Screwdriver/Hex Key CI-BDR

Main Wrench Material: 303 Stainless Steel+SKD11 Surface Treatment: Surface Passivation Adjustable Diameter Range: 3-75 mm

JCOPTIX offers retaining-ring spanners, pin spanners, adjustable spanners, and lock-ring spanners in various sizes to adjust standard rings, threaded adapters, and spanner holes in optomechanics. Retaining-ring and pin spanners are hollow so adjustment does not block the beam. Knurled handles facilitate grip, and stainless-steel working ends reduce wear. Adjustable spanners offer two rapidly interchangeable tip forms. Turning the central handwheel adjusts tip spacing with automatic centering and one-handed operation. Two lock-ring spanners also make installation/removal easier than hand-turning knurled rings. Retaining-ring spanners. Models: MBT-SM05, MBT-SM1, MBT-SM2. For standard retaining-ring threads; knurled handles; stackable designs adjust rings in long lens tubes. JCOPTIX spanners adjust standard optomechanical retaining rings. Hollow construction leaves the beam unobstructed. The knurled handle aids grip, while the flange holds the ring at the tool end during insertion/removal without damaging optics. Stainless-steel flanges wear less than aluminum and have tight tolerances. Uncoated flanges minimize dust or particle contamination of lens surfaces. MBT-SM1 has an external depth scale for precise optic positioning; MBT-SM05 is stackable for rings in long tubes. Adjustable spanners. Models: MBT-ASW, MBT-ASWB. Material: 303 stainless steel + SKD11; passivated; adjustable slot-center spacing 3-75 mm; for rings or threaded adapters with cylindrical pin holes or straight slots; quickly interchangeable offset-tapered cylindrical and flat tips. This common laboratory tool adjusts jaw spacing by a central handwheel driving a bidirectional screw. The 3-75 mm spacing adjustment is self-centering and can be operated one-handed. Both guide rods carry numerical scales for positioning. Choose either offset-tapered cylindrical or flat tips. To reverse a blade assembly, loosen its M4 set screw with the supplied 2 mm hex key, turn it to the other end, then retighten similarly. The MBT-ASWB blade assembly is sold separately. Spanner for externally threaded adapters. Model: MBT-SM1A. For SM1 adapters; knurled handle; pin diameter 1 mm; pin spacing 20.3 mm. This hollow JCOPTIX pin spanner adjusts SM1 adapters such as FADT-11 and MTA-SM1C without blocking the beam. Its knurled handle aids grip, and stainless-steel pins reduce wear. The pins are 1 mm in diameter with 20.3 mm center spacing, also fitting other optomechanics with matching holes for adjustment or securing. Spanners for slotted lock rings. Models: MBT-SWS1, MBT-SWS2. 316L stainless steel; easier installation/removal; greater torque and more reliable locking. Each of the two tools is marked with matching lock-ring outside diameters. MBT-SWS1 fits SM05, SM1, and C-Mount rings; MBT-SWS2 fits SM2 rings. Compared with hand-turning knurled rings, these tools make installation/removal easier and provide greater tightening torque and more reliable locking.

Main Wrench Material: SKD11 Surface Treatment: Surface Passivation type: text

JCOPTIX offers retaining-ring spanners, pin spanners, adjustable spanners, and lock-ring spanners in various sizes to adjust standard rings, threaded adapters, and spanner holes in optomechanics. Retaining-ring and pin spanners are hollow so adjustment does not block the beam. Knurled handles facilitate grip, and stainless-steel working ends reduce wear. Adjustable spanners offer two rapidly interchangeable tip forms. Turning the central handwheel adjusts tip spacing with automatic centering and one-handed operation. Two lock-ring spanners also make installation/removal easier than hand-turning knurled rings. Retaining-ring spanners. Models: MBT-SM05, MBT-SM1, MBT-SM2. For standard retaining-ring threads; knurled handles; stackable designs adjust rings in long lens tubes. JCOPTIX spanners adjust standard optomechanical retaining rings. Hollow construction leaves the beam unobstructed. The knurled handle aids grip, while the flange holds the ring at the tool end during insertion/removal without damaging optics. Stainless-steel flanges wear less than aluminum and have tight tolerances. Uncoated flanges minimize dust or particle contamination of lens surfaces. MBT-SM1 has an external depth scale for precise optic positioning; MBT-SM05 is stackable for rings in long tubes. Adjustable spanners. Models: MBT-ASW, MBT-ASWB. Material: 303 stainless steel + SKD11; passivated; adjustable slot-center spacing 3-75 mm; for rings or threaded adapters with cylindrical pin holes or straight slots; quickly interchangeable offset-tapered cylindrical and flat tips. This common laboratory tool adjusts jaw spacing by a central handwheel driving a bidirectional screw. The 3-75 mm spacing adjustment is self-centering and can be operated one-handed. Both guide rods carry numerical scales for positioning. Choose either offset-tapered cylindrical or flat tips. To reverse a blade assembly, loosen its M4 set screw with the supplied 2 mm hex key, turn it to the other end, then retighten similarly. The MBT-ASWB blade assembly is sold separately. Spanner for externally threaded adapters. Model: MBT-SM1A. For SM1 adapters; knurled handle; pin diameter 1 mm; pin spacing 20.3 mm. This hollow JCOPTIX pin spanner adjusts SM1 adapters such as FADT-11 and MTA-SM1C without blocking the beam. Its knurled handle aids grip, and stainless-steel pins reduce wear. The pins are 1 mm in diameter with 20.3 mm center spacing, also fitting other optomechanics with matching holes for adjustment or securing. Spanners for slotted lock rings. Models: MBT-SWS1, MBT-SWS2. 316L stainless steel; easier installation/removal; greater torque and more reliable locking. Each of the two tools is marked with matching lock-ring outside diameters. MBT-SWS1 fits SM05, SM1, and C-Mount rings; MBT-SWS2 fits SM2 rings. Compared with hand-turning knurled rings, these tools make installation/removal easier and provide greater tightening torque and more reliable locking.

Ball-End Screwdriver Material and Surface Finish: Protanium (Special Chrome-Vanadium Steel), Fine Polished and Blackened Hex Key Material and Surface Finish: S2 Alloy Steel, Fine Satin Nickel Finish

JCOPTIX supplies ball-end drivers, hex keys, screwdrivers, and organizers for quick optomechanical assembly. CI-BDR-KIT drivers are BONDHUS, USA; CI-DTS-7S, CI-DTMS-7, CI-DLM-S9N hex-key kits are DAREX, Taiwan. Organizers store different keys, and multiple kit specifications meet varied needs. Hex-key kits. Models: CI-DTS-7S, CI-DTMS-7, CI-DLM-S9N. Seven- or nine-piece options; long handles; S2 special alloy steel; marked holders. Keys install/remove socket screws. Colored kits include nine sizes 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0 mm; natural-finish kits include seven sizes 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0 mm. Chrome-plated S2 provides appearance, rust/wear resistance, high torque, and easy use. Marked plastic holders prevent slipping and organize tools. Imperial hex-key kits. Models: CI-BLX8, CI-HLX12. 8 or 12 pieces; ball/flat ends; extended handles. Options are 8-piece ball-end or 12-piece flat-end sets. The 8-piece set contains 0.05, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32 inch, 8 sizes. The 12-piece set contains 0.05, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16 inch, 12 sizes. Imported US Protanium special chromium-vanadium steel is polished/blackened for hardness/wear resistance. Marked plastic holders aid storage/access. Ball-driver organizer/kit for optical tables. Models: CI-BDR-KIT, CI-BDR. Easy organization; organizer alone or with tools; table/breadboard mounting. CI-BDR-KIT includes six ball-end drivers, six hex keys, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, and one CI-BDR rack. Polished/blackened Protanium drivers and S2 keys with the source-described fine satin-nickel finish provide wear/corrosion resistance and high torque. Hole-size markings guide storage. Ball-end hex-driver kit with case. Model: CI-BD-KIT. Plastic tool case; US Protanium; quality plastic-rubber handles. Six drivers, 1.5, 2, 2.5, 3, 4, 5 mm, come with a custom-lined case. Polished/blackened Protanium provides wear/corrosion resistance and torque. Comfortable nonslip plastic-rubber handles and a six-tool fitted case/outer box facilitate storage/use. Thumb-operated hex keys. Models: CI-HKT-KIT, CI-HKT1.5-P4, CI-HKT2-P4, CI-HKT2.5-P4, CI-HKT3-P4, CI-HKT5-P4. For socket adjusters/screws; sizes 1.5, 2, 2.5, 3, 4, 5 mm; black-anodized knurled knobs with size marks; replaceable S2 hex tips; packs of four. These keys adjust sockets such as MMM-05 mounts and can remain inserted for convenience. Polished, hardened, red-finished S2 tips provide wear/corrosion resistance and high torque. Black-anodized aluminum knobs hold tips with set screws; reverse worn tips for further use. The source names HWS-KIT with one each of 1.5 mm, 2 mm, 2.5 mm, 3 mm, 5 mm, five total; other models contain four of one size. Color-coded screwdriver kit. Model: CI-SK1. Six types; chromium-molybdenum-vanadium tips as listed; antiroll handles. The body text specifies chromium-vanadium steel, with blackened/hardened tips. It includes 3 Phillips drivers, #1, #0, #00, and 3 slotted drivers, 1.4mm, 1.8mm, 2.4mm, for daily use. Rotating ends ease handling. Precision drivers with aluminum handle. Model: CI-SD9608. 28 precision bits; aluminum handle with built-in extension. The set includes 28 chromium-vanadium bits: slotted, Phillips, hex, triangular, and star types for electronics repair. A rotating tail cap aids precise screw positioning; an internal extension reaches confined spaces. CI-BD-KIT brand: BONDHUS, USA, from this model's original details. Common page information covers the group's combined uses/types, not all types for each model: applications—socket-head, slotted, and Phillips screws; types—hex keys/screwdrivers/drivers.

Hex Ball-End Material and Surface Finish: Protanium (Special Chrome-Vanadium Steel), Fine Polished and Blackened Handle Material: High-Quality Plastic Rubber

JCOPTIX supplies ball-end drivers, hex keys, screwdrivers, and organizers for quick optomechanical assembly. CI-BDR-KIT drivers are BONDHUS, USA; CI-DTS-7S, CI-DTMS-7, CI-DLM-S9N hex-key kits are DAREX, Taiwan. Organizers store different keys, and multiple kit specifications meet varied needs. Hex-key kits. Models: CI-DTS-7S, CI-DTMS-7, CI-DLM-S9N. Seven- or nine-piece options; long handles; S2 special alloy steel; marked holders. Keys install/remove socket screws. Colored kits include nine sizes 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0 mm; natural-finish kits include seven sizes 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0 mm. Chrome-plated S2 provides appearance, rust/wear resistance, high torque, and easy use. Marked plastic holders prevent slipping and organize tools. Imperial hex-key kits. Models: CI-BLX8, CI-HLX12. 8 or 12 pieces; ball/flat ends; extended handles. Options are 8-piece ball-end or 12-piece flat-end sets. The 8-piece set contains 0.05, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32 inch, 8 sizes. The 12-piece set contains 0.05, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16 inch, 12 sizes. Imported US Protanium special chromium-vanadium steel is polished/blackened for hardness/wear resistance. Marked plastic holders aid storage/access. Ball-driver organizer/kit for optical tables. Models: CI-BDR-KIT, CI-BDR. Easy organization; organizer alone or with tools; table/breadboard mounting. CI-BDR-KIT includes six ball-end drivers, six hex keys, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, and one CI-BDR rack. Polished/blackened Protanium drivers and S2 keys with the source-described fine satin-nickel finish provide wear/corrosion resistance and high torque. Hole-size markings guide storage. Ball-end hex-driver kit with case. Model: CI-BD-KIT. Plastic tool case; US Protanium; quality plastic-rubber handles. Six drivers, 1.5, 2, 2.5, 3, 4, 5 mm, come with a custom-lined case. Polished/blackened Protanium provides wear/corrosion resistance and torque. Comfortable nonslip plastic-rubber handles and a six-tool fitted case/outer box facilitate storage/use. Thumb-operated hex keys. Models: CI-HKT-KIT, CI-HKT1.5-P4, CI-HKT2-P4, CI-HKT2.5-P4, CI-HKT3-P4, CI-HKT5-P4. For socket adjusters/screws; sizes 1.5, 2, 2.5, 3, 4, 5 mm; black-anodized knurled knobs with size marks; replaceable S2 hex tips; packs of four. These keys adjust sockets such as MMM-05 mounts and can remain inserted for convenience. Polished, hardened, red-finished S2 tips provide wear/corrosion resistance and high torque. Black-anodized aluminum knobs hold tips with set screws; reverse worn tips for further use. The source names HWS-KIT with one each of 1.5 mm, 2 mm, 2.5 mm, 3 mm, 5 mm, five total; other models contain four of one size. Color-coded screwdriver kit. Model: CI-SK1. Six types; chromium-molybdenum-vanadium tips as listed; antiroll handles. The body text specifies chromium-vanadium steel, with blackened/hardened tips. It includes 3 Phillips drivers, #1, #0, #00, and 3 slotted drivers, 1.4mm, 1.8mm, 2.4mm, for daily use. Rotating ends ease handling. Precision drivers with aluminum handle. Model: CI-SD9608. 28 precision bits; aluminum handle with built-in extension. The set includes 28 chromium-vanadium bits: slotted, Phillips, hex, triangular, and star types for electronics repair. A rotating tail cap aids precise screw positioning; an internal extension reaches confined spaces. CI-BD-KIT brand: BONDHUS, USA, from this model's original details. Common page information covers the group's combined uses/types, not all types for each model: applications—socket-head, slotted, and Phillips screws; types—hex keys/screwdrivers/drivers.