Beam Shaper DOE SLB-DOE25-532-6-FTC200

Beam Shaper DOE SLB-DOE25-532-6-FTC200

Supplier
Sinteclaser
Part Number
SLB-DOE25-532-6-FTC200
Category
Beam Shapers
Origin
China

A DOE homogenizer is a flat optical element designed using diffractive optics, comprising a liquid crystal polymer (LCP) film and two N-BK7 windows. The design phase is calculated by point-to-point mapping from known incident-beam parameters, lens focal length and desired output parameters. The LCP film introduces the designed geometric-phase distribution to shape and homogenize a Gaussian (TEM00, M2<1.3) incident beam. DOE homogenizers provide non-collimated homogenization of single-mode laser beams into arbitrary geometries, including squares, circles and lines. High uniformity, transmission and damage threshold, with sharp boundaries, give them strong potential in laser aesthetics, processing and surface treatment, including welding, marking, cutting, skin aesthetics and laser therapy. They offer improved energy utilization, processing quality and precision, with more flexible control of processing scale. In addition to standard products, specifications are customizable; contact us for UV or high-power homogenizing DOEs. Parameter definitions: Output spot size is the full width at half maximum of the normalized spot-energy distribution. Output spot nonuniformity is the RMS energy error over the region above 90% of the normalized energy distribution. Transition-region width is the edge-region width corresponding to 13.5%-90% normalized energy. Diffraction efficiency is the energy in the region above 90% of the normalized spot-energy distribution divided by all output optical energy.

Specification Snapshot
Operating Wavelength [Custom]
400-1700 nm
Reflectance Ravg [Standard products; 0° angle of incidence]
<0.5%
Diffraction Efficiency [Standard products; diffraction efficiency: energy in the region above 90% of the normalized spot-energy distribution divided by all output optical energy]
>95%
Request a Quote Download Datasheet
Save to Favorites Save to Favorites

Overview

A DOE homogenizer is a flat optical element designed using diffractive optics, comprising a liquid crystal polymer (LCP) film and two N-BK7 windows. The design phase is calculated by point-to-point mapping from known incident-beam parameters, lens focal length and desired output parameters. The LCP film introduces the designed geometric-phase distribution to shape and homogenize a Gaussian (TEM00, M2<1.3) incident beam. DOE homogenizers provide non-collimated homogenization of single-mode laser beams into arbitrary geometries, including squares, circles and lines. High uniformity, transmission and damage threshold, with sharp boundaries, give them strong potential in laser aesthetics, processing and surface treatment, including welding, marking, cutting, skin aesthetics and laser therapy. They offer improved energy utilization, processing quality and precision, with more flexible control of processing scale. In addition to standard products, specifications are customizable; contact us for UV or high-power homogenizing DOEs. Parameter definitions: Output spot size is the full width at half maximum of the normalized spot-energy distribution. Output spot nonuniformity is the RMS energy error over the region above 90% of the normalized energy distribution. Transition-region width is the edge-region width corresponding to 13.5%-90% normalized energy. Diffraction efficiency is the energy in the region above 90% of the normalized spot-energy distribution divided by all output optical energy.

Specifications

ParameterValue
Operating Wavelength [Standard Products]532 nm,1064 nm
Operating Wavelength [Custom]400-1700 nm
Element Dimensions and Mounting Method [Standard Products]Ø25.4x3.2mm, single-side trimmed, compatible with 1-inch optic mounts
Input Beam Quality Requirements [Standard Products]TEM00,M²<1.3
Input Beam Polarization State Requirements [Standard Products]Uniform Polarization State
Input Beam Size [Standard Products]Ø6 mm, Ø7 mm
Input Beam Size [Custom]Recommended: <Half the Clear Aperture
Clear Aperture Dimension [Standard Products]15×15 mm, Ø15 mm
Output Spot Shape [Standard Products]Square, Circular, Line-Shaped
Output Spot Shape [Custom]Arbitrary Geometric Shapes
Output Spot Size [Standard products; output spot size: full width at half maximum of the normalized spot-energy distribution]>1.5 DL (Diffraction Limit), adjustable with the selected focusing lens
Output Spot Nonuniformity [Standard products; output spot nonuniformity: RMS energy error over the region above 90% of the normalized spot-energy distribution]<5%
Output Spot Nonuniformity [Custom; output spot nonuniformity: RMS energy error over the region above 90% of the normalized spot-energy distribution]<10%, with a minimum achievable value <5%
Transition Region Width [Standard products; transition-region width: edge-region width corresponding to 13.5%-90% normalized energy]>0.5 DL (Diffraction Limit)
Transmittance [Standard Products]>98%
Transmittance [Custom ;400-450 nm]>85%
Transmittance [Custom ;450-1700 nm]>96%
Reflectance Ravg [Standard products; 0° angle of incidence]<0.5%
Diffraction Efficiency [Standard products; diffraction efficiency: energy in the region above 90% of the normalized spot-energy distribution divided by all output optical energy]>95%

Key Features

Flat, compact structure for easy integration Transmissive homogenization for high energy utilization Continuous phase for high diffraction efficiency and effective homogenization Flexible customization with adjustable homogenized spot size Suitable for non-collimated homogenization of high-quality single-mode lasers

Datasheet

Please provide your email to download the datasheet.

Your name
Email Address

Invalid email format. Please try again.

Send Request

Supplier Information

Si
Sinteclaser
View Supplier →
Wuhan Sintec Optoelectronics Technology Co., Ltd. is a high-tech enterprise and a specialized and sophisticated 'Little Giant' enterprise at the upstream of the domestic laser industry chain. The company focuses on the R&D, manufacturing, sales and service of lasers and laser accessories. Its main products include femtosecond lasers, picosecond lasers, acousto-optic modulators, optical components, etc., widely used in laser equipment manufacturing, scientific research and other fields. Located in Wuhan Optical Valley, with a modern industrial park, the company provides one-stop personalized services for the laser industry, with customers all over China and products exported overseas.

Request a Quote

Our team responds within 24–48 hours
Beam Shaper DOE SLB-DOE25-532-6-FTC200
Sinteclaser · Beam Shapers
Direct from Manufacturer
Your inquiry will be sent directly to the manufacturer
Photonics Source Platform
We handles the inquiry on your behalf
Your information is protected and will never be shared without consent.
Contact Us

Loading...

GetExperimental Plan

Name

Phone

+86

Organization

Use Case

AI Parametric Selection
Smart Match · Precise Recs
Enter Specifications
AI Smart Matching
Get Best Matches
Skip Manual Comparison
Find Best Solutions Fast
Select Now →