NIR Quest-2.2 NIRQUEST+2.2-10
NIR Quest + uses an enhanced optical platform for higher sensitivity, with configurations NIR Quest + 1.7 (900-1700nm), NIR Quest + 2.2 (900-2100nm), and NIR Quest + 2.5 (900-2500nm). The flagship NIRQuest + supports laboratory/online material characterization, recycled-plastic identification and liquid chemical-concentration measurements.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Spectral Range | 900 - 2120nm |
| Slit | 10 μm |
| Resolution | 3.12 |
| Optical filter | Y |
| Grating | 2，Spectrometer 100 Lines Blazed at 100 nm; SLIT 10 |
| Focal Length | F/4 101mm |
| Series optical resolution [Configuration dependent; FWHM] | 0.02-23.88nm FWHM (Configuration Dependent) |
| Series spectral range [Shared technical table for the series; configuration-specific values are listed separately] | 900-2100nm |
| Dynamic range (single scan) [Single scan] | 10,000:1 |
| Integration Time | 1ms - 1s |
| A/D resolution | 16 bit |
| Power Dissipation | DC input +5V, 5A maximum |
| Trigger mode | 2 Types |
| Gate delay | Yes |
| Connection port | 30-pin connector |
| Detector | InGaAs Linear-Array CCD |
| Pixels | 512 count |
| Pixel size | 25μm×500μm |
| Pixel well depth | 30pC(~188 Me- electrons) |
| Spectrometer design | Czerny–Turner Symmetric Crossed Design |
| Fiber Interface [FC Optional] | SMA905/FC (Optional) |
| Dark noise (@minimum integration time) [Minimum Integration Time; Value Labeled @100ms; @Minimum Integration Time; @Minimum Integration Time)] | 6 counts @100ms |
| Signal-to-noise ratio (single scan @10ms) [Heading: Single Scan @10ms; Value Label: @100ms; @10ms)] | 10000:1 @100ms |
| F-number (configuration dependent) [Configuration dependent] | f/3 |
| Scan rate (unbuffered) [Unbuffered] | 243 Hz |
| Linearity correction (10-90%) [10—90%] | 99.8% |
| Operating Temperature Range | 10-35℃ |
| Storage Temperature Range | -30-70 °C |
| Humidity (non-condensing) [Non-Condensing] | < 85% |
| Communication Interface | USB 2.0 @ 480Mbps; RS-232(2-wire)@115.2K baud(custom configuration) |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
BIM-6602A series high-resolution spectrometers UV-NIR BIM-6602A-15 Spectrometers Brolight
Fiber Connectors [BIM-6602A: Parameter Specifications]: SMA905 Detector [BIM-6602A: Parameter Specifications]: Hamamatsu S11639, Line-Array CMOS Detector Pixel [BIM-6602A: Parameter Specifications]: 2048 Pixels, Each Pixel 14μm×200μm
The BIM-6602A series spectrometer uses a high-resolution optomechanical structure in a compact, portable design, with resolution as fine as 0.08 nm. Interchangeable gratings adjust optical resolution and spectral range. Upgraded circuitry provides a 10000:1 dynamic range, minimum integration time of 0.5 milliseconds, and 600:1 signal-to-noise ratio for weak-signal detection. RS232 communication and improved interference resistance make it ideal for industrial and scientific applications.
-
BIM-6602A series high-resolution spectrometers UV-NIR BIM-6602A-16 Spectrometers Brolight
Fiber Connectors [BIM-6602A: Parameter Specifications]: SMA905 Detector [BIM-6602A: Parameter Specifications]: Hamamatsu S11639, Line-Array CMOS Detector Pixel [BIM-6602A: Parameter Specifications]: 2048 Pixels, Each Pixel 14μm×200μm
The BIM-6602A series spectrometer uses a high-resolution optomechanical structure in a compact, portable design, with resolution as fine as 0.08 nm. Interchangeable gratings adjust optical resolution and spectral range. Upgraded circuitry provides a 10000:1 dynamic range, minimum integration time of 0.5 milliseconds, and 600:1 signal-to-noise ratio for weak-signal detection. RS232 communication and improved interference resistance make it ideal for industrial and scientific applications.
-
BIM-6602A series high-resolution spectrometers UV-NIR BIM-6602A-17 Spectrometers Brolight
Fiber Connectors [BIM-6602A: Parameter Specifications]: SMA905 Detector [BIM-6602A: Parameter Specifications]: Hamamatsu S11639, Line-Array CMOS Detector Pixel [BIM-6602A: Parameter Specifications]: 2048 Pixels, Each Pixel 14μm×200μm
The BIM-6602A series spectrometer uses a high-resolution optomechanical structure in a compact, portable design, with resolution as fine as 0.08 nm. Interchangeable gratings adjust optical resolution and spectral range. Upgraded circuitry provides a 10000:1 dynamic range, minimum integration time of 0.5 milliseconds, and 600:1 signal-to-noise ratio for weak-signal detection. RS232 communication and improved interference resistance make it ideal for industrial and scientific applications.
-
BIM-6602A series high-resolution spectrometers UV-NIR BIM-6602A-18 Spectrometers Brolight
Fiber Connectors [BIM-6602A: Parameter Specifications]: SMA905 Detector [BIM-6602A: Parameter Specifications]: Hamamatsu S11639, Line-Array CMOS Detector Pixel [BIM-6602A: Parameter Specifications]: 2048 Pixels, Each Pixel 14μm×200μm
The BIM-6602A series spectrometer uses a high-resolution optomechanical structure in a compact, portable design, with resolution as fine as 0.08 nm. Interchangeable gratings adjust optical resolution and spectral range. Upgraded circuitry provides a 10000:1 dynamic range, minimum integration time of 0.5 milliseconds, and 600:1 signal-to-noise ratio for weak-signal detection. RS232 communication and improved interference resistance make it ideal for industrial and scientific applications.
-
BIM-6602A series high-resolution spectrometers UV-NIR BIM-6602A-19 Spectrometers Brolight
Fiber Connectors [BIM-6602A: Parameter Specifications]: SMA905 Detector [BIM-6602A: Parameter Specifications]: Hamamatsu S11639, Line-Array CMOS Detector Pixel [BIM-6602A: Parameter Specifications]: 2048 Pixels, Each Pixel 14μm×200μm
The BIM-6602A series spectrometer uses a high-resolution optomechanical structure in a compact, portable design, with resolution as fine as 0.08 nm. Interchangeable gratings adjust optical resolution and spectral range. Upgraded circuitry provides a 10000:1 dynamic range, minimum integration time of 0.5 milliseconds, and 600:1 signal-to-noise ratio for weak-signal detection. RS232 communication and improved interference resistance make it ideal for industrial and scientific applications.
Related Articles
Fomoptic delivers integrated one‑stop optical solutions covering precision optical fabrication and custom vacuum coating services. Supported by complete processing production lines, comprehensive metrology equipment and experienced engineering team, we provide full‑chain customized components, ranging from blank shaping, ultra‑precision polishing to thin‑film coating, for laser systems, infrared imaging, industrial optics and scientific‑research projects.
A solid-state laser is one of the most common and reliable laser types used in modern industry, medical equipment, and scientific research. Unlike gas or fiber lasers, it uses solid materials as its gain medium to generate stable, high-brightness laser beams. Thanks to its high precision, long lifespan, and compact structure, solid-state lasers have become a mainstream solution for high-precision laser processing and optical systems.
In photonics and laser technology, devices that manipulate optical signals via the electro-optic effect form the backbone of precision optical systems. Electro-optic phase modulators and electro-optic deflectors are two prominent examples of this device category. As a critical hardware solution for high-speed, high-accuracy laser beam direction control, electro-optic deflectors are widely deployed across industrial and research settings. Below is a detailed overview of their core structure, key performance drivers, and primary use cases.
In UV laser testing, UV spectroscopy and lithography optical experiments, excessive light intensity will lead to detector saturation, optical component damage and overexposed imaging.
Loading...
Name
Phone
Organization
Use Case
Database Platform