40-CH 100G Thermal AWG
Flyin Optronics offers a full range of Thermal/Athermal AWG products, including 50GHz, 100GHz and 200GHz Thermal/Athermal AWG.Here we present the generic specification for the 40-channel 100GHz Flat Top Thermal AWG (40 channel TAWG) MUX/DEMUX component supplied for use in DWDM system. Flyin’s 40 channel 100G Thermal AWG(100G TAWG) is designed for use within the C -band release of DWDM system. To decrease the power dissipation of the devices in different environmental conditions, the TAWG package is special designed with selection of reliable thermal plastic with low thermal conduction, and the TAWG operating temperature is controlled by using foil resist heater or Peltier TEC with thermistor temperature sensor. Different input and output fibers, such as SM fibers, MM fibers and PM fiber can be selected to meet different applications. We can also offer different product packages, including special metal box and 19” 1U rackmount. The planar DWDM components(Thermal/Athermal AWG) from Flyin Optronics are fully qualified according to Telcordia reliability assurance requirements for fiber optic and opto-electronic components (GR-1221-CORE/UNC, Generic Reliability Assurance Requirements for Fiber Optic Branching Components, and Telcordia TR-NWT-000468, Reliability Assurance Practices for Opto-electronic Devices). 1、IL Represents the worst case over a +/-0.01nm window around the ITU wavelength; 2、PDL was measured on average polarization over a +/- 0.01nm window around the ITU wavelength.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Number of Channels | 40 |
| Number Channel Spacing | 100 GHz |
| Cha. Center Wavelength | C-Band |
| Clear Channel Passband | ±0.1 nm |
| Wavelength Stability | ±0.005 nm |
| -1 dB Channel Bandwidth | 0.4 nm |
| -3 dB Channel Bandwidth | 0.6 nm |
| Optical Insertion Loss at ITU grid [1、IL Represents the worst case over a +/-0.01nm window around the ITU wavelength] | typical:4.5 dB; max:6.0 dB |
| Isolation-Adjacent | 25 dB |
| Isolation-Non-Adjacent | 30 dB |
| Isolation-Total Channel Isolation | 22 dB |
| Insertion Loss Uniformity | typical:1.0 dB; max:1.5 dB |
| Directivity (Mux Only) | 40 dB |
| Insertion Loss Ripple | 0.5 dB |
| Optical Return loss | 40 dB |
| PDL/Polarization Dependent Loss in Clear Channel Band [2、PDL was measured on average polarization over a +/- 0.01nm window around the ITU wavelength.] | typical:0.3 dB; max:0.5 dB |
| Polarization Mode Dispersion | 0.5 ps |
| Maximum Optical Power | 23 mW |
| MUX/DEMUX input/ output Monitoring range | min:-35 dB/℃; max:+23 dB/℃ |
| Operating Temperature | min:-5 ℃; typical:+25 ℃; max:+65 ℃ |
| Operating Humidity | min:5 %RH; max:95 %RH |
| Storage Temperature | min:-40 ℃; max:+85 ℃ |
| Storage Humidity | min:5 %RH; max:95 %RH |
| Package Size | L150×W65×H16 |
| Size between screws | 140 mm × 58 mm |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
1x3 Raman WDM
Wavelength-Division Multiplexing (WDM)
Oe-photonics
Wavelength Range: 1450/1550/1660 Insertion Loss: ≤1.4 dB Polarization Dependent Loss: ≤0.2 dB
OE Photonics' Raman WDM uses dielectric thin-film filtering to increase capacity by transmitting multiple channels at distinct wavelengths over 1260nm-1620nm on one fiber. A receiver-side demultiplexer separates wavelengths for different equipment. The range meets ITU-I G.695 and is widely used in fiber-sensing systems.
-
CWDM device package
Wavelength-Division Multiplexing (WDM)
Oe-photonics
Wavelength: 1260~1620 nm Channel Spacing: 20 nm Channel bandwidth: λc±6.0~λc±7.5
OE Photonics' CWDM uses dielectric thin-film filtering to increase capacity by transmitting multiple channels at distinct wavelengths over 1270nm-1610nm on one fiber. A receiver-side demultiplexer separates wavelengths for different equipment. The range meets ITU-I G.695. Applications include CATV, metro networks, and single-fiber bidirectional systems.
-
CWDM module package
Wavelength-Division Multiplexing (WDM)
Oe-photonics
Operating Wavelength: 1260~1650 nm Channel Spacing: 20 nm Channel bandwidth: λc±6.0~λc±7.5
OE Photonics' CWDM is a low-cost WDM technology for metro access networks. A transmitter-side optical multiplexer combines channels at distinct wavelengths over 1270nm-1610nm on one fiber to increase capacity. A receiver-side demultiplexer separates wavelengths for different equipment. Operating wavelengths meet ITU-T requirements, with good optical performance and reliability. Applications include CATV, metro networks, and single-fiber bidirectional systems.
-
DWDM device package
Wavelength-Division Multiplexing (WDM)
Oe-photonics
Operating Wavelength: 1527.21~1563.04 nm Channel Spacing [Original table left column]: 100 Ghz Channel Spacing [Original table right column]: 200 Ghz
OE Photonics' DWDM is a low-cost WDM technology for metro access networks. A transmitter-side optical multiplexer combines channels at distinct wavelengths over 1527.21nm~1563.04nm on one fiber to increase capacity. A receiver-side demultiplexer separates wavelengths for different equipment. Operating wavelengths meet ITU-T requirements, with good optical performance and reliability. Applications include CATV, metro networks, and single-fiber bidirectional systems.
-
DWDM module package
Wavelength-Division Multiplexing (WDM)
Oe-photonics
Operating Wavelength: 1527.21~1563.04 nm Channel Spacing [Original table λ-count 2/4/8 column]: 100 Ghz Channel Spacing [Original table λ-count 16/32 column]: 200 Ghz
OE Photonics' DWDM is a low-cost WDM technology for metro access networks. A transmitter-side optical multiplexer combines channels at distinct wavelengths over 1527.21nm~1563.04nm on one fiber to increase capacity. A receiver-side demultiplexer separates wavelengths for different equipment. Operating wavelengths meet ITU-T requirements, with good optical performance and reliability. Applications include CATV, metro networks, and single-fiber bidirectional systems.
Related Articles
Founded in 2019, Jilin JC Ultrafast Equipment Co., Ltd. is a high-tech enterprise incubated by the Ultrafast Optoelectronics Center of Jilin University. Our R&D team owns 15 years of profound experience in femtosecond laser micro-nano fabrication.
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
As a professional ultraviolet‑laser solution provider, Precilasers has launched its 266 nm narrow‑linewidth industrial laser, delivering reliable single‑frequency output for high‑precision interference lithography, semiconductor inspection and precision metrology applications.
Precise spectral screening is essential for high-precision medical detection, spectroscopic analysis and intelligent imaging systems. Tailored for visible and near-infrared spectral separation, the SP900 shortpass optical filter delivers high-efficiency light transmission and deep infrared blocking performance. It effectively eliminates stray light interference, improves signal-to-noise ratio (SNR), and serves as a core optical component for biomedical instruments, scientific analysis equipment and machine vision systems.
Loading...
Name
Phone
Organization
Use Case
Database Platform