25 mm Travel Linear Translation Stage DML90-25CZH

JCOPTIX 25 mm linear stages use precision crossed rollers and Japanese Mitutoyo micrometers for high loads/positioning accuracy. Ground mating surfaces fit guides precisely. Single-axis straightness is 3 μm and parallelism 8 μm; dowels/precision vertical plates provide XY orthogonality 10 μm and Z perpendicularity 20 μm, with factory reports for all products. Guides support 42 Kg horizontally and 4 Kg vertically. Micrometers move 0.5 mm/turn with 10 μm minimum reading. The 25 mm stage tops measure 90 mm × 90 mm, with twenty-nine M6 holes at 12.5/25 mm pitch and four M4 holes. Four base M6 countersinks attach to tables, breadboards, or supports through M6 screws. Center/left/right drives are offered as X/Z single axes and XY/XZ/YZ/XYZ combinations. Standard single axes and DML90-25-AP adapters build Z or XYZ configurations. Supplied Ø5 dowels/M6 screws ensure alignment/perpendicularity. Preassembled horizontal-lifting sets and separate right-angle plates are also available. Single-axis stages with imported standard micrometers. Models: DML90-25CX, DML90-25LX, DML90-25RX, DML90-25LZ. Center/left/right drives; X/Z configurations; travel 25 mm; top 90 mm × 90 mm. Precision crossed rollers/Mitutoyo heads provide 23.2 mm thickness, 25 mm travel, 42 kg horizontal load, 3 μm straightness, 8 μm parallelism, and 10 μm minimum reading. Tops 90 mm × 90 mm have M6/M4 threads. Bases have 4 M6 countersinks. Three drive positions and X/Z versions are available, each with 4 M6 screws and 2 Ø5 dowels. Two-axis stages with imported standard micrometers. Models: DML90-25CXY, DML90-25LXY, DML90-25CXZ, DML90-25LXZ. Center/left drives; XY/XZ; travel 25 mm; top 90 mm × 90 mm. XY/XZ versions include 4 M6 screws. Individual stages are 23.2 mm thick, with 25 mm travel, 42 kg horizontal/4 kg vertical load, 3 μm straightness, 8 μm parallelism, and 10 μm reading. Tops 90 mm × 90 mm have M6/M4 threads; bases have 4 M6 countersinks for tables/breadboards. Three-axis stages with imported standard micrometers. Models: DML90-25CXYZ, DML90-25LXYZ. Center/left drives; XYZ; travel 25 mm; top 90 mm × 90 mm. XYZ versions include 4 M6 screws. Individual stages are 23.2 mm thick, with 25 mm travel, 42 kg horizontal/4 kg vertical load, 3 μm straightness, 8 μm parallelism, and 10 μm reading. Tops 90 mm × 90 mm have M6/M4 threads; bases have 4 M6 countersinks. Vertical adapter assembly. Model: DML90-25-AP. Top 90 mm × 90 mm; right-angle bracket/adapter plate; vertical-axis combinations including Z stages; M6/M4 threads. The bracket has 8 vertical and 4 horizontal M6 countersinks; the 90 mm × 90 mm adapter plate has 21 M6 and 4 M4 holes. Each set includes 8 M6 screws and 4 Ø5 dowels for vertical alignment/fixation. First place 2 Ø5 dowels on the stage top and choose 4 suitable vertical M6 countersinks, then secure with M6 screws. For single Z such as DML90-25LZ, the stage's lower edge must sit above the bracket's horizontal face to allow downward travel; its middle 4 M6 countersinks provide this. Place 2 Ø5 dowels under the stage and secure the adapter plate through 4 bottom M6 countersinks. The plate becomes the new Z mounting surface. Stages with horizontal-lift right-angle plates. Models: DML90-25CZH, DML90-25LXZH, DML90-25LXYZH. Compact inward plates for horizontal lifting; center single Z or left two/three axes; travel 25 mm; imported micrometers; top 90 mm × 90 mm. Inward adapters are more compact than standard sets and horizontally support optics/optomechanics. Center Z, left XZ, or left XYZ are offered. Tops 90 mm × 90 mm have 29 M6 holes at 12.5 mm/25 mm pitch. Four mounting positions are provided as 4 M6 countersinks on brackets/fixed plates. DML90-25CZH requires the supplied ultrashort 5 mm HEX key in confined space. Separate horizontal-lift plate. Model: DML90-25-APH. Top 90 mm × 90 mm; converts vertical Z faces to horizontal lifting; M6 threads. The vertical face has 4 M6 threads and 2 Ø5 dowel holes. Supplied 4 M6 cap screws and 2 Ø5 dowels attach it to Z stages; remove the existing flat adapter first. Examples: DML90-25CZ, DML90-25LXZ, DML90-25CXYZ. Install the horizontal face upward/downward as required. The 90 mm × 90 mm top has 29 M6 holes at 12.5 mm/25 mm pitch. Actuator holders, Ø9.525 mm (Ø3/8 inch) bore. Models: DML90-25CD9.5, DML90-25LD9.5. Replace 25 mm-travel stage actuator holders; fit Ø9.525 mm (Ø3/8 inch) electric actuators. Internal screws and press-fit pins easily replace center/side holders on 25 mm stages for Ø9.525 mm (Ø3/8 inch) actuator shafts.

Save to Favorites