BIM-5001 ±15V current-limited power supply
The BIM-5001 current-limited supply mainly powers optical receivers and amplifiers, but also serves general laboratories. Two ±15V output ports use European-imported Pico micro connectors that completely shield external noise sources to reduce electrical interference. Three outputs use banana sockets for other laboratory equipment. All three outputs have independent current limiting to prevent damage. If a load exceeds the specified current limit, its voltage drops rapidly, reducing available power and protecting the supply and connected equipment.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Output Voltage | ±15V±3% |
| Ripple [rms] | < 1 mV(rms) |
| Recovery Time | < 100μs |
| Temperature coefficient | < 300ppm/℃ |
| Output Current | <0.3A / <0.1A |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
PMC2 laser control card
Laser Diode Drivers
Central-laser
Interface [Model=PMC2]: PCI Companion software [Model=PMC2]: MarkingMate Product Dimensions [Model=PMC2]: 160 mm × 102 mm
PMC2 laser-control card with a PCI interface, for use with MarkingMate software.
-
PMC2e laser control card
Laser Diode Drivers
Central-laser
Interface [Model=PMC2e]: PCIe Companion software [Model=PMC2e]: MarkingMate Scan head transmission specifications [16Bit scan head]: XY2-100
PMC2e laser-control card with a PCIe interface, for use with MarkingMate software.
-
PMC6 laser control card
Laser Diode Drivers
Central-laser
Interface [Model=PMC6]: PCIe Companion software [Model=PMC6]: MarkingMate Supported engraving head resolution [Model=PMC6]: 16、18、20
PMC6 laser-control card with a PCIe interface, for use with MarkingMate software.
-
MC3 laser control card
Laser Diode Drivers
Central-laser
Product Dimensions [Product=MC3 laser control card]: 133 mm × 115 mm Operating System [Product=MC3 laser control card]: Windows 98/2000/XP Windows 7 Computer Interface [Product=MC3 laser control card; Notebook, desktop and industrial computers]: USB port
MC3 is an advanced USB laser-marking controller using a genuine DSP processing chip and a dual-buffer architecture. Widely used for dynamic on-the-fly and rotary-axis marking, with conveyor operation, digital/analog galvanometer control, and XY Table control. Its strong performance suits high-end laser marking and marking-system development.
-
Custom Laser Driver Power Supply
Laser Diode Drivers
Crystrong
Pulsed Laser Seed Source Drive - Current: ≥3A Pulsed Laser Seed Source Drive - Pulse Edges: ＜1ns Pulsed Laser Seed Source Drive - Pulse Width [Other Ranges Customizable]: 1ns-25ns (Other Ranges Customizable)
Pulsed/CW Laser Seed Drivers;Four-in-One LD Driver;Complete LD Pulsed Supply
Related Articles
Laser pump sources are the core energy input component of solid-state lasers and laser amplifiers, and their performance directly determines the output power, beam quality and service life of the entire laser system. In scenarios such as industrial processing, scientific research experiments and high-end equipment, improper pump source selection will not only result in substandard system performance, but also bring a series of problems such as rapid device degradation and high operation and maintenance costs. This article sorts out the core selection logic and key pitfalls of pump source procurement, and provides selection references based on mature, mass-produced high-reliability products to help purchasers efficiently screen suitable products.
Shandong Haucore Optoelectronics Co., Ltd. introduces the HGLD‑792‑COS‑D‑10WB semiconductor laser within its COS series. Delivering an output power of 10 W at a central wavelength of 792 nm, this device adopts gold‑tin bonding COS packaging. Featuring high reliability and long service life, it serves as a preferred pump source for solid‑state lasers and is widely deployed in industrial processing, laser display, medical & aesthetic treatment, scientific research and other fields.
Fomoptic delivers integrated one‑stop optical solutions covering precision optical fabrication and custom vacuum coating services. Supported by complete processing production lines, comprehensive metrology equipment and experienced engineering team, we provide full‑chain customized components, ranging from blank shaping, ultra‑precision polishing to thin‑film coating, for laser systems, infrared imaging, industrial optics and scientific‑research projects.
Fiber lasers and fiber amplification systems require excitation sources with stable wavelength, narrow spectral linewidth and consistent output power.
Loading...
Name
Phone
Organization
Use Case
Database Platform