TDLAS Controller PCI-1D

Device Under Test: 14-Pin Butterfly Laser Laser Fixture Type: S Type, N Type, Custom Type Communication Interface: RS232

The HYTS-LD series multichannel driver is specifically designed for butterfly lasers. Its excellent stability enables precise drive current, cooling current, and other key parameters. Precision circuit control maintains constant temperature, voltage, and current for optimum laser performance. LD drive current reaches 2500mA, covering drive wavelengths of 800~1700nm. Its stable structure, mature manufacturing process, convenient use, high integration, and volume-production capability suit demanding application environments.

Safety Features: Interlock,Key-Lock Switch,Laser-Current Limit,Soft Start,Short Circuit when Laser Is Off,Laser Overvoltage Protection Display: 4.3" LCD TFT,480 x272 Pixels Benchtop Power Supply, Line Voltage, Line Frequency: 100 - 240 V ±10%, 47 - 63 Hz

The STEM595 is a compact benchtop instrument combining a semiconductor-laser power supply and TEC controller with a simple user interface. Its 1.5A current accommodates any G&H 14-pin DFB or single-mode laser. The 3A thermoelectric cooler operates at ambient temperature, and excellent temperature control enables precise frequency control. The STEM595 sets a new level of low-noise and linewidth performance; users seeking further improvement can consider the STEM750 and STEM650. USB 2.0 interface: complies with USBTMC/USBTMC-USB488 version1.0. Interface protocol:SCPI commands. Supplied drivers:VISA VXI pnp™, MS Visual Studio™, MS Visual Studio.net™, LabVIEW™, LabWindows/CVI™. Laser, module, NTC, and TE sockets:compatible with type1 butterfly (pump) and type2 butterfly (telecom) packages. Modulation-input connector:SMA. Interlock and laser-on signal connector:2.5 mm mono jack. USB connector:USB Mini-B. External-ground connector:4 mm banana socket. TEC current output:TEC current limit.

Output Current [Pulsed]: 0~1.6A Pulse Maximum Compliance Voltage: Single Laser Diode Current Noise: <3%

This picosecond high-speed semiconductor laser supply is described as the world's fastest seed-source driver, for picosecond lasers, DVD control, and printing. Output0-1.6A meets short-pulse single-mode diode requirements; an input trigger generates pulses from<500ps to 5ns. Current pulse-width input:RS232. Current-setting input:RS232. TEC setting:RS232. Measured 560ps pulse result.

Board Supply Voltage: 5VDC+-5% (Powered Directly from the LD Interface, from the Temperature-Control Board through the6-Pin IDC Interconnect, or by a Separate5V Supply) Board Supply Current: 0.1A PWM Frequency: 0.04-500kHz

The semiconductor-laser driver control board supports one semiconductor-laser (LD) power-driver board made by the company. In addition to setting and displaying current and controlling current output, it supports external analog current control and optional connection of 1 company-made temperature-control board. Combined with an LD driver board and a temperature-control board, it forms a complete semiconductor-laser power-supply system. The display board is easy to integrate and can be mounted directly in a panel as small as 2U. Supported LD driver boards: the company's STXF series. Supported temperature-control boards: the company's STXF series. Ordering information: semiconductor-laser power-driver control board, model STXF-CDM/-P. The -P suffix specifies a black panel; omit the suffix for the version without a panel. Examples: STXF-CDM, STXF-CDM-P. Dimensional drawing. User guide. Connection is simple: directly connect this board to the LD driver board through their 6PIN interfaces, pin to corresponding pin.

Type I Power Supply-Voltage [Adjustable (potentiometer)]: 0.5V-4V可调（电位计） Type I Power Supply-Current: 1.5A Type II Power Supply-Voltage [Adjustable (potentiometer)]: 0.5V-4V可调（电位计）

The multichannel digitally controlled laser power supply has 5 output channels: 2 controlled by a computer and 3 controlled by potentiometers.