LEG Series Low-Profile Linear Guide LEGH25CA
Customers can select the appropriate accuracy according to their design requirements. Linear guides, also called linear rails or slide rails, are available as roller, cylindrical and ball linear guides. They are used for high-precision or high-speed reciprocating linear motion, can withstand a certain torque and can provide high-precision linear motion under heavy loads. The term used in mainland China is 'linear guide'; in Taiwan, 'linear guide' and 'linear slide rail' are commonly used.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Component Dimension H | 33 |
| Component Dimension H1 | 7 |
| Component size N | 12.5 |
| Slider Size W | 48 |
| Slider Size B | 35 |
| Slider Size B1 | 6.5 |
| Slider Size G | 12 |
| Slider Size MxL | M6X9 |
| Slider Size T | 8 |
| Slider Size H2 | 8 |
| Slider Size H3 | 8 |
| Rail Dimensions W_R | 23 |
| Rail Dimensions H_R | 18 |
| Track sizeh | 9 |
| Track Size P | 60 |
| Track Size E | 20 |
| Track weight [Size reference table: orbit weight column] | 2.67 kg/m |
| Slider Size C | 35 |
| Slider Size L1 | 59 |
| Slider Size L | 82.6 |
| Slider Size K1 | 16.15 |
| Basic Modified Quota C | 16.27 kN |
| Basic Quotas C0 | 32.40 kN |
| Permissible Static Moment W_R | 0.38 KN-m |
| Permissible Static Moment M_P | 0.32 KN-m |
| Permissible Static Moment M_Y | 0.32 KN-m |
| Slider Weight | 0.41 kg |
| Track Size D | 11 |
| Track sized d | 7 |
| The rail fixed bolt size. | M6X20 |
| Apologetic dimensions error at height H [Non-interchange direct line track; accuracy level: General (C); model size group: LEG-25,30] | ±0.1 mm |
| Acceptable size error for width N [Non-interchange direct line track; accuracy level: General (C); model size group: LEG-25,30] | ±0.1 mm |
| Mutual error in the form of a pair of Hs [Non-interchange direct line track; accuracy level: General (C); model size group: LEG-25,30] | 0.02 mm |
| Mutual error in pair width N [Non-interchange direct line track; accuracy level: General (C); model size group: LEG-25,30] | 0.03 mm |
| Apologetic dimensions error at height H [Non-interchange direct line track; accuracy level: advanced (H); model size group: LEG-25,30] | ±0.04 mm |
| Acceptable size error for width N [Non-interchange direct line track; accuracy level: advanced (H); model size group: LEG-25,30] | ±0.04 mm |
| Mutual error in the form of a pair of Hs [Non-interchange direct line track; accuracy level: advanced (H); model size group: LEG-25,30] | 0.015 mm |
| Mutual error in pair width N [Non-interchange direct line track; accuracy level: advanced (H); model size group: LEG-25,30] | 0.015 mm |
| Apologetic dimensions error at height H [Non-interchange direct line guidance; accuracy level: precision level (P); model size group: LEG-25,30] | 0 / -0.04 |
| Acceptable size error for width N [Non-interchange direct line guidance; accuracy level: precision level (P); model size group: LEG-25,30] | 0 / -0.04 |
| Mutual error in the form of a pair of Hs [Non-interchange direct line guidance; accuracy level: precision level (P); model size group: LEG-25,30] | 0.007 mm |
| Mutual error in pair width N [Non-interchange direct line guidance; accuracy level: precision level (P); model size group: LEG-25,30] | 0.007 mm |
| Apologetic dimensions error at height H [Non-interchange direct line guidance; accuracy level: super-precision (SP); model size group: LEG-25,30] | 0 / -0.02 |
| Acceptable size error for width N [Non-interchange direct line guidance; accuracy level: super-precision (SP); model size group: LEG-25,30] | 0 / -0.02 |
| Mutual error in the form of a pair of Hs [Non-interchange direct line guidance; accuracy level: super-precision (SP); model size group: LEG-25,30] | 0.005 mm |
| Mutual error in pair width N [Non-interchange direct line guidance; accuracy level: super-precision (SP); model size group: LEG-25,30] | 0.005 mm |
| Apologetic dimensions error at height H [Non-interchange direct line guidance; accuracy level: super-high precision (UP); model size group: LEG-25,30] | 0 / -0.01 |
| Acceptable size error for width N [Non-interchange direct line guidance; accuracy level: super-high precision (UP); model size group: LEG-25,30] | 0 / -0.01 |
| Mutual error in the form of a pair of Hs [Non-interchange direct line guidance; accuracy level: super-high precision (UP); model size group: LEG-25,30] | 0.003 mm |
| Mutual error in pair width N [Non-interchange direct line guidance; accuracy level: super-high precision (UP); model size group: LEG-25,30] | 0.003 mm |
| Apologetic dimensions error at height H [Interchanged straight line track; accuracy level: General level (C); model size group: LEG-25,30] | ±0.1 mm |
| Acceptable size error for width N [Interchanged straight line track; accuracy level: General level (C); model size group: LEG-25,30] | ±0.1 mm |
| Mutual error in the form of a pair of Hs [Interchanged straight line track; accuracy level: General level (C); model size group: LEG-25,30] | 0.02 mm |
| Mutual error in pair width N [Interchanged straight line track; accuracy level: General level (C); model size group: LEG-25,30] | 0.03 mm |
| Apologetic dimensions error at height H [Interchanged straight line track; accuracy level: advanced (H); model size group: LEG-25,30] | ±0.04 mm |
| Acceptable size error for width N [Interchanged straight line track; accuracy level: advanced (H); model size group: LEG-25,30] | ±0.04 mm |
| Mutual error in the form of a pair of Hs [Interchanged straight line track; accuracy level: advanced (H); model size group: LEG-25,30] | 0.015 mm |
| Mutual error in pair width N [Interchanged straight line track; accuracy level: advanced (H); model size group: LEG-25,30] | 0.015 mm |
| Apologetic dimensions error at height H [Interchanged straight line track; accuracy level: precision (P); model size group: LEG-25,30] | ±0.02 mm |
| Acceptable size error for width N [Interchanged straight line track; accuracy level: precision (P); model size group: LEG-25,30] | ±0.02 mm |
| Mutual error in the form of a pair of Hs [Interchanged straight line track; accuracy level: precision (P); model size group: LEG-25,30] | 0.007 mm |
| Mutual error in pair width N [Interchanged straight line track; accuracy level: precision (P); model size group: LEG-25,30] | 0.007 mm |
Datasheet
Supplier Information
Related Products
-
TODC-L Settling Box Type Sinking Flow Dust Collector
Tools and Machinery
Auroralaser
Under the strong negative pressure of the turbo fan, when the polluted air enter the air inlet, it first hits the baffle plate in the air inlet room, which acts as a baffle for the incoming air and slows down the flow velocity. Due to the gravity settlement, the coarse dust falls directly into the large particle dust port, which plays the role of pre-dust removal. After the fine-grained and low-density dust particles enter the dust filter chamber, the dust in the air stays on the surface of the filter cartridge, and the filtered clean air enters the air chamber and is collected by the exhaust pipe to through the fan to outlet and discharged.
-
TODC-P Series Dust Collector
Tools and Machinery
Auroralaser
TODC-P series dust collector is the first in the world to use gravity and downward airflow to promote the self-purification process, dusty air enters from the top and exits from the top on the other side. The principle of dust removal makes the direction of the dust-carrying air flow consistent with the direction of gravity, so that the dust is easier to settle and remove, and will be brought back to the filter element. When the dust collector is running, the dust-laden air enters the DFT dust collector from the top inlet, through the filter cartridge, the dust is collected on the outer surface of the filter cartridge, and the clean air is released into the clean air chamber through the center of the filter cartridge, and then passes through the filter cartridge for cleaning, so the high-pressure compressed air will rush directly into the center of the filter cartridge and blow off the dust on the surface of the filter cartridge. The dust follows the main air flow and falls down into the ash hopper under the action of gravity. The down flow dust collector can eradicate the problem of "secondary dust cleaning" and also improve the dust removal efficiency. (See the schematic diagram of the dust collector right side)
-
All-steel Type Standard Clean Bench
Tools and Machinery
Auroralaser
Cleanliness level [≥ 0.5μm (Federal Standard 209e)]: 100 level cleanliness level Dust particle [Diameter of 0.5μm]: Filtering efficiency 99.995% Average wind speed: 0.25m~0.45m/s (Fast and slow dual speed)
-
Au3tech A230E
Tools and Machinery
Auroralaser
Max Laser Power: 3000 W Focus Lens: D=30mm,F=125/150mm Collimator Lens: D=30mm,F=100mm
A230E/A23E Laser Cutting Head A smart cutting head specifically designed for medium to high power laser cutting, supporting electric focusing function. Internally integrated sensors, controllers, and transmission components. Equipped with a fiber optic cutting CNC system, it perfectly realizes a fully automated cutting process.
-
Au3tech A230E A235E
Tools and Machinery
Auroralaser
Max Laser Power: 3000 W Focus Lens: D=30mm,F=150mm Collimator Lens: D=30mm,F=100mm
A230E/A23E Laser Cutting Head A smart cutting head specifically designed for medium to high power laser cutting, supporting electric focusing function. Internally integrated sensors, controllers, and transmission components. Equipped with a fiber optic cutting CNC system, it perfectly realizes a fully automated cutting process.
Related Articles
Raybowlaser, a professional manufacturer of high-power laser chips, has officially launched its upgraded new-generation 1470nm high-performance laser chip. Achieving groundbreaking progress in rated output power and wall-plug efficiency (WPE), this innovative laser chip delivers superior and reliable core light source solutions for medical cosmetology, industrial processing, agricultural applications and scientific research equipment.
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
Founded in 2004, Wuhan Union Optic Inc. is a National Specialized, Refined, Unique & Innovative "Little Giant" high-tech enterprise located in Wuhan East Lake High-Tech Development Zone.
Precise spectral screening is essential for high-precision medical detection, spectroscopic analysis and intelligent imaging systems. Tailored for visible and near-infrared spectral separation, the SP900 shortpass optical filter delivers high-efficiency light transmission and deep infrared blocking performance. It effectively eliminates stray light interference, improves signal-to-noise ratio (SNR), and serves as a core optical component for biomedical instruments, scientific analysis equipment and machine vision systems.
Loading...
Name
Phone
Organization
Use Case
Database Platform