Benchtop Fiber Amplifier
The benchtop optical fiber amplifier provides low-noise C-band signal output at high or ultra-high power. The EDFA uses highly stable pump lasers, comprehensive control, monitoring and protection circuits, and a good ventilation and heat-dissipation design to ensure long pump laser life and highly reliable operation. The rear panel provides an RS232 communications interface for configuring operating parameters through host software, and an AC220V power input. The front-panel LCD displays operating parameters and alarms. All optical ports are on the front panel for convenient use. Cost-effective and widely applicable, the benchtop optical fiber amplifier is used for fiber transmission of image, voice and data carrier signals in cable television, communications and security monitoring systems.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Operating Wavelength | min:1535 nm; typical:1550 nm; max:1565 nm |
| Number of Channels | typical:1 |
| Input/Output Fiber Type | SMF-28 |
| Input/output fiber-connector type | FC/APC |
| Module dimensions [(W×L×H)] | 260 mm × 320 mm × 120 mm |
| Operating Mode | ACC (default)/APC |
| ACC-mode current-setting accuracy | max:±5% |
| Input/output isolation | min:30 dB |
| SMSR [@Pin=0dBm，25℃,1550nm] | min:40 dB |
| Input power | min:-10 dBm; typical:0 dBm; max:10 dBm |
| Maximum output optical power | max:37 dBm |
| Extinction Ratio [This item applies only to polarization-maintaining products @Pin=0dBm, 25℃] | min:20 dB |
| Noise Figure [This item applies only to polarization-maintaining products @Pin=0dBm, 25℃] | max:5 dB |
| Supply Voltage | min:174 V; typical:220 V; max:260 V |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
100G 1310nm SOA Optical Amplifier Board
Fiber Optic Amplifiers
Fiberwdm
Wavelength Range [Page Model FWSOA14B]: 1290nm ~ 1330nm Input Power Range per Channel [Page Model FWSOA14B]: -20dBm ~ +6dBm Output Power Range per Channel [Page Model FWSOA14B]: -6dBm ~ +10dBm
FIBERWDM瑞东100G1310nm SOA Board for O-Band Amplification,Gain Band1290–1330nm,up toTwo Signals/Card,Information Security/Data Transmission,etc.
-
DWDM (1550nm) EDFA Fiber Amplifier
Fiber Optic Amplifiers
Fiberwdm
Operating Wavelength Range [Power Amplifier (BA)]: min:1529 nm; typical:1550 nm; max:1564 nm Input Optical Power [Power Amplifier (BA)]: min:-15 dBm; max:5 dBm Gain [Power Amplifier (BA)]: min:14 dB; typical:25 dB; max:33 dB
This high-stability-output EDFA uses a reliable pump laser with APC (automatic power control) and ATC (automatic temperature control) for stable power/reliability. Distinctive optics provide excellent optical metrics; a stable, precise MPU gives convenient intelligent adjustment/display. Digital-fiber-communications optics offer lower noise figure, high-output power amplification and the stated low-sensitivity preamplification to improve link budget, plus broad input range and field-adjustable output. Mixed/hot-swappable dual supplies increase MTBF and back up equipment-room power. Intelligent cooling starts strong fans above 45℃ and stops them below 40℃ for thermal stability/fan life; professional airflow improves temperature stability. Intelligent monitoring uses open RS232, RS485 and Ethernet interfaces for network-management interoperability; Ethernet supports the stated national-standard SNMP. Hot-swappable agents avoid disrupting operation. The final software-upgrade statement is cut off after 升.
-
EDFA Optical Amplifier Board
Fiber Optic Amplifiers
Fiberwdm
Wavelength Range: Standard1529nm~1561nm for40-Wave100GHz or80-Wave50GHz DWDM Wavelength Range: Extended1528nm~1568nm for48-Wave100GHz or96-Wave50GHz DWDM Input Power Range: BA:-19~+6dBm;LA:-30~-5dBm;PA:-30~-5dBm
The EDFA amplifier board is an optical-amplification module developed by FIBERWDM瑞东科技 for long-distance digital fiber communication. Its core is a pump laser described by the unclear source term 高可囊性. Distinctive ATC (automatic temperature control) and ACC (constant pump-current control) circuits provide stable output and good reliability. A specially designed GFF (gain-flattening filter) and optimized optical path improve flatness and what the source calls acoustic absorption (吸声), with APC (automatic power control) and AGC (automatic gain control).
-
100G 1310nm SOA Fiber Amplifier
Fiber Optic Amplifiers
Fiberwdm
Operating Wavelength Range: 1280nm ~ 1330nm Input Optical Power Range (Total Power): -17dBm ~ -4dBm Output Optical Power Range (Total Power): 2dBm ~ 10dBm
100G1310nm SOA Fiber-Amplifier Platform for Weak High-Speed Signals,Hot-Swappable Card,Highly Integrated/Low Power/Stable Output,Link Amplification/Extended Reach.
-
1550nm SOA Optical Pulse Modulation Module FWBT515G25-SWSOA-2
Fiber Optic Amplifiers
Fiberwdm
Operating Wavelength: typical:1550 nm Input Optical Power: min:-30 dBm; typical:0 dBm; max:5 dBm Output Optical Power: min:-5 dBm; max:10 dBm
广州市瑞东Email 科技限公司's externally triggered narrow-pulse modulation module uses a semiconductor electro-optic switch as the core converter. SMA modulation input drives an internal circuit controlling the switch. Fast rise time, high extinction, stability and easy operation suit fiber sensing as an alternative to traditional electro-optic/acousto-optic modulation. Listed1550nm SOA module specifications:2–100ns pulses,input-30 to5dBm,output-5 to10dBm,5V,FC/APC,0.9MM fiber of0.5M length,and90×38.5×15mm module size.
Related Articles
The accelerated construction of new‑generation power systems has brought revolutionary upgrades to power‑equipment maintenance workflows.
Driven by fast‑growing demands of 3D perception, biometric authentication and machine‑vision industries, near‑infrared imaging optics have become a vital hardware component for intelligent sensing systems.
icrolight is a high-tech enterprise specializing in the R&D, manufacturing and sales of active and passive photonic devices for microwave photonics, LiDAR ranging, gas sensing, fiber optics and photomedicine.
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
Loading...
Name
Phone
Organization
Use Case
Database Platform