Mirror Mount with Base MMA-BS3
JCOPTIX mirror mounts with bases combine a mirror mount and adapter base. Base countersunk holes attach directly to optical tables at a 50 mm optical-axis height. Two precision adjusters provide pitch/yaw control. Assemblies and separate bases MMA-BS1, MMA-BS2, MMA-BS3, MMA-BS4 are available as needed. Round two-axis optical mounts with bases. Models: MMM-05B, MMM-1B, MMM-2B. Accept Ø12.7 mm, Ø25.4 mm, Ø50.8 mm optics; 50 mm optical-axis height for direct table mounting; two precision adjusters. JCOPTIX mounts accept standard round optics, secured by an M4 rubber-tip side screw and a two-line locating bore. M6 cap screws secure the mount to an optical table at a 50 mm optical-axis height. Users can build suitable beam paths accordingly; the relatively low 50 mm height improves overall stability. Edge-free optical mounts with bases. Models: MMCE-05B, MMCE-1B. Accept Ø12.7 mm or Ø25.4 mm optics, 2 mm to 6.5 mm thick; 50 mm optical-axis height for direct table mounting. These mounts suit closely spaced beam reflections and accept Ø12.7 mm or Ø25.4 mm optics 2 mm to 6.5 mm thick. Rubber-tip set screws secure optics, and two precision screw adjusters provide ±4° pitch/yaw. M6 cap screws mount them to optical tables at a 50 mm optical-axis height. Suitable beam paths can be built accordingly; the relatively low 50 mm height improves overall stability. D-shaped two-axis optical mount with base. Model: MMD-1LB. For D-shaped optics; two high-precision adjusters; 50 mm optical-axis height for direct table mounting. Two rubber-tip set screws secure the D-shaped optic. The compact design maximizes clear aperture and avoids obstructing other beams in beam-selection applications. Two M6 × 0.25 adjusters provide ±4° pitch/yaw with 0.38°/turn adjustment precision. M6 cap screws mount it directly to an optical table at a 50 mm optical-axis height. Users can build suitable beam paths accordingly; the relatively low 50 mm height improves overall stability. Optical-mount adapter bases. Models: MMA-BS1, MMA-BS2, MMA-BS3, MMA-BS4. Fit multiple adjustable mounts; 3 M4 threaded holes and one M6 countersunk hole; 50 mm optical-axis height. JCOPTIX bases combine with various adjustable mounts. There are 3 M4 threaded mounting holes and locating features; M4 cap screws attach the selected mount. A matching base provides a 50 mm optical-axis height and an M6 countersunk hole to attach to an optical table. The four bases MMA-BS1, MMA-BS2, MMA-BS3, MMA-BS4 adapt 0.5-inch, 1-inch, 2-inch, and D-shaped mounts respectively.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Body Material | 6061-T6 |
| Included Screw Model | Hex Socket Head Cap Screws M4 × 10 and M6 × 10 |
| Mounting Surface Height | 10.4 mm |
| Compatible Mount | 2-Inch Optical Mount |
| Mounting hole specification | M4 Threaded Hole |
| General Parameters - Optical Axis Height [Optical Axis Height After Combining with Compatible Optical Adjustment Mount; Base's Own Mounting Surface Height Listed Separately] | 50 mm |
| General Parameters - Surface Finish | Black Anodized |
| General Parameters - Base Countersunk Hole Specifications | M6 Countersunk Hole |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
aj13(b3) Mounting Bases Jyxjgd
-
aj13(b4)+al13-9 Mounting Bases Jyxjgd
-
Platform Clamping Block MBB-RR Mounting Bases Jcoptix
Quantity: 1 Countersunk hole specification: M6 Maximum Clampable Part Thickness: 6.4 mm
JCOPTIX table clamps secure optomechanics where suitable mounting holes are absent. Adjustable placement reaches available holes and reduces assembly time. Rigid one-piece construction and slots improve mounting flexibility; different structures suit different component thicknesses/shapes. General-purpose table clamps. Models: MBB-TC5-P6, MBB-TC5. Maximum thickness: 12.7 mm. Fit most common optomechanics. Size: 50.8 mm × 19 mm × 17.3 mm. M6 slot length: 29.0 mm. JCOPTIX general clamps suit MBB-05S, MBB-05D, MBB-05L, and other common components. Size is 50.8 mm × 19 mm × 17.3 mm. M6 slots and M6 cap screws secure components up to 12.7 mm thick in any direction on tables/breadboards. Height-adjustable clamps. Models: MBB-TC3-P6, MBB-TC3. Screw-adjustable component thickness. Fit most common optomechanics. Size: 50.8 mm × 12.7 mm × 9.4 mm. M6 slot length: 29 mm. JCOPTIX clamps suit MBB-05S, MBB-05D, MBB-05L, breadboards, and similar items. Size: 50.8 mm × 12.7 mm × 9.4 mm. M6 slots/M6 cap screws allow any mounting direction. Component thickness depends on installed screw length. Included: one M6 × 30 cap screw, one M6 × 20 cap screw, and matching M6 nut. The nut only prevents screw loss and can be removed if inconvenient. Sold individually or in packs of six. Clamps for 19 mm dovetail rails. Models: MBB-RR-P6, MBB-RR. Maximum thickness: 6.4 mm. Wedge head for rails. M6 slots. JCOPTIX wedge-headed clamps specifically secure dovetail rails using M6 slots and M6 cap screws in any table/breadboard direction. They also clamp components thinner than 6.4 mm.
-
Base Position Stop MBA-FP Mounting Bases Jcoptix
Material: 6061-T6 Surface Treatment: Black Anodized Compatible Screw Specifications: M6
JCOPTIX base locators mark post-base or square-base positions for realignment after removal. A rotating version turns through 200° for flexible placement. Base locators: applicable models MBA-FP-P6, MBA-FP, and MBA-FPS; two-point location of Ø25 mm and Ø38 mm posts; three-point square-base location; slotted fastening. Three marked contact points locate square parts; two outer-arm points locate posts. Screws or clamps secure the locator, including when direct attachment to table threads is unavailable. MBA-FP-P6 is sold in groups of 6. Adjusting the MBA-FPS tension screw allows 200° head rotation for varied square-component positions and angles. Square corner radii must be below R1.5. Bases with radii above R1.5 but below R10 require two locators.
-
Base Position Stop MBA-FPS Mounting Bases Jcoptix
Material: 6061-T6 Surface Treatment: Black Anodized Compatible Screw Specifications: M6
JCOPTIX base locators mark post-base or square-base positions for realignment after removal. A rotating version turns through 200° for flexible placement. Base locators: applicable models MBA-FP-P6, MBA-FP, and MBA-FPS; two-point location of Ø25 mm and Ø38 mm posts; three-point square-base location; slotted fastening. Three marked contact points locate square parts; two outer-arm points locate posts. Screws or clamps secure the locator, including when direct attachment to table threads is unavailable. MBA-FP-P6 is sold in groups of 6. Adjusting the MBA-FPS tension screw allows 200° head rotation for varied square-component positions and angles. Square corner radii must be below R1.5. Bases with radii above R1.5 but below R10 require two locators.
Related Articles
The LZFL405‑80mW‑3 series from Shenzhen Leirte Optoelectronics Co., Ltd. is a coaxial‑packaged violet‑blue single‑mode fiber‑coupled laser diode. It delivers 80 mW continuous‑wave output at 405 nm. Light is coupled into 3 μm core‑diameter single‑mode fiber for clean beam quality and easy integration into diverse optical systems. It serves as a compact violet‑blue light source for medical instruments and industrial printing applications.
Macro channel water-cooled stacked laser diodes integrate dozens of laser bars into one vertical stacked module with large-diameter macro flow cooling channels.
CytoViva delivers comprehensive hyperspectral imaging solutions covering visible to near-infrared spectrum, compatible with brightfield, fluorescence and proprietary enhanced darkfield microscopy modes.
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
Loading...
Name
Phone
Organization
Use Case
Database Platform