, Line Driver, Push-Pull and TTL] | Differential(5VDC,12VDC);Single-Ended(5VDC,12VDC)***;11-Pin Phoenix |
| LED Indicators | Safety, Power, Encoder, Input |
| Cable | Dual CAT5e Cables for Power/Safety/Synchronization/Data |
Key Features
Datasheet
Supplier Information
Related Products
-
Bochu Control System
Automation and Control
Auroralaser
FSCUT2000 is a High-performance Open loop laser control system. Widely used in the field of metal and Non-metal laser cutting. Easy to install,Easy to Debug.
-
Industrial Rail-Mount 1-4-Channel RS-232/RS-422/RS-485 Serial Server
Automation and Control
Fiberwdm
Product Function Description: Transmits 1-4 RS232/422/485 serial channel(s) over Ethernet; industrial rail-mounted design Service Port Description: 1-4 RS232/422/485 Interfaces; 1 100-Megabit Ethernet Electrical Port / 1 Optical Port Power Supply: Redundant Dual Power Inputs DC9-55V or AC7-43V, Power Consumption <5W; Overload, Reverse-Polarity and Redundancy Protection Supported; 4-Pin Pluggable Terminal with 5.08mm Pitch
This IP40 industrial rail-mount serial server immediately networks serial equipment and centrally manages distributed serial devices/hosts. One to four RS-232/RS-422/RS-485 channels connect to one 100M Ethernet Comb port, offering either a 100M electrical or optical interface. 35mm rail or wall mounting suits varied sites. Protocols include TCP, UDP, ARP, ICMP, HTTP, DNS, DHCP and SNMP. Access control, quick configuration, online upgrades and web access are supported; each serial port offers four TCP connections and other modes. A Windows configuration tool guides setup step by step for easy networking. A friendly interface simplifies operation. Fanless, low-power, wide-temperature/voltage hardware passes rigorous industry-standard tests for demanding EMC environments. Uses include PLC control, building automation, healthcare automation, instruments and environmental/power monitoring.
-
Industrial Rail-Mount 8-Channel RS-232/RS-422/RS-485 Serial Server
Automation and Control
Fiberwdm
Product Function Description: Transmits 8 RS232/422/485 serial channel(s) over Ethernet; industrial rail-mounted design Service Port Description: 8 RS232/422/485 Serial Interfaces; 2 100-Megabit Ethernet Electrical Ports Power Supply: Redundant Dual Power Inputs DC9-55V or AC7-43V, Power Consumption <5W; Overload, Reverse-Polarity and Redundancy Protection Supported; 4-Pin Pluggable Terminal with 5.08mm Pitch
This IP40 industrial rail-mount serial server immediately networks serial devices and centrally manages distributed equipment/hosts. One to eight RS-232/RS-422/RS-485 channels connect to two100M Ethernet ports for dual IP/MAC addresses, multiple-network management or backup. 35mm rail/wall mounting is supported. Protocols include TCP, UDP, ARP, ICMP, HTTP, DNS, DHCP, SNMP, Telnet, SSH and MQTT. Management offers access control, quick configuration, online upgrades and web access. Each serial port supports four TCP/UDP sessions, Modbus TCP, TCP Server/Client, UDP Server/Client and Modbus-to-MQTT. A Windows tool enables networking through simple settings, with a friendly interface. Fanless, low-power, wide-temperature/voltage hardware passes industry-standard tests for demanding EMC sites. Uses include PLC control, building/healthcare automation, instruments and environmental/power monitoring.
-
Industrial Rail-Mount 16-Channel RS-232/RS-422/RS-485 Serial Server
Automation and Control
Fiberwdm
Product Function Description: Transmits 16 RS232/422/485 serial channel(s) over Ethernet; industrial rail-mounted design Service Port Description: 16 RS232/422/485 Serial Interfaces; 2 100-Megabit Ethernet Electrical Ports Power Supply: Redundant Dual Power Inputs DC9-55V or AC7-43V, Power Consumption <5W; Overload, Reverse-Polarity and Redundancy Protection Supported; 4-Pin Pluggable Terminal with 5.08mm Pitch
This IP40 industrial rail-mount serial server immediately networks serial equipment and centrally manages distributed serial devices/hosts. It connects sixteen RS-232/RS-422/RS-485 channels to two100M Ethernet ports, supporting dual IP/MAC addresses, multiple-network management or network backup. 35mm rail or wall mounting suits varied sites. Protocols include TCP, UDP, ARP, ICMP, HTTP, DNS, DHCP, SNMP, Telnet and SSH. Access control, quick configuration, online upgrades and web access are supported. Each serial port allows four TCP/UDP sessions, with Modbus TCP, TCP Server/Client and UDP Server/Client modes. A Windows management tool simplifies configuration for easy networking through simple settings. A friendly interface is easy to operate. Fanless, low-power, wide-temperature/voltage hardware passes rigorous industry-standard tests for demanding EMC environments. Uses include PLC control/management, building automation, healthcare automation, instruments and environmental/power monitoring.
-
Industrial Rail-Mount 1-Channel Mini RS-232/RS-422/RS-485 Serial Server
Automation and Control
Fiberwdm
Product Function Description: Transmits 1 RS232/422/485 serial channel(s) over Ethernet; industrial rail-mounted design Service Port Description: 1 RS232/422/485 Serial Terminal Interface, 1 DB9 Male, 1 100-Megabit Ethernet Electrical Port Power Supply: DC Supply:Dual Redundant DC9–70V or AC7–50V,<5W;Overload,Reverse-Polarity and Redundancy Protection;4-Pin5.08mm Plug-In Terminal;Internal AC Supply:AC85–265V or DC110–300V,<5W;Overload Protection;Three-Position Cloverleaf AC Socket
This IP40 industrial rail-mount serial server immediately networks serial equipment and centrally manages distributed serial devices/hosts. It connects one RS-232/RS-422/RS-485 channel to one100M Ethernet port. 35mm rail or wall mounting suits varied sites. Protocols include TCP, UDP, ARP, ICMP, HTTP, DNS, DHCP and SNMP. Access control, quick configuration, online upgrades and web access are supported. Each serial port allows four TCP/UDP sessions, with Modbus TCP, TCP Server/Client and UDP Server/Client modes. A Windows management tool guides setup step by step for easy networking through simple settings. A friendly interface is easy to operate. Fanless, low-power, wide-temperature/voltage hardware passes rigorous industry-standard tests for demanding EMC environments. Uses include PLC control/management, building automation, healthcare automation, instruments and environmental/power monitoring.
Related Articles
In photonics and laser technology, devices that manipulate optical signals via the electro-optic effect form the backbone of precision optical systems. Electro-optic phase modulators and electro-optic deflectors are two prominent examples of this device category. As a critical hardware solution for high-speed, high-accuracy laser beam direction control, electro-optic deflectors are widely deployed across industrial and research settings. Below is a detailed overview of their core structure, key performance drivers, and primary use cases.
GYOPTICS 30 W collimated isolator is a highly‑reliable passive optical component optimized for 1064 nm high‑power laser systems. Characterized by low insertion loss and superior backward‑light suppression capability, it effectively blocks reflected light traveling back toward the laser resonator, eliminating back‑reflection‑induced instability and protecting fiber or solid‑state laser sources during long‑term operation.
For 1D optical detection scenarios such as spectrum acquisition, dimensional measurement and optical scanning, area array CMOS/CCD suffer redundant pixels, high cost and slow row readout speed.
Laser pump sources are the core energy input component of solid-state lasers and laser amplifiers, and their performance directly determines the output power, beam quality and service life of the entire laser system. In scenarios such as industrial processing, scientific research experiments and high-end equipment, improper pump source selection will not only result in substandard system performance, but also bring a series of problems such as rapid device degradation and high operation and maintenance costs. This article sorts out the core selection logic and key pitfalls of pump source procurement, and provides selection references based on mature, mass-produced high-reliability products to help purchasers efficiently screen suitable products.
Loading...
Name
Phone
Organization
Use Case
Database Platform