HVPS-300 High-Voltage Power Supplies (MHz-Class Pockels Cell Drivers) HVPS-BT-300-2kV
HVPS-300 is a dedicated high-precision DC high-voltage power supply with bipolar output. Its output connector has three pins: ground, positive high voltage and negative high voltage. The HV positive and HV negative potentials are always equally spaced from ground; 4kV output is produced by +2kV at the HV positive pin and -2 kV at the HV negative pin. Its highly stable bipolar HV output makes HVPS-300 suitable mainly for driving high-voltage, high-repetition-rate Pockels cells commonly used in the laser industry. The module provides DC high voltage, adjustable up to 4kV by default, with higher voltages negotiable. Maximum output power exceeds 300W. A fan provides active cooling. All interfaces are analog by default, with digital interfaces available on request. Versions: a plug-in benchtop version for laboratories (100-240V AC), and an embedded version for integration powered by 24V DC. Input voltage: HVPS-300: 24VDC; HVPS-BT-300: 100-240VAC. Original technical-table output capacitance: depends on change. Common models (original table): HVPS-300-2kV | maximum output voltage 2kV, maximum output power exceeds 300W@2kV and decreases steadily with output voltage, output capacitance 13.5uF; HVPS-BT-300-2kV | benchtop version of HVPS-300-2kV; HVPS-300-4kV | maximum output voltage 4kV, maximum output power exceeds 300W@4kV and decreases steadily with output voltage, output capacitance 3.3uF; HVPS-BT-300-4kV | benchtop version of HVPS-300-4kV.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Voltage Input [HVPS-300 embedded version; benchtop version separately listed in the introduction as 100–240VAC] | +24VDC |
| Input Current [Full output power] | Up to 20A at full output power |
| High-Voltage Output Type | Bipolar, i.e. +V/2 applied to one output line; -V/2 to the other |
| Maximum Output Voltage | Up to 4 kV DC |
| Maximum Output Power [Within the 80–100% VMAX region] | >300W (within the 80-100% VMAX region) |
| Voltage Accuracy [Including temperature drift] | typical:< 0.5% typical (including temperature drift) |
| Ripple [Peak] | < 0.2% Peak |
| Efficiency | > 85% |
| Operating Temperature | +10~+40℃ |
| Storage Temperature | -20~+60℃ |
| Humidity [Non-condensing] | 0~90%, non-condensing |
| Dimensions [Without input and output] | 169x107x59mm (without input and output) |
| Weight | <1.0kg |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
1CH×25G/28G DML Driver
Software and Data Services
Xy-technology
XY5221DD is One. Single Channel Laser Driver ， Designed for direct modems 25Gb/s Laser Interface 。 The currents and the transients can be replaced by the currents. 2 Line Line Lines Interface Independent Programming ， Meanwhile... 2 Line Interface Supports also the inclusion of programmability for balancing and cross-point adjustments ， Take one. Tx Disable ， It can be closed. Laser Erosion and Moderation Current ， Existing IBIAS Monitor 。 This simulation output can be used to Laser Overcrowding and / or Laser Modulation Current for External Monitoring 。 There's a piece in there. ADC Functions ， It can be used for foot-inducing measurements via electrical input of a special back-cover monitor TX_PWR。ADC It can also be configured for measurement. VCC（ ..can measure each Power Supply ） and IBIAS（ Average Laser Erosion of currents ）。
-
1CH×25G/28G EML Driver
Software and Data Services
Xy-technology
XY5221E is A high-performance piece. Single Channel 28Gbps EML Driver 。 It provides daring. 30GHz High bandwidth and greater than 2.5Vpp and the output range ， The cost of the operation is about 0.17W。 It's designed for use in... Drive EML Laser ， The chip is available in nudity chip form. 。
-
4CH×25G/28G DML Driver
Software and Data Services
Xy-technology
XY5224DD is One. Four Channel Laser Driver ， Designed for direct modems 25Gb/s Laser Interface 。 The currents and the transients can be replaced by the currents. 2 Line Line Lines Interface Independent Programming ， Meanwhile... 2 Line Interface Supports also the inclusion of programmability for balancing and cross-point adjustments ， Take one. Tx Disable ， It can be closed. Laser Erosion and Moderation Current ， Existing IBIAS Monitor 。 This simulation output can be used to Laser Overcrowding and / or Laser Modulation Current for External Monitoring 。 There's a piece in there. ADC Functions ， It can be used for foot-inducing measurements via electrical input of a special back-cover monitor TX_PWR。ADC It can also be configured for measurement. VCC（ ..can measure each Power Supply ） and IBIAS（ Average Laser Erosion of currents ）。
-
4CH×25G/28G EML Driver
Software and Data Services
Xy-technology
XY5224E is A high-performance piece. Four Channel 28Gbps EML Driver 。 It provides daring. 30GHz High bandwidth and greater than 2.5Vpp and the output range ， The cost of the operation is about 0.45W。 It's designed for use in... Drive EML Laser ， The chip is available in nudity chip form. 。
-
25G/28G CDR+VCSEL Driver
Software and Data Services
Xy-technology
XY5921V Integration VCSEL Driver 、 Balancer and clock data recovery 。 None The reference clock will support it. 24.3Gbps Present. 28.1Gbps Rate range ， It's also possible. bypass Mode supports lower rate 。 The chip is provided in nudist form. 。
Related Articles
As a professional ultraviolet‑laser solution provider, Precilasers has launched its 266 nm narrow‑linewidth industrial laser, delivering reliable single‑frequency output for high‑precision interference lithography, semiconductor inspection and precision metrology applications.
On November 28, 2024, the 3rd China Laser Star Enterprise Summit & Advanced Laser Processing Technology Summit, an annual influential event in the laser industry, was grandly held in Wuhan Optics Valley.
Within cutting‑edge ultrafast photonics research, asynchronous optical sampling (ASOPS) and synchronous sampling serve as fundamental technologies for terahertz excitation detection, coherent Raman imaging and other time‑resolved spectroscopy experiments.
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
Loading...
Name
Phone
Organization
Use Case
Database Platform