PM2.5 Test
PM2.5 The detection equipment is mainly used to monitor air. PM2.5 Concentration of particulate matter ， So it's best to install where air quality monitoring is required. 。 Below is Some suitable for installation PM2.5 The location of the detection equipment. ： 1. Urban centre areas ： Because of the heavy traffic in urban centres 、 Higher building ，PM2.5 The emissions of particulate matter are larger ， So it's installed in the urban center area. PM2.5 Testing equipment allows for timely monitoring of air quality 。 2. Industrial areas ： Industrial regions usually have a lot of industrial emissions. ， Including coal combustion. 、 Chemical, etc. ， It causes the air to come. PM2.5 High particle concentration ， Therefore, installation in industrial areas PM2.5 Testing equipment to monitor the impact of industrial emissions on air quality 。 3. Construction sites ： Construction sites is An important source ， And it's creating dust and particles. ， Impact on surrounding air quality 。 And so... ， Installation around construction sites PM2.5 Testing equipment to monitor the impact of site construction on air quality 。 4. Transportation hub ： Transportation hub is One of the main sources of transport emissions, such as car exhausts ， Therefore Installing Near Transport Hubs PM2.5 Testing equipment to monitor the impact of traffic emissions on surrounding air quality 。 5. Business and residential areas ： Business and residential areas is Population-intensive places ， Air quality has a greater impact on the health of the population ， So they're installed in the commercial and residential areas. PM2.5 Testing equipment allows for timely monitoring of air quality ， Health care for the population 。 Overall ，PM2.5 Testing equipment suitable for installation where air quality monitoring is required ， Like urban center areas 、 Industrial areas 、 Construction sites 、 Transportation hub 、 Business and residential areas, etc. ， To monitor air quality in a timely manner ， Public health protection 。
Save to Favorites
Overview
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
PS-2011 dual-channel Bluetooth interface Sensors Brolight
Interface Type: USB or Bluetooth 2.0 Interface: 4 (2 PASPORT interfaces, 1 voltage interface, 1 temperature interface)
The PS-2011 SPARKlink dual-channel Bluetooth interface lets teachers and students connect their devices by USB or Bluetooth to any of more than 70 PASPORT sensors in the PASCO range. Data are acquired with SPARKvue or PASCO Capstone. Teachers and students can use desktop or laptop computers running either program, or Bluetooth-enabled iOS or Android devices running the SPARKvue app. Note: SPARKlink Air connects to Google Chromebooks by USB but does not support Bluetooth connection to them.
-
Gas mass flow controllers-3660 series Sensors Csl-vacuum
Flow-rate range [Different flow units at the two ends retained as in the source, without conversion]: 10SCCM~100SLM Gas/fluid: N2, AIR, H2, HE, AR, O2, CO2, etc. Electrical connection: Dsub 9-pin
An internal sensor measures gas flow in real time and compares it with the setpoint. The controller rapidly actuates a regulating valve, forming a closed loop that stabilizes actual flow precisely at the target.
-
Gas mass flow controllers FC-R7700CD series Sensors Csl-vacuum
Flow-rate range [Different flow units at the two ends retained as in the source, without conversion]: 10SCCM~200SLM Gas/fluid: N2, AIR, H2, HE, AR, O2, CO2, etc. Electrical connection: Dsub 9-pin
An internal sensor measures gas flow in real time and compares it with the setpoint. The controller rapidly actuates a regulating valve, forming a closed loop that stabilizes actual flow precisely at the target.
-
Fully integrated 4-channel DVS optical module Sensors Oe-photonics
Sensing distance: typical:20 km Number of detection channels: 4 channels Modulation mode: External modulation
For multichannel, fully integrated distributed vibration sensing (DVS), the DVS-AOM-L series uses an ultra-narrow-linewidth laser with optimized optomechanical/electrical integration. Serial-port parameter configuration, high integration, environmental-interference resistance, compact size, and convenience are provided. Sharing a narrow-linewidth laser reduces multichannel costs, particularly for demanding sensing applications. Custom solutions and specifications are available to sensor-equipment manufacturers.
-
Ceramic pressure sensor Sensors Cctc
Ceramic parts for pressure sensors.
Related Articles
Fomoptic delivers integrated one‑stop optical solutions covering precision optical fabrication and custom vacuum coating services. Supported by complete processing production lines, comprehensive metrology equipment and experienced engineering team, we provide full‑chain customized components, ranging from blank shaping, ultra‑precision polishing to thin‑film coating, for laser systems, infrared imaging, industrial optics and scientific‑research projects.
A solid-state laser is one of the most common and reliable laser types used in modern industry, medical equipment, and scientific research. Unlike gas or fiber lasers, it uses solid materials as its gain medium to generate stable, high-brightness laser beams. Thanks to its high precision, long lifespan, and compact structure, solid-state lasers have become a mainstream solution for high-precision laser processing and optical systems.
In photonics and laser technology, devices that manipulate optical signals via the electro-optic effect form the backbone of precision optical systems. Electro-optic phase modulators and electro-optic deflectors are two prominent examples of this device category. As a critical hardware solution for high-speed, high-accuracy laser beam direction control, electro-optic deflectors are widely deployed across industrial and research settings. Below is a detailed overview of their core structure, key performance drivers, and primary use cases.
In UV laser testing, UV spectroscopy and lithography optical experiments, excessive light intensity will lead to detector saturation, optical component damage and overexposed imaging.
Loading...
Name
Phone
Organization
Use Case
Database Platform