Femtosecond Fiber Laser 930 nmFemtosecondLaserfor2PM
JCOPTIX femtosecond lasers are easy to operate, with 780 nm, 930 nm, or 1030 nm outputs of ≥120 mW, >1.2 W, or >1.5 W, respectively. All-PM fiber construction provides stability and beam quality with collimated free-space output for nonlinear spectroscopy, multiphoton microscopy, and terahertz imaging. Warning: read and follow the manual, observe safety practices, and wear protection to prevent injury or damage. Femtosecond fiber lasers: applicable models 780 nmFemtosecondLaserfor2PM, 930 nmFemtosecondLaserfor2PM, and 1030 nmFemtosecondLaserfor2PM; centers 780 nm, 930 nm, and 1030 nm; powers ≥120 mW, >1.2 W, and >1.5 W; pulse widths <120 fs, <150 fs, and <150 fs; M²<1.2. JCOPTIX two-photon sources use all-PM fiber for stable high-power pulses at 780 nm, 930 nm, and 1030 nm, suiting multiphoton imaging and GFP excitation. Micro-optics with integrated control box and laser head make them compact and convenient. Output is free-space linear polarization at 80 ±2 MHz, with M²<1.2 and air cooling.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Repetition Rate | 80 ± 2 MHz |
| Pulse Width | < 150 fs |
| Average Power/Optical Power | >1.2 W |
| Spot Size | 1.2 ± 0.2 mm |
| Beam Quality M² | < 1.2 |
| Divergence angle | 0.6 ± 0.2 mrad |
| Ellipticity | >0.8 |
| Degree of polarization [Linearly Polarized; 100:1 and >20dB Are Two Original Source Representations, Both Retained] | Linear Polarization 100:1 (>20 dB) |
| Output Method | Free Space |
| Power Stability (RMS) [Temperature 25±1℃; 7×24h] | < 1% @ 25 ± 1℃ @ 7 × 24h |
| Power Supply [See Original Values for Voltage/Adapter Power or AC Frequency, Respectively] | 100/240 VAC (50/60 Hz) |
| Control Method | RS-232 |
| Rising Edge/Falling Edge | < 200 ns |
| Power Control [Adjustment Range 0-100%; Output Powers After Built-In AOM Listed Separately in Original Value] | 0-100%, 1.0 W After Built-In AOM |
| Dispersion Precompensation (GDD) [Original Range/Alternative Ranges Retained Without Reversing Negative Limits or Merging Ranges] | -3000 - -60000 fs²/-50000 - +6000 fs² |
| Laser Head Dimensions/Laser Dimensions | 365 mm × 220 mm × 103 mm |
| Laser Head Weight/Laser Weight | 8.9 kg |
| Electrical control box dimensions | 416 × 483 × 133.5 mm, 19"/3U Standard Size |
| Electrical control box weight | 17.1 kg |
| Operating Temperature | 19-27℃ |
| Cooling Method | Air Cooling |
| Operating Humidity [Noncondensing] | 20%-65% (Noncondensing) |
| Altitude | 0-2000 m |
| Center Wavelength/Tuning Range | 930 ± 10 nm |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
DTS pulsed laser
Laser Modules & Systems
Oe-photonics
Operating Wavelength: typical:1550 nm Peak output optical power: typical:30 W Pulse Width: min:5 ns; typical:10 ns
The DTS pulsed laser integrates a nanosecond seed laser and fiber power amplifier for distributed fiber temperature sensing, laser ranging, and fiber sensing. Optimized nanosecond drive circuitry and a low-noise erbium-doped amplifier produce stable pulses with high peak power and low distortion. External triggering and serial configuration of width, peak power, and other parameters provide high integration, compact size, and easy setup. Rigorous environmental testing supports long-term reliability and stability.
-
Ultra-narrow-linewidth fiber laser (single-mode/polarization-maintaining) Laser Modules & Systems Oe-photonics
Operating Wavelength Range: typical:1550.12 nm Output Optical Power: typical:10 dBm Equivalent spectral linewidth: typical:3 kHz
The UNL fiber-laser series for sensing offers narrow linewidth, long coherence length, low noise, and strong environmental-interference resistance. Distinctive optics and precise drive/control eliminate external temperature and vibration effects on wavelength for stable single-longitudinal-mode, ultra-narrow-linewidth, single-frequency output. Serial configuration, high integration, compact size, and easy setup are provided, with custom single-mode or PM-fiber outputs.
-
Industrial laser welding wire feeder Laser Modules & Systems Qilinlaser
-
Industrial laser wire-feed assembly-SST30 Laser Modules & Systems Qilinlaser
-
Energy Storage Industrial Welding Head Laser Modules & Systems Qilinlaser
Interface Type (Interface): QBH/RD Clear Aperture (Optical Aperture): 20 mm Power Handling (Power): 4000 W
QBH/RD compatibility with different fiber lasers; drawer optics for easy replacement, rated for 4000W; modular quick assembly with optimized optics, water cooling, and double sealing for durability and stability; ring, filled, and rectangular wobble patterns for multifunction welding; efficient, time-saving energy-storage welding with a youthful design, lower labor costs, strong interference resistance, safety, and stability; industrial uses including new-energy, battery, and condenser-tube welding.
Related Articles
The LZFL405‑80mW‑3 series from Shenzhen Leirte Optoelectronics Co., Ltd. is a coaxial‑packaged violet‑blue single‑mode fiber‑coupled laser diode. It delivers 80 mW continuous‑wave output at 405 nm. Light is coupled into 3 μm core‑diameter single‑mode fiber for clean beam quality and easy integration into diverse optical systems. It serves as a compact violet‑blue light source for medical instruments and industrial printing applications.
Wuhan Optics Valley Quantum Technology Co., Ltd. is a leading domestic developer of high‑speed semiconductor optical chips and photodetector components. Our product portfolio covers InGaAs avalanche photodiode bare dies and PIN photodetector chips designed for fiber‑optic communication
As a professional ultraviolet‑laser solution provider, Precilasers has launched its 266 nm narrow‑linewidth industrial laser, delivering reliable single‑frequency output for high‑precision interference lithography, semiconductor inspection and precision metrology applications.
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
Loading...
Name
Phone
Organization
Use Case
Database Platform