H435 Weight Treatment Tester
H435 installation/maintenance integrated tester inventories resources and diagnoses link loss/weak signals from a splitter toward ONU subscribers. It also performs intelligent diagnosis from the optical modem or ahead of the secondary/primary splitter toward the OLT equipment room. Functions include expert OTDR, optical power meter,10G wavelength-selective measurement, visible-red light, stable source and RJ45 testing.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Test the range of the pulses available [Expert OTDR ' s actual independent statement; different ranges, different wiring options] | 3～20000 ns |
| Test Mode [Expert's factual independent statement by OTDR] | Automatic/real-time test/average test |
| Incidents are losing range. [Expert's factual independent statement by OTDR] | 0.2～30 dB |
| Default for event loss door limit [Expert's factual independent statement by OTDR] | 0.2 dB |
| Reaction door limit range [Expert's factual independent statement by OTDR] | 10～60 dB |
| Reflect door limit default [Expert's factual independent statement by OTDR] | 40 dB |
| End of gate limit [Expert's factual independent statement by OTDR] | 1～30 dB |
| End door limit default [Expert's factual independent statement by OTDR] | 10 dB |
| Sample precision [Expert OTDR ' s actual independent statement; time extension for high-precision model measurements] | Standard/High Precision |
| And measure the wavelength. [Independent statement of 10G split wave power meter] | 1490/1577 |
| Output Mode [Independent statement of visual red light] | CW/1Hz/2Hz |
| Output wavelength [Independent statement of stable light sources] | Same wavelength as OTDR output |
| Modifier Frequency [Independent statement of stable light sources] | CW/270/330/1000/2000Hz |
| TWINS [Stable light source independent statement; matching the current light power meter TWINS] | Supported |
| Search for Lines [Original description digital searcher] | Simulate search lines/digit search lines |
| Direct current voltage with electrical searcher equipment [Weak electrical equipment such as ethnet switches, routers; not applicable line sequence/long] | Less than 60 |
| Line Test [No electric tests.] | 8 core line sequence; measuring to connect remote modules |
| Long Test [No electrical tests. Pull out the other end of the line before the tests.] | Supported |
| Auto-activate Time [Independent System Settings Notes] | 5/15/30/45/60 |
| Backlight [Independent System Settings Notes] | 20/40/60/80/100 |
Applications
Datasheet
Supplier Information
Related Products
-
25G PON OLT optical transceiver Optical Receiver Equipment Cnsunstar
Form Factor [Explicit row in the parameter image: 25G PON OLT Symmetric]: SFP28 Data Rate [Explicit row in the parameter image: 25G PON OLT Symmetric; Original dual-rate order retained]: 25/25 Tx WL [Explicit row in the parameter image: 25G PON OLT Symmetric]: 1358 nm
PON OLT & ONU Transceiver Solutions
-
25G PON ONU Optical Receiver Equipment Cnsunstar
Form Factor [Explicit row in the parameter image: 25G PON ONU SFP28]: SFP28 Data Rate [Explicit row in the parameter image: 25G PON ONU SFP28; Original dual-rate order retained]: 25/25 Tx WL [Explicit row in the parameter image: 25G PON ONU SFP28]: 1286 nm
PON OLT & ONU Transceiver Solutions
-
XGS PON Combo ONU OSA Optical Receiver Equipment Cnsunstar
-
GPON 2.5G 1490nm TX/1.25G 1310nm RX Class C+ SFP Transceiver Optical Receiver Equipment Sont-tech
Distance: 20 km Data Rate [Source dual-rate wording retained, without inferring Tx/Rx from the sequence]: max:1.25Gb/s; 2.5G/S
The GPBS-43G3-20C is a point to multi point (P2MP) Fiber to the Home, Business or Curb (FTTX) GPON OLT transceiver. It is designed for 2488Mb/s downstream / 1244Mb/s upstream duplex data links that employ high-speed burst mode TDM receivers/transmitters. It is based on the ITU-T G.984.2 Class C+ specifications for bidirectional communications over a single fiber and incorporates a high performance 1310nm Burst Mode APD/TIA receiver and 1490nm CW mode DFB transmitter with internal optical isolator. The Burst Signal Detect (Butst_SD), the Burst Mode Receiver Reset (Rx_RESET), Transmit Disable (Tx_DIS), Transmit Fault (Tx_FAULT) and the SFF-8472 I2C diagnostic interface monitor and control functions are LVTTL compatible. The industry standard 2x10 small form pluggable (SFP) package incorporat
-
GPON 2.5G 1490nm TX/1.25G 1310nm RX Class C++ SFP Transceiver Optical Receiver Equipment Sont-tech
Distance: 20 km Data Rate [Source dual-rate wording retained, without inferring Tx/Rx from the sequence]: max:1.25Gb/s; 2.5Gb/S
The GPBS-43G3-20C+ is a point to multi point (P2MP) Fiber to the Home, Business or Curb (FTTX) GPON OLT transceiver. It is designed for 2488Mb/s downstream / 1244Mb/s upstream duplex data links that employ high-speed burst mode TDM receivers/transmitters. It is based on the ITU-T G.984.2 Class C++ specifications for bidirectional communications over a single fiber and incorporates a high performance 1310nm Burst Mode APD/TIA receiver and 1490nm CW mode DFB transmitter with internal optical isolator. The Burst Signal Detect (Butst_SD), the Burst Mode Receiver Reset (Rx_RESET), Transmit Disable (Tx_DIS), Transmit Fault (Tx_FAULT) and the SFF-8472 I2C diagnostic interface monitor and control functions are LVTTL compatible. The industry standard 2x10 small form pluggable (SFP) package incorpor
Related Articles
The LZFL405‑80mW‑3 series from Shenzhen Leirte Optoelectronics Co., Ltd. is a coaxial‑packaged violet‑blue single‑mode fiber‑coupled laser diode. It delivers 80 mW continuous‑wave output at 405 nm. Light is coupled into 3 μm core‑diameter single‑mode fiber for clean beam quality and easy integration into diverse optical systems. It serves as a compact violet‑blue light source for medical instruments and industrial printing applications.
Wuhan Optics Valley Quantum Technology Co., Ltd. is a leading domestic developer of high‑speed semiconductor optical chips and photodetector components. Our product portfolio covers InGaAs avalanche photodiode bare dies and PIN photodetector chips designed for fiber‑optic communication
As a professional ultraviolet‑laser solution provider, Precilasers has launched its 266 nm narrow‑linewidth industrial laser, delivering reliable single‑frequency output for high‑precision interference lithography, semiconductor inspection and precision metrology applications.
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
Loading...
Name
Phone
Organization
Use Case
Database Platform