30 mm Coaxial Plate MCO-12.5B
JCOPTIX 30 mm cage plates flexibly build large optomechanical modules with fast alignment. Different center apertures mount Ø12.7 mm or Ø25.4 mm optics or SM1 lens tubes in 30 mm cages. Bottom M4 holes attach 12.7 mm posts. The 4 Ø6 mm cage bores slide along rods and lock at position with side M4 screws. 30 mm cage plates, SM1 aperture. Models: MCO-9A, MCO-12.5A, MCO-12.5B. Central SM1 (1.035-inch-40) thread; thickness 9 mm or 12.7 mm; accepts Ø25.4 mm optics; bottom M4 hole. JCOPTIX MCO-9A, MCO-12.5A, MCO-12.5B have SM1 (1.035-inch-40) apertures for Ø25.4 mm optics secured by supplied SM1 rings. Each of 4 cage bores has side M4 locking screws accepting 2.0 mm keys. Bottom M4 threads mount posts. 30 mm cage plate with multiple SM1 apertures. Model: MCO-9A3. 3 standard SM1 (Ø1.035-inch-40) holes; thickness 9 mm; top/bottom M4 holes. This JCOPTIX 30 mm plate has 3 SM1 (1.035-inch-40) apertures for Ø25.4 mm optics, with supplied SM1 rings. Standard side M4 holes/locking screws secure the plate; top/bottom M4 holes attach posts for more applications. 30 mm cage plate, SM05 aperture. Model: MCO-9SM05. SM05 (0.535-inch-40) center; thickness 9 mm; Ø12.7 mm optics; 2 SM05 rings; bottom M4 hole. MCO-9SM05 has an SM05 (0.535-inch-40) center and 9 mm thickness, accepting Ø12.7 mm optics up to 5 mm thick, secured with 2 supplied SM05 rings. Each of 4 cage bores has side M4 screws accepting 2.0 mm keys; a bottom M4 hole mounts posts. 30 mm cage plate, Ø25.6 mm smooth bore. Model: MCO-12.5C. Thickness 12.7 mm; Ø25.4 mm optics; bottom M4 hole. MCO-12.5C accepts Ø25.4 mm optics and is 12.7 mm thick. The Ø25.6 mm smooth bore has a locating shoulder; a top M4 rubber-tip screw secures optics. Each of 4 cage-rod bores has 2 side M4 locking screws accepting 2.0 mm keys; bottom M4 threads mount posts. 30 mm cage plate, Ø30.5 mm smooth bore. Model: MCO-9LH. Ø30.5 mm center; thickness 9 mm; standard SM1 tubes. MCO-9LH has an Ø30.5 mm smooth bore and 9 mm thickness for standard SM1 tubes, locked by a supplied M4 rubber-tip screw. Each of 4 cage bores has side M4 locking screws accepting 2.0 mm keys. 30 mm cage plate, RMS thread. Model: MCO-9RMS. RMS (0.800-inch-36) through-thread; thickness 9 mm; bottom M4 hole. MCO-9RMS has a 9 mm-thick RMS through-thread for microscope objectives or other RMS optics. Its 4 cage bores fit MCR rods, with side M4 screws accepting 2.0 mm keys. Round 30 mm cage plates, SM1 aperture. Models: MCO-9B, MCO-9BT. SM1 (1.035-inch-40) center; MCO-9B has Ø50.8 mm smooth exterior, MCO-9BT SM2 external threads; accepts Ø25.4 mm optics; no M4 mounting hole, so cannot accept 12.7 mm posts. These JCOPTIX plates have SM1 (1.035-inch-40) apertures for Ø25.4 mm optics secured by supplied SM1 rings. Each of 4 cage bores has side M4 locking screws accepting 2.0 mm keys. No M4 mounting hole is provided, so 12.7 mm posts cannot be attached.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Body Material | 6061-T6 |
| Surface Treatment | Black Anodized |
| Thickness | 12.7 mm |
| Compatible optical element diameter | Ø25.4 mm |
| Maximum compatible optical element thickness | 8.5 mm |
| Clear Aperture Dimension | Ø23 mm |
| Element retention method | Locating Shoulder + Single Retaining Ring Fixing |
| Center hole specification | SM1 Tapped Hole |
| Bottom Connection Hole | M4 |
| Cage Rod Locking Screw Specifications | M4 |
| Included Retaining Ring Specifications and Quantity | 1 SM1 Retaining Ring |
| Compatible retaining ring spanner model (not included) | MBT-SM1 |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
aj13(b3) Mounting Bases Jyxjgd
-
aj13(b4)+al13-9 Mounting Bases Jyxjgd
-
Platform Clamping Block MBB-RR Mounting Bases Jcoptix
Quantity: 1 Countersunk hole specification: M6 Maximum Clampable Part Thickness: 6.4 mm
JCOPTIX table clamps secure optomechanics where suitable mounting holes are absent. Adjustable placement reaches available holes and reduces assembly time. Rigid one-piece construction and slots improve mounting flexibility; different structures suit different component thicknesses/shapes. General-purpose table clamps. Models: MBB-TC5-P6, MBB-TC5. Maximum thickness: 12.7 mm. Fit most common optomechanics. Size: 50.8 mm × 19 mm × 17.3 mm. M6 slot length: 29.0 mm. JCOPTIX general clamps suit MBB-05S, MBB-05D, MBB-05L, and other common components. Size is 50.8 mm × 19 mm × 17.3 mm. M6 slots and M6 cap screws secure components up to 12.7 mm thick in any direction on tables/breadboards. Height-adjustable clamps. Models: MBB-TC3-P6, MBB-TC3. Screw-adjustable component thickness. Fit most common optomechanics. Size: 50.8 mm × 12.7 mm × 9.4 mm. M6 slot length: 29 mm. JCOPTIX clamps suit MBB-05S, MBB-05D, MBB-05L, breadboards, and similar items. Size: 50.8 mm × 12.7 mm × 9.4 mm. M6 slots/M6 cap screws allow any mounting direction. Component thickness depends on installed screw length. Included: one M6 × 30 cap screw, one M6 × 20 cap screw, and matching M6 nut. The nut only prevents screw loss and can be removed if inconvenient. Sold individually or in packs of six. Clamps for 19 mm dovetail rails. Models: MBB-RR-P6, MBB-RR. Maximum thickness: 6.4 mm. Wedge head for rails. M6 slots. JCOPTIX wedge-headed clamps specifically secure dovetail rails using M6 slots and M6 cap screws in any table/breadboard direction. They also clamp components thinner than 6.4 mm.
-
Base Position Stop MBA-FP Mounting Bases Jcoptix
Material: 6061-T6 Surface Treatment: Black Anodized Compatible Screw Specifications: M6
JCOPTIX base locators mark post-base or square-base positions for realignment after removal. A rotating version turns through 200° for flexible placement. Base locators: applicable models MBA-FP-P6, MBA-FP, and MBA-FPS; two-point location of Ø25 mm and Ø38 mm posts; three-point square-base location; slotted fastening. Three marked contact points locate square parts; two outer-arm points locate posts. Screws or clamps secure the locator, including when direct attachment to table threads is unavailable. MBA-FP-P6 is sold in groups of 6. Adjusting the MBA-FPS tension screw allows 200° head rotation for varied square-component positions and angles. Square corner radii must be below R1.5. Bases with radii above R1.5 but below R10 require two locators.
-
Base Position Stop MBA-FPS Mounting Bases Jcoptix
Material: 6061-T6 Surface Treatment: Black Anodized Compatible Screw Specifications: M6
JCOPTIX base locators mark post-base or square-base positions for realignment after removal. A rotating version turns through 200° for flexible placement. Base locators: applicable models MBA-FP-P6, MBA-FP, and MBA-FPS; two-point location of Ø25 mm and Ø38 mm posts; three-point square-base location; slotted fastening. Three marked contact points locate square parts; two outer-arm points locate posts. Screws or clamps secure the locator, including when direct attachment to table threads is unavailable. MBA-FP-P6 is sold in groups of 6. Adjusting the MBA-FPS tension screw allows 200° head rotation for varied square-component positions and angles. Square corner radii must be below R1.5. Bases with radii above R1.5 but below R10 require two locators.
Related Articles
The LZFL405‑80mW‑3 series from Shenzhen Leirte Optoelectronics Co., Ltd. is a coaxial‑packaged violet‑blue single‑mode fiber‑coupled laser diode. It delivers 80 mW continuous‑wave output at 405 nm. Light is coupled into 3 μm core‑diameter single‑mode fiber for clean beam quality and easy integration into diverse optical systems. It serves as a compact violet‑blue light source for medical instruments and industrial printing applications.
Macro channel water-cooled stacked laser diodes integrate dozens of laser bars into one vertical stacked module with large-diameter macro flow cooling channels.
CytoViva delivers comprehensive hyperspectral imaging solutions covering visible to near-infrared spectrum, compatible with brightfield, fluorescence and proprietary enhanced darkfield microscopy modes.
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
Loading...
Name
Phone
Organization
Use Case
Database Platform