Semiconductor Laser Control Board
Redwave Labs Laser Control Board Integrated current and temperature control integration ， is Maximum 250mA It's... Drive Electricity ， Applicable to categories DFB/ICL Semiconductor Laser ，TEC Controls can be built in. PI Ring or external signal ， Temperature control is completely linear 。C154，C150，C151 and C190 It's got a butterfly-shaped setup. ， Application of different quotation definitions 14pin Fluttershy Laser ，C158 Applicable to TO Encapsulated Laser 。 Configure Parameters Dimensions Specifications Application area
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Electricity / Double | +12 V, 2 A or +12 V/0.5A and +5V/1.5A; -12 V, 0.5 A |
| Laser Electricity control / Laser Electricity | 0 – 250mA。 Changes to custom versions |
| Laser Electricity control / Compliance Voltage | > 4.0 V |
| Laser Electricity control / Set Precision | 2 % fs |
| Laser Electricity control / RMS Noise | < 2µA |
| Laser Electricity control / Offset | < 20 µA |
| Laser Electricity control / Temperature coefficient | 50 ppm/C |
| Laser Electricity control / Electricity limit | 250 mA |
| Laser External control / Pressure range | 0-10V |
| Laser External control / Input Impedance | 10 kOhm |
| Laser External control / Modifier | 20 mA/V |
| Laser External control / 3dB Bandwidth | DC-250 kHz |
| Laser External control / TTL Modulation ， Up / Fall Time | 250 ns |
| Laser External control / Interlock Functions | Existing |
| TEC Control / TEC Electricity | ± 1.0 A /1.5 A |
| TEC Control / TEC Electricity | > 8.0 V |
| TEC Control / Maximum Output Power | 12 W |
| TEC Control / Maximum Electricity | 1 A or 1.5 A |
| TEC Control / Enter sensitive widgets | Hot-sensitive electrical resistance. 10 kOhm or 100 kOhm at 25℃ |
| TEC Control / PID Control | Internal PI Control or external direct TEC Electricity control |
| Connection / Laser | Different types 14pin Fluttershy Laser ， With heaters |
| Connection / Power Supply | Molex MicroFit 8 pin. |
| Connection / Control | Molex MicroFit 12 pin. |
| Basic Configuration / Dimensions （ Long x Kwang x High ） | 120 mm × 92 mm × 30 mm |
| Basic Configuration / Weight | 350 g |
| Basic Configuration / Storage Temperature | -55 to 100 C |
| Basic Configuration / Operating Temperature | -40 to 85 C |
Applications
Datasheet
Supplier Information
Related Products
-
HYTS-LD Series Multichannel Driver Laser Diode Drivers Unistarcom
Device Under Test: 14-Pin Butterfly Laser Laser Fixture Type: S Type, N Type, Custom Type Communication Interface: RS232
The HYTS-LD series multichannel driver is specifically designed for butterfly lasers. Its excellent stability enables precise drive current, cooling current, and other key parameters. Precision circuit control maintains constant temperature, voltage, and current for optimum laser performance. LD drive current reaches 2500mA, covering drive wavelengths of 800~1700nm. Its stable structure, mature manufacturing process, convenient use, high integration, and volume-production capability suit demanding application environments.
-
Benchtop Laser Power Supply STEM595 Laser Diode Drivers Sinteclaser
Safety Features: Interlock,Key-Lock Switch,Laser-Current Limit,Soft Start,Short Circuit when Laser Is Off,Laser Overvoltage Protection Display: 4.3" LCD TFT,480 x272 Pixels Benchtop Power Supply, Line Voltage, Line Frequency: 100 - 240 V ±10%, 47 - 63 Hz
The STEM595 is a compact benchtop instrument combining a semiconductor-laser power supply and TEC controller with a simple user interface. Its 1.5A current accommodates any G&H 14-pin DFB or single-mode laser. The 3A thermoelectric cooler operates at ambient temperature, and excellent temperature control enables precise frequency control. The STEM595 sets a new level of low-noise and linewidth performance; users seeking further improvement can consider the STEM750 and STEM650. USB 2.0 interface: complies with USBTMC/USBTMC-USB488 version1.0. Interface protocol:SCPI commands. Supplied drivers:VISA VXI pnp™, MS Visual Studio™, MS Visual Studio.net™, LabVIEW™, LabWindows/CVI™. Laser, module, NTC, and TE sockets:compatible with type1 butterfly (pump) and type2 butterfly (telecom) packages. Modulation-input connector:SMA. Interlock and laser-on signal connector:2.5 mm mono jack. USB connector:USB Mini-B. External-ground connector:4 mm banana socket. TEC current output:TEC current limit.
-
Picosecond High-Speed Semiconductor Laser Power Supply
Laser Diode Drivers
Sinteclaser
Output Current [Pulsed]: 0~1.6A Pulse Maximum Compliance Voltage: Single Laser Diode Current Noise: <3%
This picosecond high-speed semiconductor laser supply is described as the world's fastest seed-source driver, for picosecond lasers, DVD control, and printing. Output0-1.6A meets short-pulse single-mode diode requirements; an input trigger generates pulses from<500ps to 5ns. Current pulse-width input:RS232. Current-setting input:RS232. TEC setting:RS232. Measured 560ps pulse result.
-
Semiconductor Laser Control Module Laser Diode Drivers Sinteclaser
Board Supply Voltage: 5VDC+-5% (Powered Directly from the LD Interface, from the Temperature-Control Board through the6-Pin IDC Interconnect, or by a Separate5V Supply) Board Supply Current: 0.1A PWM Frequency: 0.04-500kHz
The semiconductor-laser driver control board supports one semiconductor-laser (LD) power-driver board made by the company. In addition to setting and displaying current and controlling current output, it supports external analog current control and optional connection of 1 company-made temperature-control board. Combined with an LD driver board and a temperature-control board, it forms a complete semiconductor-laser power-supply system. The display board is easy to integrate and can be mounted directly in a panel as small as 2U. Supported LD driver boards: the company's STXF series. Supported temperature-control boards: the company's STXF series. Ordering information: semiconductor-laser power-driver control board, model STXF-CDM/-P. The -P suffix specifies a black panel; omit the suffix for the version without a panel. Examples: STXF-CDM, STXF-CDM-P. Dimensional drawing. User guide. Connection is simple: directly connect this board to the LD driver board through their 6PIN interfaces, pin to corresponding pin.
-
Multichannel Digitally Controlled Laser Power Supply Laser Diode Drivers Lighteek
Type I Power Supply-Voltage [Adjustable (potentiometer)]: 0.5V-4V可调（电位计） Type I Power Supply-Current: 1.5A Type II Power Supply-Voltage [Adjustable (potentiometer)]: 0.5V-4V可调（电位计）
The multichannel digitally controlled laser power supply has 5 output channels: 2 controlled by a computer and 3 controlled by potentiometers.
Related Articles
The LZFL405‑80mW‑3 series from Shenzhen Leirte Optoelectronics Co., Ltd. is a coaxial‑packaged violet‑blue single‑mode fiber‑coupled laser diode. It delivers 80 mW continuous‑wave output at 405 nm. Light is coupled into 3 μm core‑diameter single‑mode fiber for clean beam quality and easy integration into diverse optical systems. It serves as a compact violet‑blue light source for medical instruments and industrial printing applications.
Macro channel water-cooled stacked laser diodes integrate dozens of laser bars into one vertical stacked module with large-diameter macro flow cooling channels.
CytoViva delivers comprehensive hyperspectral imaging solutions covering visible to near-infrared spectrum, compatible with brightfield, fluorescence and proprietary enhanced darkfield microscopy modes.
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
Loading...
Name
Phone
Organization
Use Case
Database Platform