Mode Field Adapter (MFA)
思创激光 MFA Connects Different MFD and Source“Numerical-Aperture Diameters”(NA),Maximizes Fundamental-Mode Signal at Splice,for Fiber Lasers/Amplifiers/Research.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Input Fiber [Input Fiber 10/130; Output Fiber 14/250] | 10/130 |
| Output Fiber [Input Fiber 10/130; Output Fiber 14/250] | 14/250 |
| Insertion Loss [Input Fiber 10/130; Output Fiber 14/250] | ＜0.5 |
| Input Fiber [Input Fiber 14/250; Output Fiber 20/400] | 14/250 |
| Output Fiber [Input Fiber 14/250; Output Fiber 20/400] | 20/400 |
| Insertion Loss [Input Fiber 14/250; Output Fiber 20/400] | ＜0.5 |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
FTTA DLC-DLC-UPC SM 2C 5.0 ARMORED Cable DLC/UPC-DLC/UPC-SM-2C-LSZH-5.0mm-ARMORED
Optical Networking Accessories
Fiberwdm
Parts list-1-Flexible armored cable: 1 Parts list-2-Gland [Ceragon p/n AA-0597-0]: 1 Parts list-3-Stopper. OD- 11.5±0.3mm: 2
DLC/PC-DLC/PC-SM(G657A2)-DX-5.0mm-LSZH-XXM Main cable armord,2.0mm branch cable, One side Non-armored branch with M28 plastic Gland And stoppers. The other side (side B) armorde branch with mesh Kevlar to increase tensile strength.
-
MTP/MPO Trunk Cable
Optical Networking Accessories
Fiberwdm
Polish [Standard SM MT Ferrule; Polish APC]: APC IL [Standard SM MT Ferrule; Polish APC; Typical]: 0.50 dB IL [Standard SM MT Ferrule; Polish APC; Maximun]: 0.70 dB
Pre-connector MTP/MPO Trunk Cable Assemblies are made up of 12, 24, 48 fiber LSZH jacketed micro cables terminated at both ends with MTP/MPO Connectors (without pins). These are used as backbone or horizontal cable interconnections . These plug and play solutions with micro core cable maximize bend radius and minimize cable weight and size. MTP/MPO Trunk Cable are factory pre-terminated, tested and packed along with the test reports. These assemblies are available in OM3, OM4 and SM fiber. Standard lengths of 5, 10, 25 meters are available. Custom lengths are also available on request. The MTP/MPO Trunk cables are packed as coils in lengths up to 50m long and on reels . OM3 and OM4 cables are available in aqua and SM cables are in yellow color.
-
MPO-LC Adapter Equipment
Optical Networking Accessories
Fiberwdm
IL (Insertion Loss) [Single-Mode MPO/APC; Insertion and Return Loss Refer to Equipment End, Excluding External Patch Fibers]: ≤0.35dB RL (Return Loss) [Single-Mode MPO/APC; Insertion and Return Loss Refer to Equipment End, Excluding External Patch Fibers]: ≥45 dB Fiber Type [Single-Mode - MPO/APC]: SMF-28e
1U,Ten MPO/UPC40G/100G to40 Duplex LC/UPC10G/25G Channels.
-
LC/SC/FC/ST Fiber Patch Cord
Optical Networking Accessories
Fiberwdm
Operating Wavelength [FC, SC, LC-SM-UPC]: 1310/1550 Diameter [FC, SC, LC-SM-UPC]: 0.9mm, 2.0mm, 3.0mm Insertion Loss [FC, SC, LC-SM-UPC]: ≤ 0.3 dB
Optical Fiber Patch Cord
-
ODF Fiber Distribution Frame
Optical Networking Accessories
Fiberwdm
Operating Wavelength: 850nm、1310nm、1550nm Insertion Loss: ≤0.3dB Return Loss: PC≥40dB、UPC≥50dB、APC≥60dB
High-Density/Capacity ODF for Cable Termination/Connection/Distribution,Entry/Fixing/Protection,Splicing to Pigtails,Repatching,Jumper/Fiber/Pigtail Storage/Protection.
Related Articles
Founded in 2019, Jilin JC Ultrafast Equipment Co., Ltd. is a high-tech enterprise incubated by the Ultrafast Optoelectronics Center of Jilin University. Our R&D team owns 15 years of profound experience in femtosecond laser micro-nano fabrication.
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
Driven by the rapid upgrading of intelligent vehicles, optoelectronic sensing technologies represented by laser sensing and infrared thermal imaging have become core pillars for high-level autonomous driving and smart cockpit iteration. Leveraging automotive-grade optoelectronic R&D advantages, Pilot Technology Group launches the VITAL intelligent vehicle solution. By integrating high-power VCSEL laser chips and vehicle infrared night-vision thermal imagers, the system comprehensively enhances vehicle environmental perception and realizes safer, smarter and more comfortable driving experiences.
The MSL‑T series water‑cooled continuous‑wave single‑longitudinal‑mode lasers from Changchun New Industries Optoelectronics (CNI) deliver key research wavelengths including 369 nm, 405 nm and 770 nm.
Loading...
Name
Phone
Organization
Use Case
Database Platform