AB Adhesive
A white, high-purity (99.98%) alumina polishing powder that mixes very easily with water without clumping, suitable for polishing special materials to meet high-quality surface requirements in precision optics. 1. Bonding surfaces should be dry and clean, free of dust, oil, and other contamination. Sandpaper may be used to roughen the bonding surfaces for optimum adhesion. 2. Mix the adhesive components at a ratio of 82/8267=1:1. The mixed adhesive is ready for use when its color changes from orange-red to green. 3. Hardening should take place in a curing oven; please refer to the following for the specific hardening temperature and time: At room temperature, the unmixed material has a shelf life of approximately 2 years. One 8266A 70 g tube and one 8267B 60 g tube per box. 8266A/8267B are also supplied in one-kilogram pails each.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Specific Gravity [82 A] | 1.08kg/1 |
| Specific Gravity [8267B] | 0.98kg/1 |
| Base material [82 A] | Epoxy resin |
| Base material [8267B] | Alkali |
| Consistency [82 A] | Gel-like |
| Consistency [8267B] | Gel-like |
| Viscosity at 25℃ [82 A；25℃] | 150-3 mPas |
| Colors [82 A] | Red |
| Colors [8267B] | Yellow |
| Solvent [82 A] | Acetone |
| Solvent [8267B] | Acetone |
| Curing time [82/8267=1:1；50℃] | 4hours |
| Curing time [82/8267=1:1；75℃] | 2hours |
| Curing time [82/8267=1:1；1℃] | 1hours |
| Curing time [82/8267=1:1；125℃] | 30minutes |
| Curing time [82/8267=1:1；150℃] | 15minutes |
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
DIP Smart Accelerated Traffic-Capture Network Card: High-Performance Capture Solution Based on an FPGA Programmable Network Card FW-uNIC720
Tools and Kits
Fiberwdm
Key Features: Zero-Loss Packet Capture for All Frame Sizes; Line-Rate Packet Transmission for All Frame Sizes; Nanosecond-Precision Timestamps; Packet Slicing, Deduplication and Other Preprocessing; Large Onboard Memory Buffer Ensures Packet Transmission during Congestion; Multiport Traffic with the Same Source and Destination Is Delivered to X86 Multicore Queues Network Interface: 2/4 *10GE/GE（SFP+）；2*100GE/40GE(QSFP28/QSFP+) Host Queue: 16 Queues; Multiport Traffic with the Same Source and Destination Is Load-Balanced across Queues
FPGA-specific network hardware acceleration, Linux programmability,100G traffic offload and OVS offload. FPGA advances enable a combined hardware/software high-performance traffic-capture solution replacing standard-NIC DPDK+Hyperscan. Lower memory I/O and CPU use support line-rate packet capture and selected service offloads,with API-based subsequent processing. It enables dense traffic-analysis computation on standard servers,especially domestic hardware platforms. The supplied final sentence stops after describing relatively low full-traffic acquisition performance and insufficient stability on domestic platforms.
-
DIP Smart Accelerated Traffic-Capture Network Card: High-Performance Capture Solution Based on an FPGA Programmable Network Card FW-uNIC740
Tools and Kits
Fiberwdm
Key Features: Zero-Loss Packet Capture for All Frame Sizes; Line-Rate Packet Transmission for All Frame Sizes; Nanosecond-Precision Timestamps; Packet Slicing, Deduplication and Other Preprocessing; Large Onboard Memory Buffer Ensures Packet Transmission during Congestion; Multiport Traffic with the Same Source and Destination Is Delivered to X86 Multicore Queues Network Interface: 2/4 *10GE/GE（SFP+）；2*100GE/40GE(QSFP28/QSFP+) Host Queue: 16 Queues; Multiport Traffic with the Same Source and Destination Is Load-Balanced across Queues
FPGA-specific network hardware acceleration, Linux programmability,100G traffic offload and OVS offload. FPGA advances enable a combined hardware/software high-performance traffic-capture solution replacing standard-NIC DPDK+Hyperscan. Lower memory I/O and CPU use support line-rate packet capture and selected service offloads,with API-based subsequent processing. It enables dense traffic-analysis computation on standard servers,especially domestic hardware platforms. The supplied final sentence stops after describing relatively low full-traffic acquisition performance and insufficient stability on domestic platforms.
-
DIP Smart Accelerated Traffic-Capture Network Card: High-Performance Capture Solution Based on an FPGA Programmable Network Card FW-uNIC920
Tools and Kits
Fiberwdm
Key Features: Zero-Loss Packet Capture for All Frame Sizes; Line-Rate Packet Transmission for All Frame Sizes; Nanosecond-Precision Timestamps; Packet Slicing, Deduplication and Other Preprocessing; Large Onboard Memory Buffer Ensures Packet Transmission during Congestion; Multiport Traffic with the Same Source and Destination Is Delivered to X86 Multicore Queues Network Interface: 2/4 *10GE/GE（SFP+）；2*100GE/40GE(QSFP28/QSFP+) Host Queue: 16 Queues; Multiport Traffic with the Same Source and Destination Is Load-Balanced across Queues
FPGA-specific network hardware acceleration, Linux programmability,100G traffic offload and OVS offload. FPGA advances enable a combined hardware/software high-performance traffic-capture solution replacing standard-NIC DPDK+Hyperscan. Lower memory I/O and CPU use support line-rate packet capture and selected service offloads,with API-based subsequent processing. It enables dense traffic-analysis computation on standard servers,especially domestic hardware platforms. The supplied final sentence stops after describing relatively low full-traffic acquisition performance and insufficient stability on domestic platforms.
-
DIP Smart Accelerated Traffic-Capture Network Card: High-Performance Capture Solution Based on an FPGA Programmable Network Card FW-uNIC1044
Tools and Kits
Fiberwdm
Key Features: Zero-Loss Packet Capture for All Frame Sizes; Line-Rate Packet Transmission for All Frame Sizes; Nanosecond-Precision Timestamps; Packet Slicing, Deduplication and Other Preprocessing; Large Onboard Memory Buffer Ensures Packet Transmission during Congestion; Multiport Traffic with the Same Source and Destination Is Delivered to X86 Multicore Queues Network Interface: 2/4 *10GE/GE（SFP+）；2*100GE/40GE(QSFP28/QSFP+) Host Queue: 16 Queues; Multiport Traffic with the Same Source and Destination Is Load-Balanced across Queues
FPGA-specific network hardware acceleration, Linux programmability,100G traffic offload and OVS offload. FPGA advances enable a combined hardware/software high-performance traffic-capture solution replacing standard-NIC DPDK+Hyperscan. Lower memory I/O and CPU use support line-rate packet capture and selected service offloads,with API-based subsequent processing. It enables dense traffic-analysis computation on standard servers,especially domestic hardware platforms. The supplied final sentence stops after describing relatively low full-traffic acquisition performance and insufficient stability on domestic platforms.
-
DIP Smart Accelerated Traffic-Capture Network Card: High-Performance Capture Solution Based on an FPGA Programmable Network Card FW-uNIC1020P
Tools and Kits
Fiberwdm
Key Features: Zero-Loss Packet Capture for All Frame Sizes; Line-Rate Packet Transmission for All Frame Sizes; Nanosecond-Precision Timestamps; Packet Slicing, Deduplication and Other Preprocessing; Large Onboard Memory Buffer Ensures Packet Transmission during Congestion; Multiport Traffic with the Same Source and Destination Is Delivered to X86 Multicore Queues Network Interface: 2/4 *10GE/GE（SFP+）；2*100GE/40GE(QSFP28/QSFP+) Host Queue: 16 Queues; Multiport Traffic with the Same Source and Destination Is Load-Balanced across Queues
FPGA-specific network hardware acceleration, Linux programmability,100G traffic offload and OVS offload. FPGA advances enable a combined hardware/software high-performance traffic-capture solution replacing standard-NIC DPDK+Hyperscan. Lower memory I/O and CPU use support line-rate packet capture and selected service offloads,with API-based subsequent processing. It enables dense traffic-analysis computation on standard servers,especially domestic hardware platforms. The supplied final sentence stops after describing relatively low full-traffic acquisition performance and insufficient stability on domestic platforms.
Related Articles
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
As fundamental refractive optical components, plano‑convex spherical lenses consist of one convex spherical surface and one flat surface.
FiDAR, the fiber‑optic radar vehicle positioning and tracking system developed by Jianhe Bafang, is a high‑sensitivity distributed fiber‑sensing solution designed for intelligent traffic road monitoring. It outputs real‑time spatial coordinates of every vehicle across the full road section around‑the‑clock, delivering a brand‑new sensing technology for vehicle‑road cooperation, smart highway construction and urban traffic management.
Raybowlaser, a professional manufacturer of high-power laser chips, has officially launched its upgraded new-generation 1470nm high-performance laser chip. Achieving groundbreaking progress in rated output power and wall-plug efficiency (WPE), this innovative laser chip delivers superior and reliable core light source solutions for medical cosmetology, industrial processing, agricultural applications and scientific research equipment.
Loading...
Name
Phone
Organization
Use Case
Database Platform