16 mm Flexure Coaxial Mounting Plate MCOR-S6.5A

Quantity: 1 Countersunk hole specification: M6 Maximum Clampable Part Thickness: 6.4 mm

JCOPTIX table clamps secure optomechanics where suitable mounting holes are absent. Adjustable placement reaches available holes and reduces assembly time. Rigid one-piece construction and slots improve mounting flexibility; different structures suit different component thicknesses/shapes. General-purpose table clamps. Models: MBB-TC5-P6, MBB-TC5. Maximum thickness: 12.7 mm. Fit most common optomechanics. Size: 50.8 mm × 19 mm × 17.3 mm. M6 slot length: 29.0 mm. JCOPTIX general clamps suit MBB-05S, MBB-05D, MBB-05L, and other common components. Size is 50.8 mm × 19 mm × 17.3 mm. M6 slots and M6 cap screws secure components up to 12.7 mm thick in any direction on tables/breadboards. Height-adjustable clamps. Models: MBB-TC3-P6, MBB-TC3. Screw-adjustable component thickness. Fit most common optomechanics. Size: 50.8 mm × 12.7 mm × 9.4 mm. M6 slot length: 29 mm. JCOPTIX clamps suit MBB-05S, MBB-05D, MBB-05L, breadboards, and similar items. Size: 50.8 mm × 12.7 mm × 9.4 mm. M6 slots/M6 cap screws allow any mounting direction. Component thickness depends on installed screw length. Included: one M6 × 30 cap screw, one M6 × 20 cap screw, and matching M6 nut. The nut only prevents screw loss and can be removed if inconvenient. Sold individually or in packs of six. Clamps for 19 mm dovetail rails. Models: MBB-RR-P6, MBB-RR. Maximum thickness: 6.4 mm. Wedge head for rails. M6 slots. JCOPTIX wedge-headed clamps specifically secure dovetail rails using M6 slots and M6 cap screws in any table/breadboard direction. They also clamp components thinner than 6.4 mm.

Material: 6061-T6 Surface Treatment: Black Anodized Compatible Screw Specifications: M6

JCOPTIX base locators mark post-base or square-base positions for realignment after removal. A rotating version turns through 200° for flexible placement. Base locators: applicable models MBA-FP-P6, MBA-FP, and MBA-FPS; two-point location of Ø25 mm and Ø38 mm posts; three-point square-base location; slotted fastening. Three marked contact points locate square parts; two outer-arm points locate posts. Screws or clamps secure the locator, including when direct attachment to table threads is unavailable. MBA-FP-P6 is sold in groups of 6. Adjusting the MBA-FPS tension screw allows 200° head rotation for varied square-component positions and angles. Square corner radii must be below R1.5. Bases with radii above R1.5 but below R10 require two locators.

Material: 6061-T6 Surface Treatment: Black Anodized Compatible Screw Specifications: M6

JCOPTIX base locators mark post-base or square-base positions for realignment after removal. A rotating version turns through 200° for flexible placement. Base locators: applicable models MBA-FP-P6, MBA-FP, and MBA-FPS; two-point location of Ø25 mm and Ø38 mm posts; three-point square-base location; slotted fastening. Three marked contact points locate square parts; two outer-arm points locate posts. Screws or clamps secure the locator, including when direct attachment to table threads is unavailable. MBA-FP-P6 is sold in groups of 6. Adjusting the MBA-FPS tension screw allows 200° head rotation for varied square-component positions and angles. Square corner radii must be below R1.5. Bases with radii above R1.5 but below R10 require two locators.