Visual High-Precision Laser Processing Head Hawkeye-X
Hawkeye-X precision laser-processing heads with vision combine a large-beam two-axis galvanometer, high-magnification/high-sensitivity CCD imaging, achromatic scan-focusing optics, beam delivery and mechanical components. Broad compatibility supports varied lasers and workpiece shapes. Sensitive CCD imaging gives accurate, low-latency positioning; Thorlabs achromatic scan-focusing lenses maintain uniform spots across the scan field. Positioning arbitrary shapes, edge finding and fixed-size processing are supported, especially precise work on tiny parts, with a wide field and high processing/positioning accuracy. Optional wavelength-matched achromatic or F-Theta scan lenses and professional software provide easy use/setup and stable operation for research/industrial precision laser processing.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Clear Aperture | 10 mm |
| Repeatability | 2 μrad |
| Maximum Scan Angle | ±20° |
| CCD System Frame Rate | 60 fps |
| Positioning Latency | 20 μs |
| Resolution | 1280 x 1024 |
| Magnification | 7.5× |
| Optional Configuration | Scanning Focusing Objective or F-Theta Scan Field Lens |
| Damage Threshold [515nm；10ns；10Hz；?0.491mm] | 8 J/cm² |
| Damage Threshold [1030nm；10ns；10Hz；?1.010mm] | 5 J/cm² |
| Focusing Objective Interface Dimensions | M 25 |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
TODC-L Settling Box Type Sinking Flow Dust Collector
Tools and Machinery
Auroralaser
Under the strong negative pressure of the turbo fan, when the polluted air enter the air inlet, it first hits the baffle plate in the air inlet room, which acts as a baffle for the incoming air and slows down the flow velocity. Due to the gravity settlement, the coarse dust falls directly into the large particle dust port, which plays the role of pre-dust removal. After the fine-grained and low-density dust particles enter the dust filter chamber, the dust in the air stays on the surface of the filter cartridge, and the filtered clean air enters the air chamber and is collected by the exhaust pipe to through the fan to outlet and discharged.
-
TODC-P Series Dust Collector
Tools and Machinery
Auroralaser
TODC-P series dust collector is the first in the world to use gravity and downward airflow to promote the self-purification process, dusty air enters from the top and exits from the top on the other side. The principle of dust removal makes the direction of the dust-carrying air flow consistent with the direction of gravity, so that the dust is easier to settle and remove, and will be brought back to the filter element. When the dust collector is running, the dust-laden air enters the DFT dust collector from the top inlet, through the filter cartridge, the dust is collected on the outer surface of the filter cartridge, and the clean air is released into the clean air chamber through the center of the filter cartridge, and then passes through the filter cartridge for cleaning, so the high-pressure compressed air will rush directly into the center of the filter cartridge and blow off the dust on the surface of the filter cartridge. The dust follows the main air flow and falls down into the ash hopper under the action of gravity. The down flow dust collector can eradicate the problem of "secondary dust cleaning" and also improve the dust removal efficiency. (See the schematic diagram of the dust collector right side)
-
All-steel Type Standard Clean Bench
Tools and Machinery
Auroralaser
Cleanliness level [≥ 0.5μm (Federal Standard 209e)]: 100 level cleanliness level Dust particle [Diameter of 0.5μm]: Filtering efficiency 99.995% Average wind speed: 0.25m~0.45m/s (Fast and slow dual speed)
-
Au3tech A230E
Tools and Machinery
Auroralaser
Max Laser Power: 3000 W Focus Lens: D=30mm,F=125/150mm Collimator Lens: D=30mm,F=100mm
A230E/A23E Laser Cutting Head A smart cutting head specifically designed for medium to high power laser cutting, supporting electric focusing function. Internally integrated sensors, controllers, and transmission components. Equipped with a fiber optic cutting CNC system, it perfectly realizes a fully automated cutting process.
-
Au3tech A230E A235E
Tools and Machinery
Auroralaser
Max Laser Power: 3000 W Focus Lens: D=30mm,F=150mm Collimator Lens: D=30mm,F=100mm
A230E/A23E Laser Cutting Head A smart cutting head specifically designed for medium to high power laser cutting, supporting electric focusing function. Internally integrated sensors, controllers, and transmission components. Equipped with a fiber optic cutting CNC system, it perfectly realizes a fully automated cutting process.
Related Articles
Laser pump sources are the core energy input component of solid-state lasers and laser amplifiers, and their performance directly determines the output power, beam quality and service life of the entire laser system. In scenarios such as industrial processing, scientific research experiments and high-end equipment, improper pump source selection will not only result in substandard system performance, but also bring a series of problems such as rapid device degradation and high operation and maintenance costs. This article sorts out the core selection logic and key pitfalls of pump source procurement, and provides selection references based on mature, mass-produced high-reliability products to help purchasers efficiently screen suitable products.
Shandong Haucore Optoelectronics Co., Ltd. introduces the HGLD‑792‑COS‑D‑10WB semiconductor laser within its COS series. Delivering an output power of 10 W at a central wavelength of 792 nm, this device adopts gold‑tin bonding COS packaging. Featuring high reliability and long service life, it serves as a preferred pump source for solid‑state lasers and is widely deployed in industrial processing, laser display, medical & aesthetic treatment, scientific research and other fields.
Fomoptic delivers integrated one‑stop optical solutions covering precision optical fabrication and custom vacuum coating services. Supported by complete processing production lines, comprehensive metrology equipment and experienced engineering team, we provide full‑chain customized components, ranging from blank shaping, ultra‑precision polishing to thin‑film coating, for laser systems, infrared imaging, industrial optics and scientific‑research projects.
Fiber lasers and fiber amplification systems require excitation sources with stable wavelength, narrow spectral linewidth and consistent output power.
Loading...
Name
Phone
Organization
Use Case
Database Platform