Air-classified four-way detector. QMJC-4-M-01
The following actions are automatically completed by manual placement of products to be tested in the retrofit: the self-depositor is automatically delivered to test sites for the test of gas-intensive testing of →Ok green lights and the NG red light. Agency configuration description: Seal is used for air-cylinder pressure, the work-heater is customised to the size of the product, the motor unit is driven by gas cylinder + straight-line guidance tracks, and the safety fence is installed.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Test Channel | Four Channels |
| Test Method | Direct pressure, negative pressure, volume, differential pressure |
| Test Resolution | 0.1 Pa |
| Test Scale | -80～2500KPa |
| Show units | Pa、KPa 、bar 、MPa 、psi 、mbar 、mmHg |
| Maximum set time | 3600 s |
| Pressure regulation | Mechanical voltage |
| Pressure regulation [(selection)] | Electronicly adjusted (select) |
| Sensor Precision [FS] | 0.1%FS |
| Historical data preservation | Supported |
| Maximum number of program combinations | 100 sets |
| Communication Interface | RS232 + RS485 |
| USB interface | 1 units |
| System Language | Chinese/English |
| MES | Supported |
| Use temperature | 0 °C ～50°C |
| Use Humidity [Non-condensing] | ≤80%, non-condensing |
| Test the gas source. [(clean, dry, compressed air)] | 0.4~0.8 MPa (clean, dry, compressed air) |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
BEM-5032A teslameter Measurement Devices Brolight
Measurement Range: 0-2000mT Accuracy: 0.1mT
The BEM-5032A teslameter measures magnetic flux density and is commonly used to assess fields from permanent magnets and electromagnetic sources. Principle: Based on the Hall effect. When current flows through a conducting material in a magnetic field, charges are deflected, producing a potential difference, the Hall voltage, across the material. Measuring this voltage determines magnetic-field strength.
-
BEX-8105 metal thermal expansion coefficient experiment apparatus Measurement Devices Brolight
Metal thermal-expansion-coefficient experimental apparatus - Input: Wide input voltage range 110~220V Metal thermal-expansion-coefficient experimental apparatus - Temperature-measurement module: Temperature measurement range from room temperature to 100℃ Metal thermal-expansion-coefficient experimental apparatus - Displacement-measurement module: Microdisplacement sensor measurement range 0-10.000mm
This teaching apparatus determines metal linear-expansion coefficients by heating copper, aluminum, and stainless-steel sample tubes with steam and directly measuring small elongations with a micrometer. It comprises a steam generator, metal sample tubes, temperature sensor, and small-displacement sensor. Small sample changes are measured dynamically during stable cooling, with 2 digital displays showing temperature and displacement in real time. Digital sensors can also record live displacement and temperature curves. Steam-based thermal-expansion measurement avoids scale buildup, pipe blockage, and leaks. An acrylic protective housing ensures safety. Displacement accuracy is 0.001mm. Three easily replaceable samples—aluminum, brass, and stainless steel—make experiments efficient and intuitive.
-
BEX-8503 electron charge-to-mass ratio experiment apparatus Measurement Devices Brolight
Adjustable voltage source Ⅱ - 2 voltage-output channels: 0~12VDC, 0~100VDC/0~200VDC Adjustable constant-current source, 0-3.5A - Current output: 0~3.5ADC Adjustable constant-current source, 0-3.5A - Voltage output: 6.3VAC
The central component of the electron charge-to-mass-ratio apparatus is a three-dimensional Wei'erni tube that visibly displays electron-beam trajectories. Place the tube in the field of Helmholtz coils and apply voltage to its electron gun to emit a beam for experimentation. The apparatus has a modular power supply, an easily replaceable tube, a highly uniform field, and an illuminated adjustable mirrored scale. CE certification supports safe, reliable operation.
-
Float flowmeters-RK1200 series Measurement Devices Csl-vacuum
Flow-rate range [Gas; Reference capacity list]: 0.5~5 ML / MIN to 10~100 L / MIN Flow-rate range [Fluid; Reference capacity list]: 0.5~5ML / MIN to 0.2~2 L / MIN Gas/fluid: Air, N2, O2, H2, He, Ar, CO2, etc.; H20
A float moves vertically in a tapered tube as flow changes. Its equilibrium height corresponds to a flow value for direct visual measurement.
-
MILESEEY GeneSonic Go Golf GPS Handheld Measurement Devices Mileseey
GPS: Built-in; no phone required Courses [preloaded full color course views]: 43000+ Display [source single-prime notation retained]: 3' full color touchscreen
Handheld GPS. Smarter Shot. GeneSonic Go gives clear, accurate yardages for 43,000+ courses with no subscriptions or complicated set up.
Related Articles
The LZFL405‑80mW‑3 series from Shenzhen Leirte Optoelectronics Co., Ltd. is a coaxial‑packaged violet‑blue single‑mode fiber‑coupled laser diode. It delivers 80 mW continuous‑wave output at 405 nm. Light is coupled into 3 μm core‑diameter single‑mode fiber for clean beam quality and easy integration into diverse optical systems. It serves as a compact violet‑blue light source for medical instruments and industrial printing applications.
Wuhan Optics Valley Quantum Technology Co., Ltd. is a leading domestic developer of high‑speed semiconductor optical chips and photodetector components. Our product portfolio covers InGaAs avalanche photodiode bare dies and PIN photodetector chips designed for fiber‑optic communication
As a professional ultraviolet‑laser solution provider, Precilasers has launched its 266 nm narrow‑linewidth industrial laser, delivering reliable single‑frequency output for high‑precision interference lithography, semiconductor inspection and precision metrology applications.
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
Loading...
Name
Phone
Organization
Use Case
Database Platform