High-Performance Pneumatic Vibration Isolation Marble Optical Table TTAS-2015M
JCOPTIX high-performance pneumatic-isolation marble tables use naturally aged premium stone with released internal stress and long-term deformation resistance. Precision grinding achieves grade 00 flatness and 0.63 μm roughness. Marble is naturally nonmagnetic, rust-resistant, and wear-resistant. Low thermal/load deformation gives high flatness, rigidity, reliability, and stability. Independent cylindrical pneumatic legs avoid overall resonance. Internal three-wire pendulums minimize vibration and precisely reposition tops after disturbance. Conventional laminar damping uses an orifice between primary/secondary chambers to compress/release gas for stability. Micrometer-scale damping replaces one chamber with many tiny holes, increasing efficiency and reducing amplitude. Hybrid chambers increase compliant volume within a given size and lower natural frequency. High-performance pneumatic marble tables. Models: TTAS-1008M, TTAS-1208M, TTAS-1510M, TTAS-1512M, TTAS-1812M, TTAS-2010M, TTAS-2012M, TTAS-2015M, TTAS-2412M. Flatness: grade 00. Roughness: 0.63 μm. Vibration criterion: VC-D. Vertical: 1-1.8 Hz; horizontal: 1-1.8 Hz, depending on load/use. JCOPTIX uses naturally aged Indian M10 stone with released stress, low thermal/load deformation, reliability, and stability. Precision grinding gives high flatness, low roughness, and wear resistance. Marble is weakly magnetic, nearly nonmagnetic, for sensitive settings. Three-wire pendulum legs use sensitive US-imported valve cores, automatic inflation/leveling, short response, and rapid balancing. Repositioning accuracy: ±0.05 mm. Isolation frequencies: vertical 1-1.8 Hz, horizontal 1-1.8 Hz, load/use dependent. Carbon-steel supports can be customized as weakly magnetic stainless legs. Float range: 0~20 mm. Vibration criterion: VC-D. 9 standard sizes are available. Tops weighing <2000 kg use 4 legs; ≥2000 kg use 6. Contact customer service for custom leg materials, top dimensions/shapes, or threaded inserts.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Platform Dimensions | 2000 mm × 1500 mm × 250 mm |
| Platform Height | 800 mm |
| Platform Flatness | 7 μm |
| Tabletop Thickness | 250 mm |
| Product Weight | 2418 kg |
| Maximum Load Capacity | 750 kg |
| Number of Support Legs | 6 |
| Marble Density | 2970-3070 kg/m³ |
| Compressive strength | 284 MPa |
| Elastic Modulus | 1.0 GPa |
| Linear Thermal Expansion Coefficient | 8 × 10⁻⁶/℃ |
| Water Absorption | < 0.13% |
| Lifting Hole Specifications | M24 |
| Shore Hardness | HS ≥ 70 |
| Platform Surface Roughness | 0.63 μm |
| Flatness Grade | Grade 00 |
| Vibration isolation method | Pneumatic Vibration Isolation |
| Vibration Isolation Structure | Three-Wire Pendulum Rod, Hybrid Chamber Structure |
| Operating Return Position Accuracy | ±0.05 mm |
| Natural frequency [Vertical 1-1.8 Hz; Horizontal 1-1.8 Hz; Depends on Load and Actual Use] | Vertical: 1Hz-1.8Hz, Horizontal: 1Hz-1.8Hz (Depends on Load and Actual Use) |
| Vibration amplitude | < 0.002 |
| Air Supply | Standard Quiet Air Compressor (Noise: 52 dB) |
| Top Height Adjustment | ±10 mm |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Welded Instrument Rack TTWF-HB Optical Tables and Breadboards Jcoptix
Dimensions: 500 mm × 600 mm Included Accessories: TTWF-GB × 4 Mounting Method: Bolted Connection
JCOPTIX welded optical-table instrument racks provide ample storage for managing materials and equipment. Their independent structure does not directly contact the table or affect vibration isolation. Two adjustable-height shelves each carry up to 100 kg and provide greater storage space. Equipped with 4 PDUs, they offer basic power and overload protection plus lightning/surge protection, antistatic and fire protection. Compared with ordinary power strips, PDUs emphasize stability and safety, offer higher rated power and longer life, and meet high-power equipment needs. Expansion holes in both side columns accommodate laptop/monitor arms, pegboards, and other accessories. Standard welded racks fit JCOPTIX tables 1.2-4 m long. Rack dimensions, shelf count, outlet quantity and locations, and other specifications can be customized; contact technical support for special sizes. Welded rack accessories. Models: TTWF-HB, TTWF-GB, TTWF-LS, TTWF-MS, TTWF-LT. Monitor and laptop arms. Remotely controlled LED tubes. Pegboard accessories. These accessories require welded racks. Monitor and laptop arms save space and simplify laboratory operation. Large height and rotation ranges and gas-spring construction accommodate the loads and sizes of most market laptops and monitors. LED tubes support remote or button adjustment. Two installation methods are standard: drilled connections when purchased with a rack, or supplied nano adhesive for separate purchases. Pegboards include four storage boxes for everyday parts and small devices. Remaining space accepts additional boxes or hanging items.
-
Welded Instrument Rack TTWF-GB Optical Tables and Breadboards Jcoptix
Dimensions: 190 mm × 105 mm × 75 mm Included Accessories: Clip × 1 Mounting Method: Clip-On
JCOPTIX welded optical-table instrument racks provide ample storage for managing materials and equipment. Their independent structure does not directly contact the table or affect vibration isolation. Two adjustable-height shelves each carry up to 100 kg and provide greater storage space. Equipped with 4 PDUs, they offer basic power and overload protection plus lightning/surge protection, antistatic and fire protection. Compared with ordinary power strips, PDUs emphasize stability and safety, offer higher rated power and longer life, and meet high-power equipment needs. Expansion holes in both side columns accommodate laptop/monitor arms, pegboards, and other accessories. Standard welded racks fit JCOPTIX tables 1.2-4 m long. Rack dimensions, shelf count, outlet quantity and locations, and other specifications can be customized; contact technical support for special sizes. Welded rack accessories. Models: TTWF-HB, TTWF-GB, TTWF-LS, TTWF-MS, TTWF-LT. Monitor and laptop arms. Remotely controlled LED tubes. Pegboard accessories. These accessories require welded racks. Monitor and laptop arms save space and simplify laboratory operation. Large height and rotation ranges and gas-spring construction accommodate the loads and sizes of most market laptops and monitors. LED tubes support remote or button adjustment. Two installation methods are standard: drilled connections when purchased with a rack, or supplied nano adhesive for separate purchases. Pegboards include four storage boxes for everyday parts and small devices. Remaining space accepts additional boxes or hanging items.
-
Welded Instrument Rack TTWF-LS Optical Tables and Breadboards Jcoptix
Mounting Method: Desk Hole (Aperture: 10-60 mm), Desk Clamp (Thickness: 10-90 mm) Load: 0.85-7.85 kg Compatible Size: 10-17 inch
JCOPTIX welded optical-table instrument racks provide ample storage for managing materials and equipment. Their independent structure does not directly contact the table or affect vibration isolation. Two adjustable-height shelves each carry up to 100 kg and provide greater storage space. Equipped with 4 PDUs, they offer basic power and overload protection plus lightning/surge protection, antistatic and fire protection. Compared with ordinary power strips, PDUs emphasize stability and safety, offer higher rated power and longer life, and meet high-power equipment needs. Expansion holes in both side columns accommodate laptop/monitor arms, pegboards, and other accessories. Standard welded racks fit JCOPTIX tables 1.2-4 m long. Rack dimensions, shelf count, outlet quantity and locations, and other specifications can be customized; contact technical support for special sizes. Welded rack accessories. Models: TTWF-HB, TTWF-GB, TTWF-LS, TTWF-MS, TTWF-LT. Monitor and laptop arms. Remotely controlled LED tubes. Pegboard accessories. These accessories require welded racks. Monitor and laptop arms save space and simplify laboratory operation. Large height and rotation ranges and gas-spring construction accommodate the loads and sizes of most market laptops and monitors. LED tubes support remote or button adjustment. Two installation methods are standard: drilled connections when purchased with a rack, or supplied nano adhesive for separate purchases. Pegboards include four storage boxes for everyday parts and small devices. Remaining space accepts additional boxes or hanging items.
-
Welded Instrument Rack TTWF-MS Optical Tables and Breadboards Jcoptix
Mounting Method: Desk Hole (Aperture: 10-60 mm), Desk Clamp (Thickness: 10-90 mm) Load: 2-9 kg Compatible Size: 17-32 inch
JCOPTIX welded optical-table instrument racks provide ample storage for managing materials and equipment. Their independent structure does not directly contact the table or affect vibration isolation. Two adjustable-height shelves each carry up to 100 kg and provide greater storage space. Equipped with 4 PDUs, they offer basic power and overload protection plus lightning/surge protection, antistatic and fire protection. Compared with ordinary power strips, PDUs emphasize stability and safety, offer higher rated power and longer life, and meet high-power equipment needs. Expansion holes in both side columns accommodate laptop/monitor arms, pegboards, and other accessories. Standard welded racks fit JCOPTIX tables 1.2-4 m long. Rack dimensions, shelf count, outlet quantity and locations, and other specifications can be customized; contact technical support for special sizes. Welded rack accessories. Models: TTWF-HB, TTWF-GB, TTWF-LS, TTWF-MS, TTWF-LT. Monitor and laptop arms. Remotely controlled LED tubes. Pegboard accessories. These accessories require welded racks. Monitor and laptop arms save space and simplify laboratory operation. Large height and rotation ranges and gas-spring construction accommodate the loads and sizes of most market laptops and monitors. LED tubes support remote or button adjustment. Two installation methods are standard: drilled connections when purchased with a rack, or supplied nano adhesive for separate purchases. Pegboards include four storage boxes for everyday parts and small devices. Remaining space accepts additional boxes or hanging items.
-
Welded Instrument Rack TTWF-LT Optical Tables and Breadboards Jcoptix
Mounting Method: Removable Adhesive, Drilling (Only When Ordered Together with Instrument Stand) Length: 1.2 m Control Method: Remote Control, Buttons
JCOPTIX welded optical-table instrument racks provide ample storage for managing materials and equipment. Their independent structure does not directly contact the table or affect vibration isolation. Two adjustable-height shelves each carry up to 100 kg and provide greater storage space. Equipped with 4 PDUs, they offer basic power and overload protection plus lightning/surge protection, antistatic and fire protection. Compared with ordinary power strips, PDUs emphasize stability and safety, offer higher rated power and longer life, and meet high-power equipment needs. Expansion holes in both side columns accommodate laptop/monitor arms, pegboards, and other accessories. Standard welded racks fit JCOPTIX tables 1.2-4 m long. Rack dimensions, shelf count, outlet quantity and locations, and other specifications can be customized; contact technical support for special sizes. Welded rack accessories. Models: TTWF-HB, TTWF-GB, TTWF-LS, TTWF-MS, TTWF-LT. Monitor and laptop arms. Remotely controlled LED tubes. Pegboard accessories. These accessories require welded racks. Monitor and laptop arms save space and simplify laboratory operation. Large height and rotation ranges and gas-spring construction accommodate the loads and sizes of most market laptops and monitors. LED tubes support remote or button adjustment. Two installation methods are standard: drilled connections when purchased with a rack, or supplied nano adhesive for separate purchases. Pegboards include four storage boxes for everyday parts and small devices. Remaining space accepts additional boxes or hanging items.
Related Articles
The LZFL405‑80mW‑3 series from Shenzhen Leirte Optoelectronics Co., Ltd. is a coaxial‑packaged violet‑blue single‑mode fiber‑coupled laser diode. It delivers 80 mW continuous‑wave output at 405 nm. Light is coupled into 3 μm core‑diameter single‑mode fiber for clean beam quality and easy integration into diverse optical systems. It serves as a compact violet‑blue light source for medical instruments and industrial printing applications.
Macro channel water-cooled stacked laser diodes integrate dozens of laser bars into one vertical stacked module with large-diameter macro flow cooling channels.
CytoViva delivers comprehensive hyperspectral imaging solutions covering visible to near-infrared spectrum, compatible with brightfield, fluorescence and proprietary enhanced darkfield microscopy modes.
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
Loading...
Name
Phone
Organization
Use Case
Database Platform