8MTL220 - Direct Drive Linear Translation Stage 8MTL220-400-LEn1
Save to Favorites
Specifications
| Parameter | Value |
|---|---|
| Travel Range | 400 mm |
| Encoder Type | Optical |
| Encoder Model | LEN1 |
| Encoder Resolution [on demand] | Any of the range: 25 nm to 5 µm (on demand) |
| Encoder Interface | Differential RS422 |
| Internal Multiplier | YES |
| Multiplication factor [on demand] | 4-200 (on demand) |
| Encoder Grating Period | 20 µm |
| Reference Mark (Index) | Yes |
| Absolute Accuracy-Before Calibration | ±10 µm |
| Absolute Accuracy-After Calibration | ±1 µm |
| Bi-Directional Repeatability (peak to peak) | ±0.5 µm |
| Bi-Directional Repeatability (RMS) | ±0.26 µm |
| Pitch [Paired values are given in µrad / arcsec, respectively] | ±30 / ±6.20 |
| Yaw [Paired values are given in µrad / arcsec, respectively] | ±30 / ±6.20 |
| Maximum Velocity (with load 4kg) | <2000 mm/s |
| Maximum Acceleration (with load 4kg) | <20000 mm/s² |
| Limits Switches Type (Safety) | Optical (Optrons) |
| Limit Switch Polarity (Safety) | Pushed is closed |
| Limit Switch Voltage | 5…24 |
| Design Type | Linear Motor Stage |
| Linear Motor Model | LM4 |
| Linear Motor Design Type | Ironless BLDC motor |
| Maximum Bus Voltage | >300 V_DC |
| Load Capacity-Horizontal [Centrally Placed] | 100 kg |
| Moving Mass | 9.5 kg |
| Guiding System | Recirculating linear rails and carriages units with caged balls |
| Housing Material | Aluminum Alloy |
| Housing Coating (Finish) | Black Anodizing |
| Environment Pressure | Normal Atmosphere |
| Operating Temperature | 20±2 °C |
| Recommended Controllers | ACS Products Line or 8SMC5-USB series |
| Recommended Drivers | ACS Products Line or 8SMC5-USB series |
| Recommended Power Supply | 2 phase / 3 phase source |
| Recommended Communication Interface | EtherCAT / RS232 / USB / TCP-IP |
| Cable Length [other by request] | 2 (other by request) |
| Base Plate for Mechanical Interface | Not required |
| XY Stack | Directly |
| Z Configuration | Not available (choose from other Standa stages series) |
| Dimensions of Moving Platform (W x L) | 225 mm × 225 mm |
| Overall Linear Stage Dimensions (W x L x H) | 780 mm × 297.5 mm × 100 mm |
| Measurement System | Metric |
| Orthogonality (XY Configuration) [Paired values are given in µrad / arcsec, respectively] | 24 / 5 |
| Protection Level | From solid particles and spray |
| RoHS | Compliant |
| Weight | 37 kg |
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Photoelectric switch Accessories Central-laser
Output form [Model=T3X-R18N]: NPN Output form [Model=T3X-R18P]: PNP Light Source [Shared by T3X-R18N/T3X-R18P (original merged columns)]: Red light-emitting diode LED
Photoelectric switch: compact, versatile, long-lived, accurate, fast-responding, and capable of long-distance detection, with strong resistance to optical, electrical, and magnetic interference. NPN (T3X-R18N) or PNP (T3X-R18P) outputs are available, with LIGHT-ON/DARK-ON selection and delay/timing functions.
-
Rotary axis (CK-ROT-M-80) Accessories Central-laser
Rotary axis dimensions [Model=CK-ROT-M-80]: 185 mm × 160 mm × 120 mm Rotary axis weight [Model=CK-ROT-M-80]: 4.95 kg Standard jaw clamping range [Model=CK-ROT-M-80]: 2~22 mm
Rotary-axis device CK-ROT-M-80 includes a driver, power supply, motor, and three-jaw chuck and works when connected to a laser-marking machine. Compact, stable, and detachable, with upward tilt to 90°, driver resolution of 0.009°, and round-head runout accuracy ≤0.04mm. Suitable for cylindrical-surface marking, circular text, jewelry, and graduated dials.
-
Rotary axis (CR-80/CR-100) Accessories Central-laser
Surface treatment [General table for the CR series]: Anodized Dimensions [General table for the CR series]: 295.9 mm × 285 mm × 223 mm Shaft-center height [General table for the CR series; Measured in horizontal placement]: 105 mm
CR-series high-speed rotary workholding fixture with 0–90° tilt: precision chuck and servo drive, freely adjustable and lockable working angle, suitable for marking, cutting, welding, and engraving. Optional chuck diameters are 80/100/125/160, with no diameter unit stated here; maximum load is 30kg.
-
Fume purifier, unit type (source wording) Accessories Central-laser
Air inlet interface [Model=CK-SP-S]: Φ75 Input Voltage [Model=CK-SP-S; 50/60HZ]: AC220 Rated Power [Model=CK-SP-S]: 200 W
Unit-type fume purifier, following the source wording: four-stage filtration, an efficient low-noise brushless DC motor, and a flexible extraction arm. Removes fumes and dust from laser marking, welding, and similar processes to improve the working environment.
-
Dual-position fume purifier Accessories Central-laser
Air inlet interface [Model=CK-SP-S200]: Φ75 Input Voltage [Model=CK-SP-S200; 50/60HZ]: AC220 Rated Power [Model=CK-SP-S200]: 150~200 W
Dual-position fume purifier with four-stage filtration, an efficient low-noise brushless DC motor, and a flexible extraction arm. Removes fumes and dust from laser marking, welding, and similar processes to improve the working environment.
Related Articles
The LZFL405‑80mW‑3 series from Shenzhen Leirte Optoelectronics Co., Ltd. is a coaxial‑packaged violet‑blue single‑mode fiber‑coupled laser diode. It delivers 80 mW continuous‑wave output at 405 nm. Light is coupled into 3 μm core‑diameter single‑mode fiber for clean beam quality and easy integration into diverse optical systems. It serves as a compact violet‑blue light source for medical instruments and industrial printing applications.
Wuhan Optics Valley Quantum Technology Co., Ltd. is a leading domestic developer of high‑speed semiconductor optical chips and photodetector components. Our product portfolio covers InGaAs avalanche photodiode bare dies and PIN photodetector chips designed for fiber‑optic communication
As a professional ultraviolet‑laser solution provider, Precilasers has launched its 266 nm narrow‑linewidth industrial laser, delivering reliable single‑frequency output for high‑precision interference lithography, semiconductor inspection and precision metrology applications.
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
Loading...
Name
Phone
Organization
Use Case
Database Platform