WS-30LT series building-type optical transmitters WS-30LT30xx
This independently developed and manufactured building-type directly modulated optical transmitter is small and lightweight, with a compact, convenient modular structure, high cost-effectiveness, stability and reliability. It includes an RF test port and can add optical ports for signal insertion. It is ideal for CATV1310nm/1550nm signal transmission, secondary network construction, and fiber-to-the-building (FTTB) and fiber-to-the-home (FTTH) deployment.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Output Optical Power | 2–30 mW |
| Optical Wavelength | 1310±20 nm |
| Maximum received-light range [Original label in the limit-parameter table retained] | 1310±20 nm |
| Maximum input optical power [Original label in the limit-parameter table retained] | 2–30 mW |
| Laser Type | DFB laser |
| Broadcast-insertion optical-input range [Original order] | +2 to −7 dBm |
| Optical modulation method | Direct optical intensity modulation |
| Optical-connector form [Customizable to Customer Requirements] | SC/APC or FC/APC |
| Frequency Range [Customizable to 1000MHz] | 47–862 MHz |
| RF input level [Recommended optimum value 80dBuV] | 65–85 dBuV |
| RF test-port level [Relative to the input-port level] | −10 dBuV |
| In-band flatness | ±1 dB |
| Monitor-port level [Relative to the input port] | −10 dBuV |
| Manual level-adjustment range | 0–18 dB |
| RF input impedance | 75 Ω |
| Input return loss [No unit listed in the original table] | ≥16 |
| C/CTB [No unit listed in the original table] | ≥65 |
| C/CSO [No unit listed in the original table] | ≥60 |
| Carrier-to-noise ratio [No unit listed in the original table] | ≥51 |
| Equipment operating temperature | −5 to +45 ℃ |
| Equipment Dimensions [No dimensional unit listed in the original table] | 39×155×238 |
| Weight | 885 g |
| Minimum input level [Limit-parameter table; Recommended optimum value 80dBuV; Test port −10dBuV (relative to the input-port level)] | 65–85 dBuV |
| Limit operating temperature [Limiting Parameters Table] | −5 to +45 ℃ |
Key Features
Datasheet
Supplier Information
Related Products
-
10G 1310nm 10KM Dual-Fiber Industrial-Grade 10PIN Surface-Mount Fully Domestically Sourced Miniature Optical Module
Transmitters and Receivers
Fiberwdm
Module Specifications - Storage Temperature TSTG: min:-55 ℃; max:+85 ℃ Module Specifications - Soldering Temperature TSOLD: max:+260 ℃ Module Specifications - Welding Time tSOLD: max:5 s
RS-10G10-31-10DI is an ultrashort dual-fiber bidirectional optical transceiver with transmitter/receiver in a small metal enclosure for greater EMI resistance. A high-power LD transmitter uses CML TD+/TD- signals. The receiver includes a PIN, transimpedance preamplifier and limiting amplifier, with CML RD+/RD- outputs and standard LVTTL signal-detect SD. Transmit-enable TDIS allows power-saving mode. Pins/mounting dimensions are fully compatible with comparable STRATOS products; function pins, mounting and outline dimensions are customizable. Rigorous military-grade screening and environmental tests ensure reliability/adaptability, including vibration/EMI resistance, damp-heat resistance and broad temperature tolerance for airborne, shipboard and high-altitude environments. Compact, lightweight all-metal construction is only 12mm high for confined boards/chassis.
-
50G QSFP+ ER4 40Km 1310nm LC Optical Transceiver RQ-50G-LR4
Transmitters and Receivers
Fiberwdm
Data Rate [Order information]: 50 Gb/s Wavelength [Order information]: 1310nm Reach [Order information]: 40 km
50G QSFP ER4 optical transceiver module, support 50Gb/s and up to 40 km transmission on SM fiber, it works in high-speed IDC connection solutions, 5G network mid-haul solution, and so on.
-
50G QSFP+ ER4 40Km 1310nm LC Optical Transceiver RQ-50G-LR4-I
Transmitters and Receivers
Fiberwdm
Data Rate [Order information]: 50 Gb/s Wavelength [Order information]: 1310nm Reach [Order information]: 40 km
50G QSFP ER4 optical transceiver module, support 50Gb/s and up to 40 km transmission on SM fiber, it works in high-speed IDC connection solutions, 5G network mid-haul solution, and so on.
-
100G QSFP28 SR4 100m 850nm MPO Optical Transceiver RQ-100G-SR4
Transmitters and Receivers
Fiberwdm
Storage Temperature Range TSTG: min:-40 ⁰C; max:+85 ⁰C Supply Voltage VCC: min:0 V; max:4 V Relative Humidity RH: 5%to 85% non-condensing
100G QSFP28 SR4 100m 850nm MPO Optical Transceiver，support 100Gb/s and up to 100m transmission on MM fiber, it works in high-speed IDC connection solutions and so on. FIBERWDM’s 100G QSFP28 SR4 is a 4×25Gbps multi mode fiber, hot pluggable optical transceiver. The module integrates four parallel lanes with data rate at 25.78Gbps each lane. It can transmit up to 70 m on fiber OM3 fiber or 100 m on OM4 fiber with FEC.
-
SNAP12-Series Parallel Optical Transceiver Module RSN12R-3GM-85-I
Transmitters and Receivers
Fiberwdm
Number of Channels: 12 Receive Channels Package Form: SNAP12 Operating Wavelength: 850nm
SNAP12-series parallel optical transceiver modules mainly support very-short-distance high-speed data communication and parallel interconnects in optical backplanes, server/storage-array connections and radar processors. They offer low electromagnetic radiation and strong interference resistance. Dimensions comply with SNAP12 MSA. Interfaces are a pluggable 10×10Pin electrical connector and a standard pluggable MPO optical connector. The ambient operating range is -40 to 85℃, with per-channel rates of 1.25–10.3125Gbps.
Related Articles
On January 21, 2026, SPIE Photonics West, one of the world’s leading photonics events, was held in San Francisco, USA. RaySea presented its latest self‑developed VCSEL achievements at this prestigious exhibition. Dr. Lai, the company’s senior R&D representative, delivered a technical speech during the dedicated VCSEL session. His presentation covered cutting‑edge progress of in‑house multi‑junction VCSEL solutions built for automotive lidar and embodied‑intelligence robots, drawing strong attention from the global photonics community.
Shandong Haucore Optoelectronics Co., Ltd. introduces the HGLD‑792‑COS‑D‑10WB semiconductor laser within its COS series. Delivering an output power of 10 W at a central wavelength of 792 nm, this device adopts gold‑tin bonding COS packaging. Featuring high reliability and long service life, it serves as a preferred pump source for solid‑state lasers and is widely deployed in industrial processing, laser display, medical & aesthetic treatment, scientific research and other fields.
Founded in 2019, Jilin JC Ultrafast Equipment Co., Ltd. is a high-tech enterprise incubated by the Ultrafast Optoelectronics Center of Jilin University. Our R&D team owns 15 years of profound experience in femtosecond laser micro-nano fabrication.
Recently, our R&D crew carried‑out performance tests on domestically‑made third‑party LiDAR hardware. The original built‑in sensor chip was replaced by Optics‑Valley Quantum’s new‑generation D‑XXLA200‑02 chip.
Loading...
Name
Phone
Organization
Use Case
Database Platform