-
BBO Pokcels Cells With Square Structure CPBPC-02502525-152833-S
Optical Crystals
Coupletech
Aperture: 2.2mm
Crystal size: 2.5 mm × 2.5 mm × 25 mm
PC size: 15x28x33mm Square
BBO pokcels cells with square structure is product independently developed by Coupletech. Coupletech is the supplier of BBO pokcels cells of China. BBO pokcels cells with square structure is special applied to smaller space in laser, and the design of BBO pockels cells with square structure is easier to fix in the laser. BBO pokcels cells with square structure has been tested by the market, it's a very mature product. BBO pokcels cells with square structure has plenty stock, it's one of the main products currently promoted by Coupletech. The aperture of BBO pokcels cells with square structure is 2.2mm, the crystal of BBO pokcels cells with square structure size is 2.5x2.5x25mm, the quarter wave voltage is 2400V, so the BBO pokcels cells with square structure has lower working voltage for wider application. β-BBO crystal(Beta barium borate crystal)is a very excellent electro-optical (EO)crystal. BBO-based Pockels cells are used to change the polarization state of light passing through it when a voltage is applied to the electrodes of BBO electro-optic crystals. We provide high quality products and solution design of BBO pokcels cells. At the same time, we also provide after-sales technical support. Typical applications include Q-switching of the laser cavity, laser cavity dumping and coupling light into and from regenerative amplifiers. The transparency range is 213nm - 2000nm. Low piezoelectric ringing makes BBO Pockels cell attractive for the control of high-power and high repetition rate lasers. Fast switching electronic drivers properly matched to the cell are available for Q-switching, cavity dumping, regenerative amplifiers and other applications. BBO Pockels cells are transverse field devices. The quarter-wave voltage is proportional to the ratio of electrode spacing and crystal length, therefore, smaller aperture, lower quarter-wave voltage, besides, double crystal design, which has lower quarter-wave voltage, is widely used to work in half-wave mode with fast switching times.
-
Deuterated Potassium Dihydrogen Phosphate DKDP Crystal DKDP/KDP-WHL
Optical Crystals
Coupletech
Aperture: 1-10mm
Length: 1-10mm
KDP ( Potassium Dihydrogen Phosphate ) crystal and DKDP ( KD*P or Potassium Dideuterium Phosphate ) crystal feature large size with good UV transmission, high damage threshold and high birefringence, though their NLO coefficients are relatively low. They are commonly used for doubling, tripling and quadrupling of Nd laser. In addition, they are also excellent electro-optic crystals with high electro-optic coefficients, widely used as electro-optical modulators, EO Q-Switches, etc. Coupletech provides high quality DKDP and KDP crystal devices and DKDP Pockels Cells in high power laser frequency conversion application as well as shutter for high speed photography, Electro-optical modulator and Q-switches as Electro-optic Components. Coupletech can achieve the aperture as large as 200x200x50mm3, also supplies sealed housing for preservation, due to KDP and DKDP crystals are easier to be moistened. Besides, Coupletech offers DKDP Pockels Cell driver, Driver Board and other kinds of Laser electronics, for matching with DKDP EO Cells.
-
Infrared nonlinear AgGaS2 Crystal AGS-WHL
Optical Crystals
Coupletech
Aperture: 1-15mm
Aperture: 1-15mm
Length: 1-50mm
Infrared nonlinear crystals AGS ( AgGaS2 ) is transparent from 0.53 to 12 µm. Although its Nonlinear Optical Crystal coefficient is the lowest among the above mentioned infrared crystals, high short wavelength transparency edging at 550 nm is made use of in OPOs pumped by Nd:YAG laser; in numerous difference frequency mixing experiments with diode, Ti:Sapphire, Nd:YAG and IR dye lasers covering 3–12 µm range; in direct infrared counter measure systems, and for SHG of CO2 laser. Thin Nonlinear Optical Materials AgGaS2 (AGS) IR materials crystal plates are popular for ultrashort pulse generation in mid IR range by difference frequency generation employing NIR wavelength pulses. NLO Crystals AGS and AGSe2 both are excellent IR crystals. Applications: • Generation second harmonics on CO and CO2 - lasers • Optical parametric oscilator - OPO • Different frequency generator to middle infrared regions up to 12 mkm. • Frequency mixing in the middle IR region from 4.0 to 18.3 µm - IR Crystals • Tuneable solid state lasers (OPO pumped by Nd:YAG and others lasers operating in 1200 to 10000 nm region with efficiency 0.1 to 10 %) • Optical narrow-band filters in the region near isotropic point (0.4974 m at 300 °K), transmission band being tuned at temperature variation • Up-conversion of CO2 laser radiation image into near-IR or visible region by using/ or use of Nd:YAG Crystals, ruby or dye lasers with efficiency up to 30 % Optical Crystal AgGaS2: Melting Point 851 °C Density 5.700 g/cm3 Mohs Hardness 3-3.5 Wavefront distortion less than λ/6 @ 633 nm Flatness λ/6 @ 633 nm Surface Quality 20/10 Parallelism better than 1 arc min Perpendicularity 5 arc minutes
-
Infrared nonlinear AgGaSe2 Crystal AgGaSe2-WHL
Optical Crystals
Coupletech
Aperture: 1-15mm
Length: 1-50mm
COATINGS: AR Coatings, P Coatings
Infrared nonlinear AGSe2 crystals, AgGaSe2(AgGa(1-x)InxSe2) Nonlinear Crystal has band edges at 0.73 and 18 µm. Its useful transmission range (0.9–16 µm) and wide phase matching capability provide excellent potential for OPO applications when pumped by a variety of different lasers. Tuning within 2.5–12 µm has been obtained when pumping by Ho:YLF laser at 2.05 µm; as well as non-critical phase matching (NCPM) operation within 1.9–5.5 µm when pumping at 1.4–1.55 µm. AgGaSe2 (AgGaSe) has been demonstrated to be an efficient frequency doubling NLO Crystals for infrared CO2 lasers radiation. Applications of IR materials AgGaSe2: • Generation second harmonics on CO and CO2 - lasers • Optical parametric oscilator • Different frequency generator to middle infrared regions up to 17 mkm. • Frequency mixing in the middle IR region
-
KTP Crystal for SHG and OPO KTP-WHL
Optical Crystals
Coupletech
Model No.: KTP-WHL
Brand: Coupletech
Aperture: 1-15mm
Nonlinear Optical Crystal Potassium Titanyl Phosphate (KTiOPO4 or KTP) crystal is one of the most efficient nonlinear Optical Crystal and have been used in frequency doubling of IR lasers and OPO to mid-IR spectral region, and it has a lot of excellent properties such as high nonlinear optical coefficient, high thermal conductivity, so it is not sensitive to the temperature change. KTP is widely used in SHG, OPO and OPA applications. KTP OPO component: KTP Crystals are placed in an oscillation cavity which consists two mirrors or lens, or just on piece of KTP crystal is coated HR coatings without mirrors and lens. Coupletech provides broad KTP OPO range from visible to mid-IR for parametric sources for tunable outputs, especially siginal light 1572nm. Coupletech produces high quality single domain KTP crystals and components for OPO, OPA, SHG, SFG & DFG applications, as well as substrates for Optical Waveguides and E-O Modulators. Coupletech has strict quality control and provides quantity discount for all kinds of Optical Crystal, i.e. Nd:YAG Crystals , Nd:YVO4 Crystals , Cr:YAG Crystals, Diffusion Bonded Crystals, KTP Crystals, BBO Crystals, LBO Crystals, BIBO Crystals, KTA Crystals, LN Crystals. Orientation:<0.2 deg, Flatness: KTP-10106 is the size 10 x 10 x 6mm S1: AR coatings at 1064 & 532nm, S2: AR coatings at 1064 & 532nm KTP-050520-03 is the size 5 x 5 x 20mm S1: AR coatings at 1064nm & 1572nm; S2: AR coatings at 1064nm & 1572nm KTP-050520-01 is the size 5 x 5 x 20mm S1: HR at 1572nm, HT at 1064nm + 3300nm; S2: PR ( R=55% ) at 1572nm, HT at 1064nm&3300nm. KTP-050520-02 is the size 5 x 5 x 20mm S1: HR at 1572nm, HT at 1064nm&3300nm; S2: HR at 1064nm, PR ( R=55% ) at 1572nm, HT@3300nm