PAD-JET3020S aerodynamic jet-jet valve
PAD-JET3020S is a pneumatic jet valve that applies adhesive without the Z-axis motion of conventional contact dispensing. It jets into gaps as small as 0.15mm, with minimum line width 0.25mm, minimum pad diameter 0.2mm and maximum frequency 280Hz. Minimum shot volume is 0.002ML; dispensing accuracy is 99% under identical pressure and temperature. It can match any commercially available dispensing platform.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Outer size (long × wide × high) [Table: PAD-JET3020S] | 114mm×67mm×63mm |
| Weight [Table: PAD-JET3020S] | 350 g |
| The material that exposed the agent. [Table: PAD-JET3020S] | SUS303 |
| The size of the adhesive entrance. [Table: PAD-JET3020S] | M5, Roar, hook-down. |
| Collapse Component [Table: PAD-JET3020S] | High-resistant grinding material |
| Nozzle component [Table: PAD-JET3020S] | High-resistant grinding material |
| Controlled temperature range [Table: PAD-JET3020S] | 20°C~80°C |
| Other O Circles [Table: PAD-JET3020S] | Corrosion resistant materials |
| Shell protection level [Table: PAD-JET3020S] | IP54 |
| Maximum running frequency [Table: PAD-JET3020S] | 280 Hz |
| Min. Driver Pressure [Table: PAD-JET3020S] | 0.55 MPa |
| Apply viscosity range [Table: PAD-JET3020S] | 0~100000 cps |
| Maximum permissible diameter of particulate matter in glue [Table: PAD-JET3020S] | 30 μm |
| Applicable ambient temperature [Table: PAD-JET3020S] | -20°C~65°C |
| A little bit of glue. [Table: PAD-JET3020S; at the same pressure and temperature] | 99% (with the same pressure and temperature) |
| Minimum Start Time [Table: PAD-JET3020S] | 1.6 ms |
| Minimum delay [Table: PAD-JET3020S] | 2.0 ms |
Applications
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
22MA PLUS Series (Bus) 22MAPLUS Automation and Control Syntecclub
Axis Count: 6 DA [Optional Specifications]: △ Inclined-Plane Machining [Optional Specifications]: △
22MA PLUS. 22MA PLUS Series controllers use Yaskawa bus communications to improve timing issues in multiaxis motion control with conventional pulse-based general-purpose controllers, providing good coordinated control and timely response.
-
22PLUS series lathe controllers (serial) 22TAPLUS Automation and Control Syntecclub
Axis Count: 4 DA [Optional Specifications]: △ Maximum I/O Count [RIO、M3IO]: 64/64 (RIO、M3IO)
22TA PLUS and 22TB PLUS. 22PLUS series controllers use Yaskawa serial communications to improve timing issues in multiaxis motion control with conventional pulse-based general-purpose controllers, providing good coordinated control and timely response.
-
PLC Optical Splitter Automation and Control Adfiber
1x4-Center Wavelength [The Specifications Above Exclude Connectors]: 1280 ~ 1650 1x4 - Insertion loss (dB) .* [The Specifications Above Exclude Connectors]: ≤ 7.3 dB 1x4 - Uniformity (dB) .* [The Specifications Above Exclude Connectors]: ≤ 1.0 dB
The planar lightwave circuit splitter (PLC Splitter) is an integrated-waveguide optical power distribution device on a quartz substrate. It offers small size, a wide operating wavelength range, high reliability and uniform splitting, particularly for connecting central-office and terminal equipment and splitting optical signals in passive optical networks such as EPON and GPON.
-
Vision alignment system Automation and Control Chinaddwy
-
MDS3200+
Automation and Control
Cctc
Recommended fluid: LED phosphors, SMT adhesives (including conductive adhesives containing hard particles), silicone resins, underfills, hot-melt adhesives, solder paste, etc. Striker type: Replaceable; different shapes; monolithic ceramic or metal carbide Dispensing volume [Minimum, depending on fluid type; Maximum single-dot precision can be controlled by an external independent pulse signal]: 1 nanoliters single point
Related Articles
The LZFL405‑80mW‑3 series from Shenzhen Leirte Optoelectronics Co., Ltd. is a coaxial‑packaged violet‑blue single‑mode fiber‑coupled laser diode. It delivers 80 mW continuous‑wave output at 405 nm. Light is coupled into 3 μm core‑diameter single‑mode fiber for clean beam quality and easy integration into diverse optical systems. It serves as a compact violet‑blue light source for medical instruments and industrial printing applications.
Wuhan Optics Valley Quantum Technology Co., Ltd. is a leading domestic developer of high‑speed semiconductor optical chips and photodetector components. Our product portfolio covers InGaAs avalanche photodiode bare dies and PIN photodetector chips designed for fiber‑optic communication
As a professional ultraviolet‑laser solution provider, Precilasers has launched its 266 nm narrow‑linewidth industrial laser, delivering reliable single‑frequency output for high‑precision interference lithography, semiconductor inspection and precision metrology applications.
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
Loading...
Name
Phone
Organization
Use Case
Database Platform