25 mm Post with Base MBP1-12.5B
JCOPTIX 25 mm pedestal posts use one-piece solid nonmagnetic stainless steel with fine sandblasting for excellent strength and rigidity. Two types have top M4 or M6 holes. Available heights range from 25 mm to 300 mm. Spacers under 10 mm high can be stacked on 25 mm pedestal posts to increase height. Bases are compatible with stainless-steel fork clamps for flexible table mounting. Bottom M6 holes permit direct installation at corresponding M6 table/breadboard holes. Tops have 2 Ø2 mm locating-pin holes for precision positioning. A side Ø6 mm through-hole accepts a 5 mm hex key for additional torque. 25 mm pedestal posts, top M4 hole, supplied M4×12 setscrew. Models: MBP1-12.5B, MBP1-19B, MBP1-25B, MBP1-38B, MBP1-50B, MBP1-75B, MBP1-100B, MBP1-200B, MBP1-300B. Solid 303 stainless steel. Top M4 and bottom M6 holes. Ø6 mm through-hole. Pedestal base compatible with fork clamps. 1 supplied M4×12 hex-socket setscrew. 25 mm pedestal posts, top M6 hole, supplied M6×16 setscrew. Models: MBP1-12.5A, MBP1-25A, MBP1-38A, MBP1-50A, MBP1-75A, MBP1-100A, MBP1-200A, MBP1-300A. Solid 303 stainless steel. Top M6 and bottom M6 holes. Ø6 mm through-hole. Pedestal base compatible with fork clamps. 1 supplied M6×16 hex-socket setscrew.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Body Material | 303 Stainless Steel |
| Surface Treatment | Fine sandblasting |
| Base Outer Diameter | Ø32 mm |
| Included Screw Specifications | M4 × 12 Hex Socket Cup-Point Set Screw |
| Top Dowel Pin Hole Specifications/Quantity | Ø2 (0-0.015) / 2 Pieces |
| Length Tolerance | ± 0.05 mm |
| Parallelism | < 20 μm |
| Perpendicularity | < 20 μm |
| Length | 12.5 mm |
| Outer Diameter | 25 mm |
| Top Tapped Hole Specifications | M4 |
| Bottom threaded hole specification | M4 |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
aj13(b3) Mounting Bases Jyxjgd
-
aj13(b4)+al13-9 Mounting Bases Jyxjgd
-
Platform Clamping Block MBB-RR Mounting Bases Jcoptix
Quantity: 1 Countersunk hole specification: M6 Maximum Clampable Part Thickness: 6.4 mm
JCOPTIX table clamps secure optomechanics where suitable mounting holes are absent. Adjustable placement reaches available holes and reduces assembly time. Rigid one-piece construction and slots improve mounting flexibility; different structures suit different component thicknesses/shapes. General-purpose table clamps. Models: MBB-TC5-P6, MBB-TC5. Maximum thickness: 12.7 mm. Fit most common optomechanics. Size: 50.8 mm × 19 mm × 17.3 mm. M6 slot length: 29.0 mm. JCOPTIX general clamps suit MBB-05S, MBB-05D, MBB-05L, and other common components. Size is 50.8 mm × 19 mm × 17.3 mm. M6 slots and M6 cap screws secure components up to 12.7 mm thick in any direction on tables/breadboards. Height-adjustable clamps. Models: MBB-TC3-P6, MBB-TC3. Screw-adjustable component thickness. Fit most common optomechanics. Size: 50.8 mm × 12.7 mm × 9.4 mm. M6 slot length: 29 mm. JCOPTIX clamps suit MBB-05S, MBB-05D, MBB-05L, breadboards, and similar items. Size: 50.8 mm × 12.7 mm × 9.4 mm. M6 slots/M6 cap screws allow any mounting direction. Component thickness depends on installed screw length. Included: one M6 × 30 cap screw, one M6 × 20 cap screw, and matching M6 nut. The nut only prevents screw loss and can be removed if inconvenient. Sold individually or in packs of six. Clamps for 19 mm dovetail rails. Models: MBB-RR-P6, MBB-RR. Maximum thickness: 6.4 mm. Wedge head for rails. M6 slots. JCOPTIX wedge-headed clamps specifically secure dovetail rails using M6 slots and M6 cap screws in any table/breadboard direction. They also clamp components thinner than 6.4 mm.
-
Base Position Stop MBA-FP Mounting Bases Jcoptix
Material: 6061-T6 Surface Treatment: Black Anodized Compatible Screw Specifications: M6
JCOPTIX base locators mark post-base or square-base positions for realignment after removal. A rotating version turns through 200° for flexible placement. Base locators: applicable models MBA-FP-P6, MBA-FP, and MBA-FPS; two-point location of Ø25 mm and Ø38 mm posts; three-point square-base location; slotted fastening. Three marked contact points locate square parts; two outer-arm points locate posts. Screws or clamps secure the locator, including when direct attachment to table threads is unavailable. MBA-FP-P6 is sold in groups of 6. Adjusting the MBA-FPS tension screw allows 200° head rotation for varied square-component positions and angles. Square corner radii must be below R1.5. Bases with radii above R1.5 but below R10 require two locators.
-
Base Position Stop MBA-FPS Mounting Bases Jcoptix
Material: 6061-T6 Surface Treatment: Black Anodized Compatible Screw Specifications: M6
JCOPTIX base locators mark post-base or square-base positions for realignment after removal. A rotating version turns through 200° for flexible placement. Base locators: applicable models MBA-FP-P6, MBA-FP, and MBA-FPS; two-point location of Ø25 mm and Ø38 mm posts; three-point square-base location; slotted fastening. Three marked contact points locate square parts; two outer-arm points locate posts. Screws or clamps secure the locator, including when direct attachment to table threads is unavailable. MBA-FP-P6 is sold in groups of 6. Adjusting the MBA-FPS tension screw allows 200° head rotation for varied square-component positions and angles. Square corner radii must be below R1.5. Bases with radii above R1.5 but below R10 require two locators.
Related Articles
The LZFL405‑80mW‑3 series from Shenzhen Leirte Optoelectronics Co., Ltd. is a coaxial‑packaged violet‑blue single‑mode fiber‑coupled laser diode. It delivers 80 mW continuous‑wave output at 405 nm. Light is coupled into 3 μm core‑diameter single‑mode fiber for clean beam quality and easy integration into diverse optical systems. It serves as a compact violet‑blue light source for medical instruments and industrial printing applications.
Macro channel water-cooled stacked laser diodes integrate dozens of laser bars into one vertical stacked module with large-diameter macro flow cooling channels.
CytoViva delivers comprehensive hyperspectral imaging solutions covering visible to near-infrared spectrum, compatible with brightfield, fluorescence and proprietary enhanced darkfield microscopy modes.
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
Loading...
Name
Phone
Organization
Use Case
Database Platform