16 mm Coaxial Mounting Plate MCOS-08T
JCOPTIX 16 mm cage plates mount various optic sizes for flexible modules and rapid alignment. Central holes have multiple specifications, with retaining rings or rubber-tipped screw retention. Each has 4 Ø4 mm holes for Ø4 mm rods, sliding freely and locking with side M4 screws. 16 mm plate with SM05 hole. Model: MCOS-SM05. Central SM05 (0.535"-40) thread. For Ø12.7 mm optics. Top M3 and bottom 4-40 holes. JCOPTIX MCOS-SM05 has an SM05 (0.535"-40) hole and 6.4 mm thickness, accepting Ø12.7 mm optics up to 3 mm thick. 2 supplied SM05 rings secure optics. All 4 rod holes have side M4 screws tightened with a 2.0 mm key. 16 mm plates for Ø5 mm to Ø12 mm optics. Models: MCOS-05T, MCOS-06T, MCOS-07T, MCOS-08T, MCOS-09T, MCOS-10T, MCOS-11T, MCOS-12T. Two-ring retention. For Ø5 mm to Ø12 mm optics. Top M3 and bottom 4-40 holes. JCOPTIX 16 mm plates have central M5.5-M12.5 threads for Ø5 mm to Ø12 mm optics, secured by two supplied rings. All 4 rod holes have side M4 screws accepting 2.0 mm keys. 16 mm plate with Ø16 mm smooth bore. Model: MCOS-16. Central Ø16 mm smooth hole. Thickness 6.4 mm. Top M3 and bottom 4-40 holes. JCOPTIX 16 mm plates have Ø16 mm central bores for Ø16 mm optics, secured by supplied M4 rubber-tipped screws. All 4 rod holes have side M4 locking screws accepting 2.0 mm keys.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Body Material | 6061-T6 |
| Surface Treatment | Black Anodized |
| Thickness | 7.6 mm |
| Compatible optical element diameter | Ø8 mm |
| Maximum compatible optical element thickness | 4.4 mm |
| Element retention method | Dual Retaining Ring Fixing |
| Clear Aperture Dimension | Ø6.8 mm |
| Central Tapped Hole Specifications | M8.5 × 0.5 Tapped Hole |
| Top Tapped Hole | M3 |
| Bottom Threaded Hole | US 4-40 |
| Compatible Post Diameter | 4 mm |
| Cage Post Locking Screw Specifications | M4 |
| Included Retaining Ring Specifications and Quantity | SM8RR/2 |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
aj13(b3) Mounting Bases Jyxjgd
-
aj13(b4)+al13-9 Mounting Bases Jyxjgd
-
Platform Clamping Block MBB-RR Mounting Bases Jcoptix
Quantity: 1 Countersunk hole specification: M6 Maximum Clampable Part Thickness: 6.4 mm
JCOPTIX table clamps secure optomechanics where suitable mounting holes are absent. Adjustable placement reaches available holes and reduces assembly time. Rigid one-piece construction and slots improve mounting flexibility; different structures suit different component thicknesses/shapes. General-purpose table clamps. Models: MBB-TC5-P6, MBB-TC5. Maximum thickness: 12.7 mm. Fit most common optomechanics. Size: 50.8 mm × 19 mm × 17.3 mm. M6 slot length: 29.0 mm. JCOPTIX general clamps suit MBB-05S, MBB-05D, MBB-05L, and other common components. Size is 50.8 mm × 19 mm × 17.3 mm. M6 slots and M6 cap screws secure components up to 12.7 mm thick in any direction on tables/breadboards. Height-adjustable clamps. Models: MBB-TC3-P6, MBB-TC3. Screw-adjustable component thickness. Fit most common optomechanics. Size: 50.8 mm × 12.7 mm × 9.4 mm. M6 slot length: 29 mm. JCOPTIX clamps suit MBB-05S, MBB-05D, MBB-05L, breadboards, and similar items. Size: 50.8 mm × 12.7 mm × 9.4 mm. M6 slots/M6 cap screws allow any mounting direction. Component thickness depends on installed screw length. Included: one M6 × 30 cap screw, one M6 × 20 cap screw, and matching M6 nut. The nut only prevents screw loss and can be removed if inconvenient. Sold individually or in packs of six. Clamps for 19 mm dovetail rails. Models: MBB-RR-P6, MBB-RR. Maximum thickness: 6.4 mm. Wedge head for rails. M6 slots. JCOPTIX wedge-headed clamps specifically secure dovetail rails using M6 slots and M6 cap screws in any table/breadboard direction. They also clamp components thinner than 6.4 mm.
-
Base Position Stop MBA-FP Mounting Bases Jcoptix
Material: 6061-T6 Surface Treatment: Black Anodized Compatible Screw Specifications: M6
JCOPTIX base locators mark post-base or square-base positions for realignment after removal. A rotating version turns through 200° for flexible placement. Base locators: applicable models MBA-FP-P6, MBA-FP, and MBA-FPS; two-point location of Ø25 mm and Ø38 mm posts; three-point square-base location; slotted fastening. Three marked contact points locate square parts; two outer-arm points locate posts. Screws or clamps secure the locator, including when direct attachment to table threads is unavailable. MBA-FP-P6 is sold in groups of 6. Adjusting the MBA-FPS tension screw allows 200° head rotation for varied square-component positions and angles. Square corner radii must be below R1.5. Bases with radii above R1.5 but below R10 require two locators.
-
Base Position Stop MBA-FPS Mounting Bases Jcoptix
Material: 6061-T6 Surface Treatment: Black Anodized Compatible Screw Specifications: M6
JCOPTIX base locators mark post-base or square-base positions for realignment after removal. A rotating version turns through 200° for flexible placement. Base locators: applicable models MBA-FP-P6, MBA-FP, and MBA-FPS; two-point location of Ø25 mm and Ø38 mm posts; three-point square-base location; slotted fastening. Three marked contact points locate square parts; two outer-arm points locate posts. Screws or clamps secure the locator, including when direct attachment to table threads is unavailable. MBA-FP-P6 is sold in groups of 6. Adjusting the MBA-FPS tension screw allows 200° head rotation for varied square-component positions and angles. Square corner radii must be below R1.5. Bases with radii above R1.5 but below R10 require two locators.
Related Articles
The LZFL405‑80mW‑3 series from Shenzhen Leirte Optoelectronics Co., Ltd. is a coaxial‑packaged violet‑blue single‑mode fiber‑coupled laser diode. It delivers 80 mW continuous‑wave output at 405 nm. Light is coupled into 3 μm core‑diameter single‑mode fiber for clean beam quality and easy integration into diverse optical systems. It serves as a compact violet‑blue light source for medical instruments and industrial printing applications.
Macro channel water-cooled stacked laser diodes integrate dozens of laser bars into one vertical stacked module with large-diameter macro flow cooling channels.
CytoViva delivers comprehensive hyperspectral imaging solutions covering visible to near-infrared spectrum, compatible with brightfield, fluorescence and proprietary enhanced darkfield microscopy modes.
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
Loading...
Name
Phone
Organization
Use Case
Database Platform