Medium- and High-Viscosity Adhesive Dispensing Machine RC3-441-BSV08-S
Precision three-axis-point-coated-coated-coated-polymers are loaded on a single-sole-point-based valve to achieve precise quantification of medium-high-coat glue; The operating system can be set at random for different path programs such as points, lines, circles. Maintenance is simple, cleaning is easy, applied widely, operating flexibly and operating steadily.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Work schedule (X/Y/Z) [Process Options] | 400*400*100mm (optional) |
| Maximum moving speed | 500 mm/s |
| Z Axis Load | 5 kg |
| Platform Load | 10 kg |
| Drive Method | The motor plus the roller-ball pole. |
| Control Method | Workheld computer + visual programming system |
| Program Storage | 999 sets |
| Positioning | CCD Visualisation |
| Visual-Presical-Presentity Needle Correction | |
| Laser altimeter | Optional |
| Repeatability | ±0.02 mm |
| A little bit of glue. [Under the same pressure and temperature conditions] | 95% (same pressure and temperature) |
| Minimal amount of glue | 0.01 ml |
| Operating rate | <300 /min |
| Feed/output | Rue's on the line. |
| Material supply mode | The pressure cans are glued. |
| Voltage Input | AC220V/50HZ |
| Input Gas | 0.4－0.7mpa |
| Point-Put-Put-Put-Put-Put-Pop controller | Precision Touch screen control system |
| Applicable material type | Silicon, grease, epoxy resin, yellow glue, dissipated aluminum, tin ointment, etc. |
| Apply material viscosity | 0-1000000 cps |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
MDS1560
Semiconductor Packaging Equipment
Cctc
Recommended medium: All media, from aqueous solutions to solder paste Striker type: All Weimisi monolithic ceramic or carbide tappets Dispensing volume [Single pulse, depending on medium type; Original uppercase NL retained as in the source]: <1.0 NL
-
MDS3010/3020+
Semiconductor Packaging Equipment
Cctc
Recommended fluid: Low-viscosity water-like liquids, UV adhesives, instant adhesives, anaerobic adhesives; medium-viscosity organic solvents, fluxes, greases and lubricants Striker type: Monolithic ceramic, metal carbide, various shapes Nozzle type: Various shapes, materials and orifice diameters
-
MDS3250+
Semiconductor Packaging Equipment
Cctc
Recommended fluid: LED phosphors, SMT adhesives (including conductive adhesives containing hard particles), silicone resins, underfills, hot-melt adhesives, solder paste, etc. Striker type: Monolithic ceramic, metal carbide, different shapes Dispensing volume [Minimum, depending on fluid type]: 0.8 nanoliters single point
-
MDS3280
Semiconductor Packaging Equipment
Cctc
-
Industrial Packaging Inspection System
Semiconductor Packaging Equipment
Tera-aurora
Detection Method: Inline Real-Time Detection Detection Accuracy: ≥99.9 % Inspection Layout: Dual-Side Detection Imaging
Detects/Identifies Products inside Sealed Boxes on Industrial Packaging Lines.
Related Articles
Laser pump sources are the core energy input component of solid-state lasers and laser amplifiers, and their performance directly determines the output power, beam quality and service life of the entire laser system. In scenarios such as industrial processing, scientific research experiments and high-end equipment, improper pump source selection will not only result in substandard system performance, but also bring a series of problems such as rapid device degradation and high operation and maintenance costs. This article sorts out the core selection logic and key pitfalls of pump source procurement, and provides selection references based on mature, mass-produced high-reliability products to help purchasers efficiently screen suitable products.
Shandong Haucore Optoelectronics Co., Ltd. introduces the HGLD‑792‑COS‑D‑10WB semiconductor laser within its COS series. Delivering an output power of 10 W at a central wavelength of 792 nm, this device adopts gold‑tin bonding COS packaging. Featuring high reliability and long service life, it serves as a preferred pump source for solid‑state lasers and is widely deployed in industrial processing, laser display, medical & aesthetic treatment, scientific research and other fields.
Fomoptic delivers integrated one‑stop optical solutions covering precision optical fabrication and custom vacuum coating services. Supported by complete processing production lines, comprehensive metrology equipment and experienced engineering team, we provide full‑chain customized components, ranging from blank shaping, ultra‑precision polishing to thin‑film coating, for laser systems, infrared imaging, industrial optics and scientific‑research projects.
Fiber lasers and fiber amplification systems require excitation sources with stable wavelength, narrow spectral linewidth and consistent output power.
Loading...
Name
Phone
Organization
Use Case
Database Platform