NK303C plug in to the damage tester
NK303C is an insertion/return-loss tester for optical-signal power measurement, stable laser output and insertion/return-loss testing. Its low-power single-chip processor and embedded detector support user calibration, frequency identification, four-level backlight and USB power.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Wavelength Range [Photometer] | 800～1700 nm |
| Light Connector [Photometer] | Universal Access FC/SC/ST |
| Connector Type [Photometer] | InGaAs |
| Power Measurement Range [Photopower meter;actual left-hand slot] | -70～+6 dBm |
| Power Measurement Range [Photometer;real right-hand slot] | -50～+26 dBm |
| Uncertainty [Photometer] | ±5 % |
| Calibrated Wavelength [Photometer] | 850/980/1300/1310/1490/1550/1625/1650 |
| Display Resolution [photopower meters; linear display] | 0.1 % |
| Display Resolution [photopower meter; logarithmic display] | 0.01 dBm |
| Identifiable Frequency [Photometer] | 270Hz/330Hz/1000Hz/2000Hz |
| Storage function [Photometer] | 1000 条 |
| Operating Wavelength [Stable Light] | 1310±20nm/1550±20nm |
| Laser type [Stable Light] | FP-LD |
| Spectral Width [Stable Light] | ≤5 nm |
| Output Power [Stable Light] | ≤-1 dBm |
| Stability [Stable Light] | ±0.05dB/30min |
| Light Connector [Stable Light] | FC/UPC |
| Operating Mode [Stable Light] | CW/270Hz/330Hz/1000Hz/2000Hz |
| Power reconciliation [Stable Light] | 0-6 dB, 1 dB step |
| Operating Wavelength [Visual breakdown positioning] | 650±30 nm |
| Output Power [Visual breakdown positioning] | ≥10 mW |
| Operating Mode [Visual breakdown positioning] | CW/1Hz/2Hz |
| Light Connector [Visual breakdown positioning] | Universal Access FC/SC/ST |
| Power Supply | 2400 mAh-charging lithium batteries |
| Auto-activate Time | 10 min |
| Battery duration of working hours | ≥12 h |
| Operating Temperature | -10～+50 ℃ |
| Storage Temperature | -40～+70 ℃ |
| Relative humidity [Noncondensing] | 0～95 % |
| Dimensions | 186 mm × 100 mm × 50 mm |
| Weight | 240 g |
| Measurement Wavelength [Revert loss test] | 1310±20nm/1550±20nm |
| Measurement Range [Revert loss test] | 0～70 dB |
| Accuracy [Revert loss test] | ±0.5 dB |
| Resolution [Revert loss test] | 0.01 dB |
| Light Connector [Revert loss test] | FC/APC |
| Measurement Wavelength [Insert Loss Test] | 1310±20nm/1550±20nm |
| Measurement Range [Insert Loss Test] | 0～70 dB |
| Accuracy [Insert Loss Test] | ±0.3 dB |
| Resolution [Insert Loss Test] | 0.01 dB |
| Light Connector [Insert Loss Test] | FC/APC |
Applications
Datasheet
Supplier Information
Related Products
-
BIM-7001 optical power meter Optical Power Meters Brolight
Compatible detectors: BIM-71 series photodetectors; BIM-72 series thermopile detectors Communication Interface: USB2.0 LCD type: 80×54mm LCD segment display
The BIM-7001 is a high-performance optical-power-meter readout suited to both laboratory and portable field testing. The BIM-7001 is compatible with digitally transmitting BIM-71 photodetector-series or BIM-72 thermopile-series detectors for real-time power display. The BIM-7001 has a large segmented LCD with intelligent backlighting and a fast, clear numerical display. The BIM-7001 also has 1 USB port for acquisition and display through dedicated BPM software, making it convenient to record and analyze optical-power changes in real time.
-
BIM-710xU USB photoelectric power meter BIM-7101U Optical Power Meters Brolight
Detector Material: Si Wavelength Range: 380nm-1100nm Power Measurement Range: ~ 10mW
The BIM-710xU series USB optical power meter offers UV-enhanced silicon, silicon, indium gallium arsenide (InGaAs), and other detectors selected for wavelength or application requirements. It covers 200nm to 1650nm, with optional OD1/OD2 attenuators to increase the power-measurement range. USB communication eliminates the need for an additional conventional readout: installing optical-power-meter software on a computer enables live acquisition, analysis, and power monitoring. A USB Hub also allows a system with up to 8 channels to acquire and display power from multiple light sources simultaneously.
-
BIM-710xU USB photoelectric power meter BIM-7102U Optical Power Meters Brolight
Detector Material: UV-Si Wavelength Range: 200nm-1100 nm Power Measurement Range: ~ 10mW
The BIM-710xU series USB optical power meter offers UV-enhanced silicon, silicon, indium gallium arsenide (InGaAs), and other detectors selected for wavelength or application requirements. It covers 200nm to 1650nm, with optional OD1/OD2 attenuators to increase the power-measurement range. USB communication eliminates the need for an additional conventional readout: installing optical-power-meter software on a computer enables live acquisition, analysis, and power monitoring. A USB Hub also allows a system with up to 8 channels to acquire and display power from multiple light sources simultaneously.
-
BIM-710xU USB photoelectric power meter BIM-7103U Optical Power Meters Brolight
Detector Material: InGaAs Wavelength Range: 800nm-1650nm Power Measurement Range: ~ 10mW
The BIM-710xU series USB optical power meter offers UV-enhanced silicon, silicon, indium gallium arsenide (InGaAs), and other detectors selected for wavelength or application requirements. It covers 200nm to 1650nm, with optional OD1/OD2 attenuators to increase the power-measurement range. USB communication eliminates the need for an additional conventional readout: installing optical-power-meter software on a computer enables live acquisition, analysis, and power monitoring. A USB Hub also allows a system with up to 8 channels to acquire and display power from multiple light sources simultaneously.
-
BIM-740xU series integrating-sphere power meters BIM-7401U-01 Optical Power Meters Brolight
Measurement power range: 1uW~1W Maximum Average Power Density: 1W/cm² Detector Material: Si silicon
The BIM-740xU series USB integrating-sphere power meter uses a 2-inch integrating sphere, with other sizes available on request, and integrates UV-enhanced silicon, silicon, indium gallium arsenide (InGaAs), or other detectors selected for wavelength and sensitivity requirements. It covers 200nm to 1650nm. The BIM-740xU series uses USB communication, eliminating the need for a conventional readout and connecting directly to a computer for optical-power measurement. A USB Hub can also form a system with up to 8 channels to acquire and display power from multiple light sources simultaneously.
Related Articles
The LZFL405‑80mW‑3 series from Shenzhen Leirte Optoelectronics Co., Ltd. is a coaxial‑packaged violet‑blue single‑mode fiber‑coupled laser diode. It delivers 80 mW continuous‑wave output at 405 nm. Light is coupled into 3 μm core‑diameter single‑mode fiber for clean beam quality and easy integration into diverse optical systems. It serves as a compact violet‑blue light source for medical instruments and industrial printing applications.
Wuhan Optics Valley Quantum Technology Co., Ltd. is a leading domestic developer of high‑speed semiconductor optical chips and photodetector components. Our product portfolio covers InGaAs avalanche photodiode bare dies and PIN photodetector chips designed for fiber‑optic communication
As a professional ultraviolet‑laser solution provider, Precilasers has launched its 266 nm narrow‑linewidth industrial laser, delivering reliable single‑frequency output for high‑precision interference lithography, semiconductor inspection and precision metrology applications.
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
Loading...
Name
Phone
Organization
Use Case
Database Platform