NK282 Axlx
The light-for-all watch series uses high-sensitivity detectors and single-swathe microprocessors, which can be switched to photopower meters and light-source interfaces to support RJ45 lines and flashlights, with red light, search lines and blue teeth depending on configuration.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Wavelength Range [Photometer] | 800～1700 nm |
| Light Connector [Photometer] | FC/SC |
| Detector Type [Photometer] | InGaAs |
| Power Measurement Range [Photopower meters;spect left] | -70～+10 dBm |
| Power Measurement Range [Photopower meter;to the right of the table] | -50～+26 dBm |
| Uncertainty [Photometer] | ±5 % |
| Standard Wavelength [Photometer] | 850/980/1270/1300/1310/1490/1550/1577/1625/1650 |
| Custom wavelength [Photometer] | 50 条 |
| Custom wavelength range [Photopower meter; independent statement] | 800～1700 nm |
| Display Resolution [photopower meters; linear display] | 0.1 % |
| Display Resolution [photopower meter; logarithmic display] | 0.01 dBm |
| Identifiable Frequency [Photometer] | 270Hz/330Hz/1kHz/2kHz |
| Wavelength recognition [Photometer] | Supported |
| Storage function [Photometer] | 1000 条 |
| User calibration range [Photopower meter; original indication unit not to be dB] | -6～+6 dBm |
| Threshold value addition step [Photopower meter; no express step units in the independent statement] | 0.01/0.1/1.0/10.0 |
| Output wavelength [Red light source (specified by series)] | 650±30 nm |
| Output Power [Red light source (specified by series)] | ≥10 mW |
| Output Mode [Red light source (specified by series)] | CW/1Hz/2Hz |
| Light Connector [Red light source (specified by series)] | Universal Access FC/SC/ST |
| Measurement Range [RJ45 Line] | ≤300 m |
| Measurement Range [RJ45 Search Line (Selection)] | ≤300 m |
| Search Line Mode [RJ45 Search Line (Selection)] | Digital Search Lines |
| Bringing a search wire. [RJ45 Search Line (Selection)] | Supported |
| Show | Black & White Break Screen Display |
| Power Supply | Lithium battery charged 1500 mAh |
| Auto-activate Time | 10/30/60/120 |
| Battery duration of working hours | ≥24 h |
| Operating Temperature | -10～+50 ℃ |
| Storage Temperature | -40～+70 ℃ |
| Relative humidity [Noncondensing] | 0～95 % |
| Weight | About 235 |
| Dimensions | 140 mm × 32 mm × 73 mm |
| Measurement Wavelength [Light source module for solar-for-all table stabilization; original two wavelengths, unpresumed or determined to be all available] | 850/1300±20nm；1310/1490/1550±20nm |
| Output Power [Light source module for table stabilization in light] | ≤-5 dBm |
| Power Adjustment Range [Light source module for table stabilization in light] | 0～6 dB |
| Power Adjustment Step [Light source module for table stabilization in light] | 1 dB |
| Operating Mode [Light source module for table stabilization in light] | CW/270Hz/330Hz/1kHz/2kHz/ID/TWINS |
| Stability [Light source module for table stabilization in light; 15 minutes after preheat; original table +, unmodified ±] | +0.2 dB/15min |
| Light Connector [Light source module for table stabilization in light] | FC/SC |
| TWINS Switch Wave Length [Light source module for solar-for-all table stabilization; by instrument type; independent statement] | 1310/1550nm or 850/1300nm |
Applications
Datasheet
Supplier Information
Related Products
-
BIM-7001 optical power meter Optical Power Meters Brolight
Compatible detectors: BIM-71 series photodetectors; BIM-72 series thermopile detectors Communication Interface: USB2.0 LCD type: 80×54mm LCD segment display
The BIM-7001 is a high-performance optical-power-meter readout suited to both laboratory and portable field testing. The BIM-7001 is compatible with digitally transmitting BIM-71 photodetector-series or BIM-72 thermopile-series detectors for real-time power display. The BIM-7001 has a large segmented LCD with intelligent backlighting and a fast, clear numerical display. The BIM-7001 also has 1 USB port for acquisition and display through dedicated BPM software, making it convenient to record and analyze optical-power changes in real time.
-
BIM-710xU USB photoelectric power meter BIM-7101U Optical Power Meters Brolight
Detector Material: Si Wavelength Range: 380nm-1100nm Power Measurement Range: ~ 10mW
The BIM-710xU series USB optical power meter offers UV-enhanced silicon, silicon, indium gallium arsenide (InGaAs), and other detectors selected for wavelength or application requirements. It covers 200nm to 1650nm, with optional OD1/OD2 attenuators to increase the power-measurement range. USB communication eliminates the need for an additional conventional readout: installing optical-power-meter software on a computer enables live acquisition, analysis, and power monitoring. A USB Hub also allows a system with up to 8 channels to acquire and display power from multiple light sources simultaneously.
-
BIM-710xU USB photoelectric power meter BIM-7102U Optical Power Meters Brolight
Detector Material: UV-Si Wavelength Range: 200nm-1100 nm Power Measurement Range: ~ 10mW
The BIM-710xU series USB optical power meter offers UV-enhanced silicon, silicon, indium gallium arsenide (InGaAs), and other detectors selected for wavelength or application requirements. It covers 200nm to 1650nm, with optional OD1/OD2 attenuators to increase the power-measurement range. USB communication eliminates the need for an additional conventional readout: installing optical-power-meter software on a computer enables live acquisition, analysis, and power monitoring. A USB Hub also allows a system with up to 8 channels to acquire and display power from multiple light sources simultaneously.
-
BIM-710xU USB photoelectric power meter BIM-7103U Optical Power Meters Brolight
Detector Material: InGaAs Wavelength Range: 800nm-1650nm Power Measurement Range: ~ 10mW
The BIM-710xU series USB optical power meter offers UV-enhanced silicon, silicon, indium gallium arsenide (InGaAs), and other detectors selected for wavelength or application requirements. It covers 200nm to 1650nm, with optional OD1/OD2 attenuators to increase the power-measurement range. USB communication eliminates the need for an additional conventional readout: installing optical-power-meter software on a computer enables live acquisition, analysis, and power monitoring. A USB Hub also allows a system with up to 8 channels to acquire and display power from multiple light sources simultaneously.
-
BIM-740xU series integrating-sphere power meters BIM-7401U-01 Optical Power Meters Brolight
Measurement power range: 1uW~1W Maximum Average Power Density: 1W/cm² Detector Material: Si silicon
The BIM-740xU series USB integrating-sphere power meter uses a 2-inch integrating sphere, with other sizes available on request, and integrates UV-enhanced silicon, silicon, indium gallium arsenide (InGaAs), or other detectors selected for wavelength and sensitivity requirements. It covers 200nm to 1650nm. The BIM-740xU series uses USB communication, eliminating the need for a conventional readout and connecting directly to a computer for optical-power measurement. A USB Hub can also form a system with up to 8 channels to acquire and display power from multiple light sources simultaneously.
Related Articles
The LZFL405‑80mW‑3 series from Shenzhen Leirte Optoelectronics Co., Ltd. is a coaxial‑packaged violet‑blue single‑mode fiber‑coupled laser diode. It delivers 80 mW continuous‑wave output at 405 nm. Light is coupled into 3 μm core‑diameter single‑mode fiber for clean beam quality and easy integration into diverse optical systems. It serves as a compact violet‑blue light source for medical instruments and industrial printing applications.
Wuhan Optics Valley Quantum Technology Co., Ltd. is a leading domestic developer of high‑speed semiconductor optical chips and photodetector components. Our product portfolio covers InGaAs avalanche photodiode bare dies and PIN photodetector chips designed for fiber‑optic communication
As a professional ultraviolet‑laser solution provider, Precilasers has launched its 266 nm narrow‑linewidth industrial laser, delivering reliable single‑frequency output for high‑precision interference lithography, semiconductor inspection and precision metrology applications.
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
Loading...
Name
Phone
Organization
Use Case
Database Platform