Single-Mode Fiber Patch Cable FCS2-PC/SMA-980-1200
JCOPTIX single-mode non-PM patch cords offer various connectors over 320-1650 nm: FC/PC, FC/APC, FC/PC-to-SMA, or FC/PC-to-FC/APC. Standard cords have Ø3.0 mm protective tubing and dust caps at both ends against contamination/damage. Multiple cord types and related products are available; contact support for custom needs. Single-mode patch cords, FC/PC. Models: FCS1-PC-320-430, FCS1-PC-450-600, FCS1-PC-600-770, FCS1-PC-780-970, FCS1-PC-980-1200, FCS1-PC-1300-1600, FCS2-PC-450-600, FCS2-PC-600-770, FCS2-PC-780-970, FCS2-PC-980-1200, FCS2-PC-1300-1600 FC/PC-FC/PC. FC/PC-FC/PC with black boots; 320-1600 nm; lengths 1 m or 2 m. JCOPTIX FC/PC-FC/PC cords have black boots and Ø3 mm loose tubes, black below 980 nm and yellow above 980 nm. Standard wavelengths span 320-1600 nm with 1 m/2 m lengths. Contact support for bare fiber or customization. Single-mode patch cords, FC/APC. Models: FCS1-APC-320-430, FCS1-APC-450-600, FCS1-APC-600-770, FCS1-APC-780-970, FCS1-APC-980-1200, FCS1-APC-1300-1600, FCS2-APC-450-600, FCS2-APC-600-770, FCS2-APC-780-970, FCS2-APC-980-1200, FCS2-APC-1300-1600 FC/APC-FC/APC. FC/APC-FC/APC with green boots; 320-1600 nm; lengths 1 m/2 m. The body text describes FC/APC-FC/APC cords with black boots and Ø3 mm loose tubing for stable waterproof/moisture-resistant protection. Tubes are black below 980 nm and yellow above 980 nm. Standard wavelengths span 320-1600 nm and lengths 1 m/2 m; contact support for bare fiber/custom lengths. Single-mode FC/APC patch cords, jacket diameter 0.9 mm. Models: FBS2-APC-400-550, FBS2-APC-450-600, FBS2-APC-600-770, FBS2-APC-780-970, FBS2-APC-980-1600, FBS2-APC-1260-1650, FBS4-APC-400-550, FBS4-APC-450-600, FBS4-APC-600-770, FBS4-APC-780-970, FBS4-APC-980-1600, FBS4-APC-1260-1650 FC/APC-FC/APC. FC/APC-FC/APC with green boots; 400-1650 nm; lengths 2 m/4 m. The body describes FC/APC-FC/APC cords with black boots and Ø0.9 mm protective tubing, stable, waterproof, and moisture-resistant. Tubes are black below 980 nm, blue for 1060-XP, and yellow for SMF-28e. Standard wavelengths span 400-1650 nm and lengths 2 m/4 m. Contact support for bare fiber or custom lengths. Single-mode patch cords, FC/PC-to-SMA. Models: FCS1-PC/SMA-320-430, FCS1-PC/SMA-450-600, FCS1-PC/SMA-600-770, FCS1-PC/SMA-780-970, FCS1-PC/SMA-980-1200, FCS1-PC/SMA-1300-1600, FCS2-PC/SMA-450-600, FCS2-PC/SMA-600-770, FCS2-PC/SMA-780-970, FCS2-PC/SMA-980-1200, FCS2-PC/SMA-1300-1600 FC/PC-SMA. FC/PC-SMA; 320-1600 nm; blue loose tubing. JCOPTIX FC/PC-SMA cords cover 320-1600 nm, with lengths 1 m/2 m, black connector boots, and Ø3 mm blue loose tubes for stable waterproof/moisture-resistant protection. Contact support for bare fiber/custom lengths. Single-mode patch cords, FC/PC at one end and FC/APC at the other. Models: FCS2-PC/APC-320-430, FCS2-PC/APC-400-550, FCS2-PC/APC-450-600, FCS2-PC/APC-600-770, FCS2-PC/APC-780-970, FCS2-PC/APC-980-1200, FCS2-PC/APC-1300-1600 FC/PC-FC/APC. FC/PC-FC/APC; 320-1600 nm; Ø3.0 mm loose tubing. JCOPTIX hybrid cords have black boots and Ø3.0 mm loose tubes, black below 980 nm and yellow above 980 nm. Standard wavelengths span 320-1600 nm. Contact support for bare fiber or other custom requirements.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Bare fiber brand/model | Nufern/1060-XP |
| Fiber Length | 2.0 m |
| Fiber length tolerance | +0.075/-0 m |
| Cladding Diameter | 125.0 ± 1.0 μm |
| Core Diameter | 8.5 μm |
| Coating Diameter | 245 ± 15 µm |
| Wavelength Range | 980-1200 nm |
| Numerical Aperture | 0.14 |
| Mode Field Diameter [The test wavelengths following each @ correspond to the respective original values; see the original values for details] | 5300-6400 nm @ 980 nm |
| Insertion Loss [Test Wavelengths Following Each @ Correspond to Original Values, Respectively; Connector to Connector] | 1.0 dB (Connector to Connector) @980 nm; 0.7 dB (Connector to Connector) @1064 nm |
| Cutoff Wavelength | 920 ± 50 nm |
| Return Loss [See the original values for the typical and minimum values, respectively] | 50 dB (Typical); 40 dB (Minimum) |
| Maximum Attenuation [See the original values for the respective test wavelengths] | ≤ 2.0 dB/km @ 980 nm |
| Loose tube color | Blue |
| Loose tube diameter | Ø3.0 mm |
| Connector Type | FC/PC to SMA |
| Operating Temperature | -20 - +70 ℃ |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
AFC110APC-1064 Optical Fibers U-optic
Alignment Wavelength: 1064 nm Beam Waist Diameter: 1.38 mm Focal Length: 6.31 mm
-
AFC110APC-1550 Optical Fibers U-optic
Alignment Wavelength: 1550 nm Beam Waist Diameter: 1.21 mm Focal Length: 6.37 mm
-
N3D fiber laser marking kit Optical Fibers Central-laser
Clear Aperture Dimension [Model=P10]: 10 mm Input Beam Spot [Model=P10]: 7 mm XY-Axis Speed [Model=P10]: ≤5000 mm/s
N3D fiber-laser marking kit. Models P10, P10 (water-cooled), P10N, and P14 have clear apertures of 10mm, 10mm, 10mm, and 14mm, respectively.
-
Fiber MM3D pre-focusing laser marking kit Optical Fibers Central-laser
Clear Aperture Dimension [Model=PR10]: 10 mm Input Beam Spot [Model=PR10]: 7 mm XY-Axis Speed [Model=PR10]: ≤5000 mm/s
Fiber MM3D pre-focus laser-marking kit. Models PR10, PR20, and PR30 have clear apertures of 10mm, 20mm, and 30mm, respectively.
-
Fiber MM3D post-focusing laser marking kit Optical Fibers Central-laser
Clear Aperture Dimension [Model=P10]: 10 mm Input Beam Spot [Model=P10]: 7 mm XY-Axis Speed [Model=P10]: ≤5000 mm/s
Fiber MM3D post-focus laser-marking kit. Models P10, P10 (water-cooled), P10N, P14, P14 (water-cooled), and P20 have clear apertures of 10mm, 10mm, 10mm, 14mm, 14mm, and 20mm, respectively.
Related Articles
Fomoptic delivers integrated one‑stop optical solutions covering precision optical fabrication and custom vacuum coating services. Supported by complete processing production lines, comprehensive metrology equipment and experienced engineering team, we provide full‑chain customized components, ranging from blank shaping, ultra‑precision polishing to thin‑film coating, for laser systems, infrared imaging, industrial optics and scientific‑research projects.
A solid-state laser is one of the most common and reliable laser types used in modern industry, medical equipment, and scientific research. Unlike gas or fiber lasers, it uses solid materials as its gain medium to generate stable, high-brightness laser beams. Thanks to its high precision, long lifespan, and compact structure, solid-state lasers have become a mainstream solution for high-precision laser processing and optical systems.
In photonics and laser technology, devices that manipulate optical signals via the electro-optic effect form the backbone of precision optical systems. Electro-optic phase modulators and electro-optic deflectors are two prominent examples of this device category. As a critical hardware solution for high-speed, high-accuracy laser beam direction control, electro-optic deflectors are widely deployed across industrial and research settings. Below is a detailed overview of their core structure, key performance drivers, and primary use cases.
In UV laser testing, UV spectroscopy and lithography optical experiments, excessive light intensity will lead to detector saturation, optical component damage and overexposed imaging.
Loading...
Name
Phone
Organization
Use Case
Database Platform