Manual film-laminating machine TM806
Save to Favorites
Specifications
| Parameter | Value |
|---|---|
| Applicable dimensions | 3-6 inch |
| Applicable ring specifications | MODTF2-6 special customization available |
| Wafer thickness | 150-800μm |
| Applicable film | Blue film, UV film |
| Applicable film thickness | 0.05-0.2mm |
| Applicable film width | ≤300mm |
| Film-material outer diameter | ≤200mm |
| Heating temperature range | Room temperature–80℃ |
| Dimensions | 740 mm × 385 mm × 290 mm |
| Weight | 50kg |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
MDS1560
Semiconductor Packaging Equipment
Cctc
Recommended medium: All media, from aqueous solutions to solder paste Striker type: All Weimisi monolithic ceramic or carbide tappets Dispensing volume [Single pulse, depending on medium type; Original uppercase NL retained as in the source]: <1.0 NL
-
MDS3010/3020+
Semiconductor Packaging Equipment
Cctc
Recommended fluid: Low-viscosity water-like liquids, UV adhesives, instant adhesives, anaerobic adhesives; medium-viscosity organic solvents, fluxes, greases and lubricants Striker type: Monolithic ceramic, metal carbide, various shapes Nozzle type: Various shapes, materials and orifice diameters
-
MDS3250+
Semiconductor Packaging Equipment
Cctc
Recommended fluid: LED phosphors, SMT adhesives (including conductive adhesives containing hard particles), silicone resins, underfills, hot-melt adhesives, solder paste, etc. Striker type: Monolithic ceramic, metal carbide, different shapes Dispensing volume [Minimum, depending on fluid type]: 0.8 nanoliters single point
-
MDS3280
Semiconductor Packaging Equipment
Cctc
-
Industrial Packaging Inspection System
Semiconductor Packaging Equipment
Tera-aurora
Detection Method: Inline Real-Time Detection Detection Accuracy: ≥99.9 % Inspection Layout: Dual-Side Detection Imaging
Detects/Identifies Products inside Sealed Boxes on Industrial Packaging Lines.
Related Articles
In photonics and laser technology, devices that manipulate optical signals via the electro-optic effect form the backbone of precision optical systems. Electro-optic phase modulators and electro-optic deflectors are two prominent examples of this device category. As a critical hardware solution for high-speed, high-accuracy laser beam direction control, electro-optic deflectors are widely deployed across industrial and research settings. Below is a detailed overview of their core structure, key performance drivers, and primary use cases.
GYOPTICS 30 W collimated isolator is a highly‑reliable passive optical component optimized for 1064 nm high‑power laser systems. Characterized by low insertion loss and superior backward‑light suppression capability, it effectively blocks reflected light traveling back toward the laser resonator, eliminating back‑reflection‑induced instability and protecting fiber or solid‑state laser sources during long‑term operation.
For 1D optical detection scenarios such as spectrum acquisition, dimensional measurement and optical scanning, area array CMOS/CCD suffer redundant pixels, high cost and slow row readout speed.
Laser pump sources are the core energy input component of solid-state lasers and laser amplifiers, and their performance directly determines the output power, beam quality and service life of the entire laser system. In scenarios such as industrial processing, scientific research experiments and high-end equipment, improper pump source selection will not only result in substandard system performance, but also bring a series of problems such as rapid device degradation and high operation and maintenance costs. This article sorts out the core selection logic and key pitfalls of pump source procurement, and provides selection references based on mature, mass-produced high-reliability products to help purchasers efficiently screen suitable products.
Loading...
Name
Phone
Organization
Use Case
Database Platform