Signal Send Module 1550nm SSM-55-5-11111-EEEEE-1
Optizone Signal Send Module
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Center Wavelength [Device without connector] | 1550 nm |
| Operating Wavelength Range [Device without connector] | ±5 nm |
| Extinction Ratio at 23℃ (From Port 1、2、3、4 to Port 5) [Device without connector] | min:30 dB |
| Insertion Loss at 23℃ (Free Space to Fiber, Only for Port 1、2、3、4 @Slow Axis) [Device without connector] | max:4.2 dB |
| Insertion Loss at 23℃ (From Port 1、2、3、4 to Port 5 @ Proper SOP) [Device without connector] | 44±9 % |
| Alignment Tolerance [Device without connector; 45deg between1/2 and3/4] | max:±2 deg |
| Alignment Tolerance [Device without connector; 45deg between1/2 and3/4] | typical:±1 deg |
| Nominal Output Beam Diameter(1/e^2) [Device without connector; Measurement distance20mm] | 0.45 mm |
| Divergence Angle (Full Angle) [Device without connector] | max:4.5 mrad |
| Pointing Uniformity(From Port 1、2、3、4 to Free Space) [Device without connector] | max:0.35 mrad |
| Return Loss [Device without connector] | min:50 dB |
| Optical Power (CW, Total) [Device without connector] | max:100 mW |
| Tensile Load [Device without connector] | max:5 N |
| Fiber Type [Device without connector] | Port 5：Corning SMF-28e Fiber Other Ports: PM1550 Fiber |
| Operating Temperature [Device without connector] | -5 to + 50 |
| Storage Temperature [Device without connector] | -40 to +85 ℃ |
| Insertion Loss increment [Device with connectors; relative to connectorless specification] | 0.3 dB |
| Return Loss reduction [Device with connectors; relative to connectorless specification] | 5 dB |
| Extinction Ratio reduction [Device with connectors; relative to connectorless specification] | 2 dB |
| PM fiber and connector key alignment | slow axis |
| Tap Port Alignment Type [Printed P/N5] | SMF-28e on Tap Port |
| Connector Type [Printed P/N11111] | FC/UPC on all ports |
| Fiber Jacket [Printed P/N EEEEE] | 2mm Blue Loose Tube on all ports |
| Fiber Length [Printed P/N] | 1.0 m |
| BS Crystal and Lens Material | JGS1 |
Applications
Key Features
Datasheet
Supplier Information
Related Products
-
10G 1310nm 10KM Dual-Fiber Industrial-Grade 10PIN Surface-Mount Fully Domestically Sourced Miniature Optical Module
Transmitters and Receivers
Fiberwdm
Module Specifications - Storage Temperature TSTG: min:-55 ℃; max:+85 ℃ Module Specifications - Soldering Temperature TSOLD: max:+260 ℃ Module Specifications - Welding Time tSOLD: max:5 s
RS-10G10-31-10DI is an ultrashort dual-fiber bidirectional optical transceiver with transmitter/receiver in a small metal enclosure for greater EMI resistance. A high-power LD transmitter uses CML TD+/TD- signals. The receiver includes a PIN, transimpedance preamplifier and limiting amplifier, with CML RD+/RD- outputs and standard LVTTL signal-detect SD. Transmit-enable TDIS allows power-saving mode. Pins/mounting dimensions are fully compatible with comparable STRATOS products; function pins, mounting and outline dimensions are customizable. Rigorous military-grade screening and environmental tests ensure reliability/adaptability, including vibration/EMI resistance, damp-heat resistance and broad temperature tolerance for airborne, shipboard and high-altitude environments. Compact, lightweight all-metal construction is only 12mm high for confined boards/chassis.
-
50G QSFP+ ER4 40Km 1310nm LC Optical Transceiver RQ-50G-LR4
Transmitters and Receivers
Fiberwdm
Data Rate [Order information]: 50 Gb/s Wavelength [Order information]: 1310nm Reach [Order information]: 40 km
50G QSFP ER4 optical transceiver module, support 50Gb/s and up to 40 km transmission on SM fiber, it works in high-speed IDC connection solutions, 5G network mid-haul solution, and so on.
-
50G QSFP+ ER4 40Km 1310nm LC Optical Transceiver RQ-50G-LR4-I
Transmitters and Receivers
Fiberwdm
Data Rate [Order information]: 50 Gb/s Wavelength [Order information]: 1310nm Reach [Order information]: 40 km
50G QSFP ER4 optical transceiver module, support 50Gb/s and up to 40 km transmission on SM fiber, it works in high-speed IDC connection solutions, 5G network mid-haul solution, and so on.
-
100G QSFP28 SR4 100m 850nm MPO Optical Transceiver RQ-100G-SR4
Transmitters and Receivers
Fiberwdm
Storage Temperature Range TSTG: min:-40 ⁰C; max:+85 ⁰C Supply Voltage VCC: min:0 V; max:4 V Relative Humidity RH: 5%to 85% non-condensing
100G QSFP28 SR4 100m 850nm MPO Optical Transceiver，support 100Gb/s and up to 100m transmission on MM fiber, it works in high-speed IDC connection solutions and so on. FIBERWDM’s 100G QSFP28 SR4 is a 4×25Gbps multi mode fiber, hot pluggable optical transceiver. The module integrates four parallel lanes with data rate at 25.78Gbps each lane. It can transmit up to 70 m on fiber OM3 fiber or 100 m on OM4 fiber with FEC.
-
SNAP12-Series Parallel Optical Transceiver Module RSN12R-3GM-85-I
Transmitters and Receivers
Fiberwdm
Number of Channels: 12 Receive Channels Package Form: SNAP12 Operating Wavelength: 850nm
SNAP12-series parallel optical transceiver modules mainly support very-short-distance high-speed data communication and parallel interconnects in optical backplanes, server/storage-array connections and radar processors. They offer low electromagnetic radiation and strong interference resistance. Dimensions comply with SNAP12 MSA. Interfaces are a pluggable 10×10Pin electrical connector and a standard pluggable MPO optical connector. The ambient operating range is -40 to 85℃, with per-channel rates of 1.25–10.3125Gbps.
Related Articles
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
As fundamental refractive optical components, plano‑convex spherical lenses consist of one convex spherical surface and one flat surface.
FiDAR, the fiber‑optic radar vehicle positioning and tracking system developed by Jianhe Bafang, is a high‑sensitivity distributed fiber‑sensing solution designed for intelligent traffic road monitoring. It outputs real‑time spatial coordinates of every vehicle across the full road section around‑the‑clock, delivering a brand‑new sensing technology for vehicle‑road cooperation, smart highway construction and urban traffic management.
Raybowlaser, a professional manufacturer of high-power laser chips, has officially launched its upgraded new-generation 1470nm high-performance laser chip. Achieving groundbreaking progress in rated output power and wall-plug efficiency (WPE), this innovative laser chip delivers superior and reliable core light source solutions for medical cosmetology, industrial processing, agricultural applications and scientific research equipment.
Loading...
Name
Phone
Organization
Use Case
Database Platform