2 μm Fiber Pigtailed Photodiode
The 2 μm Fiber Pigtailed Photodiode is a coaxial package photoelectrical component. It features high responsivity, low dark current and good temperature performance over a wide wavelength range.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Center Wavelength λc | 2000 nm |
| Operating Wavelength Range | λc±40 |
| Min. Responsivity | 0.8 A/W |
| Min. Return Loss [Each connector added: return loss 5 dB lower.] | 40 dB |
| Max. Reverse Voltage VR | 1 V |
| Max. Input Power | 10 mW |
| Typical Bandwidth [RL=50 Ω；VR=0 V] | 90 MHz |
| Max. Dark Current [VR=0.5 V；70 °C] | 1 uA |
| Max. Capacitance [VR=0 V；f=1 MHz] | 50 pF |
| Fiber Type | SMF-28 Fiber |
| Operating Temperature | 0 to +70 °C |
| Storage Temperature | -40 to +85 °C |
| Soldering Temperature [Over 2 mm from head；less than 5 s] | ≤260 °C |
Applications
Key Features
Datasheet
Supplier Information
Related Products
-
200um MPD photodetector
Photodiodes
Mindsemi
-
250um MPD photodetector
Photodiodes
Mindsemi
-
4×25G PD Array
Photodiodes
Mindsemi
Product Rate: 25G
-
APD
Photodiodes
Mindsemi
-
Dual-channel APD photodetector for DTS (DTS-APD2)
Photodiodes
Oe-photonics
Operating Wavelength [APD]: min:900 nm; max:1700 nm Responsivity [APD]: typical:8.5 A/W; max:20 A/W Avalanche voltage V_BR [APD]: min:40 V; max:60 V
The DTS-APD2 integrates 2 groups of single-mode/multimode WDM and APD detectors for distributed fiber temperature sensing, separately detecting Stokes and Anti-Stokes signals. Built-in constant-temperature and constant-voltage control keeps APD chips stable, with low temperature drift and noise. Multistage amplification and noise suppression improve weak-signal output quality and system signal-to-noise ratio. A single DC+5V supply powers the module. Internal precision drive and logic circuits allow parameter configuration through a serial port and host software.
Related Articles
The ElFys PD25s series photodetectors adopt ElFys‑patented Black Silicon Induced Junction technology, delivering excellent spectral response spanning deep‑ultraviolet, visible and near‑infrared bands for diverse high‑precision photometry applications. Sub‑variants including H, M, HG and MG are optimised for low‑capacitance, low‑dark‑current and high‑reverse‑bias guard‑ring operations respectively. Multiple packaging configurations are available to satisfy various system‑design requirements.
Fomoptic delivers integrated one‑stop optical solutions covering precision optical fabrication and custom vacuum coating services. Supported by complete processing production lines, comprehensive metrology equipment and experienced engineering team, we provide full‑chain customized components, ranging from blank shaping, ultra‑precision polishing to thin‑film coating, for laser systems, infrared imaging, industrial optics and scientific‑research projects.
Wuhan Optical Valley Interlink Technology Co., Ltd. was founded in 2013 by a technical team from Huazhong University of Science and Technology.
For semiconductor, coating and laboratory vacuum chambers, thermal conductivity gauges suffer large measurement errors caused by gas type and ambient temperature.
Loading...
Name
Phone
Organization
Use Case
Database Platform