1030nm 10W/20W PM High Power Isolator & WDM (TGG Based)
The PM Isolator WDM hybrid combines WDM and isolator into a compact package to offer cost saving solution. This device is ideal for fiber amplifier application to combine signal and pump wavelengths with very stable signal isolation.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Signal Channel-Wavelength Range [Above specifications are for device without connector.] | 1030±10 nm |
| Signal Channel-Max. Insertion Loss at 23℃ [Above specifications are for device without connector. / 23℃ / For device with connector, IL is 0.3dB higher, RL is 5dB lower, and ER is 2dB lower.] | 1.5 nm |
| Signal Channel-Min. Signal Reversed Isolation at 23℃ [Above specifications are for device without connector. / 23℃] | 25 dB |
| Signal Channel-Min. Isolation (Com to Pass @ Ref band wavelength) [Above specifications are for device without connector.；Com to Pass @ Ref band wavelength；@ Ref band wavelength)] | 30 dB |
| Reflection Channel-Wavelength Range [Above specifications are for device without connector.] | 960-990 nm |
| Reflection Channel-Max. Insertion Loss at 23℃ [Above specifications are for device without connector. / 23℃ / For device with connector, IL is 0.3dB higher, RL is 5dB lower, and ER is 2dB lower.] | 0.8 dB |
| Reflection Channel-Min.Isolation (Com to Ref @ Pass band wavelength) [Above specifications are for device without connector.；Com to Ref @ Pass band wavelength；@ Pass band wavelength)] | 15 dB |
| Max. Polarization Dependent Loss at 23℃ (SM Fiber Type) [Above specifications are for device without connector. / 23℃ (SM Fiber Type)] | 0.15 dB |
| Min. Extinction Ratio at 23℃ (PM Fiber Type, Signal/Pump Route) [Above specifications are for device without connector. / 23℃ (PM Fiber Type, Signal/Pump Route) / For device with connector, IL is 0.3dB higher, RL is 5dB lower, and ER is 2dB lower.] | 20/18 |
| Min. Return Loss (Input/ Output) [Above specifications are for device without connector. / For device with connector, IL is 0.3dB higher, RL is 5dB lower, and ER is 2dB lower.] | 50 dB |
| Max. Average Optical Power [Above specifications are for device without connector.] | 1, 2, 5, 10, 20 or Specified |
| Max. Peak Power for ns Pulse [Above specifications are for device without connector.] | 10 or Specified |
| Max. Tensile Load [Above specifications are for device without connector.] | 5 N |
| Package Dimension [Above specifications are for device without connector.] | 64 mm × 28 mm × 26 mm |
| Operating Temperature [Above specifications are for device without connector.] | +10~+50 ℃ |
| Storage Temperature [Above specifications are for device without connector.] | 0~+60 ℃ |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Single-Channel 4K Ultra-HD H.265 Encoder Module E-UD-0111-00-01
Communications & Energy
Prevail-catv
Input Interface - Type 1 [One Primary and One Backup]: HDMI*2 Input Interface - Type 2: Digital Audio (SPDIF) Input Interface - Type 3: Analog Audio
-
IP Switch WS-IP
Communications & Energy
Prevail-catv
WS-IP Professional Broadcast IP Switcher,Years of Development/Improvement,Excellent Performance,Meets Relevant National Standards.
-
Enhanced SDH/POS Network Traffic Splitter / Network Traffic Replicator / Network TAP Switch RD-TAP-48P
Communications & Energy
Fiberwdm
Service Interface (POS): 24 Receivers for155M/622M/2.5G/10G POS and10G WAN;Each POS Rate Independently/Dynamically Switchable Service Interface (ETH): 24 10GE/1GE Transmit/Receive Channels Throughput (*) [Functions Listed Are a Collection; Functions and Interface Specifications Customizable by Scenario, Including but Not Limited to Those Listed]: 480Gbps
Enhanced SDH/POS Tap Converts to Ethernet,Flexible Efficient Collection/Filtering/Aggregation/Distribution/Load Balance/Replication for Traffic Control,Backup,Security.
-
6-Electrical-Port POE Gigabit Industrial Switch FW304GPS-2G
Communications & Energy
Fiberwdm
Network Interface: 6 10/100/1000M RJ45 Ports Performance Specifications: MAC address table: 2k; backplane bandwidth: 12Gbps; packet forwarding rate: 8.9Mpps; forwarding mode: store-and-forward Power Supply Support: Maximum Output Power: 30W; Voltage Input: 48-56V DC; Input Method: Pluggable 5-Pin Terminal with 5.08mm Pitch
FW304GPS-2G is a quasi-industrial all-Gigabit managed PoE switch with six10/100/1000M adaptive RJ45 ports;the description also specifies two10/100/1000M RJ45 uplinks. All ports support6KV lightning protection,with supply overtemperature/overvoltage and surge-current protection. IEEE802.3x full-duplex and half-duplex backpressure flow control are supported. IEEE802.3af/at provides up to30W PoE per port. Reliable protection suits complex environments. Redundant48–56VDC dual inputs support dual-DC or the stated dual-DC/AC redundant supply arrangements.
-
Broadband PON Network Single-Line Dual-Access Equipment FW-P801
Communications & Energy
Fiberwdm
Insertion Loss [Paired Single-Line Dual-Access Equipment; PDF Page 2 Product Features]: <1.6 dB
Single-Fiber Residential Drop Supports Multiple Broadband Services per User/Tenants or Fast Network Migration before Expiry,Avoids Second Entry Cable/Uses Existing Drop for Fast Installation.
Related Articles
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
As fundamental refractive optical components, plano‑convex spherical lenses consist of one convex spherical surface and one flat surface.
FiDAR, the fiber‑optic radar vehicle positioning and tracking system developed by Jianhe Bafang, is a high‑sensitivity distributed fiber‑sensing solution designed for intelligent traffic road monitoring. It outputs real‑time spatial coordinates of every vehicle across the full road section around‑the‑clock, delivering a brand‑new sensing technology for vehicle‑road cooperation, smart highway construction and urban traffic management.
Raybowlaser, a professional manufacturer of high-power laser chips, has officially launched its upgraded new-generation 1470nm high-performance laser chip. Achieving groundbreaking progress in rated output power and wall-plug efficiency (WPE), this innovative laser chip delivers superior and reliable core light source solutions for medical cosmetology, industrial processing, agricultural applications and scientific research equipment.
Loading...
Name
Phone
Organization
Use Case
Database Platform