EASY Series Compact Small PLCs for All Application Scenarios Easy523
The EASY series of compact small and medium controllers offers 8 models for varied automation requirements, including tight space constraints, multiaxis motion, temperature control and communication networks. A modular body supports expansion cards and modules for precise application matching without wasted resources. Integrated industrial-network protocols connect data acquisition systems and peripheral equipment. Independently developed programming software continuously improves usability and follows engineering workflows for easier operation. As easy as turning a hand, created for real scenarios: the innovative design comes from actual applications and user pain points.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Dimensions | 53 mm × 100 mm × 83 mm |
| Program Data Capacity | 200K steps of user programs; 1MByte of user-defined variables, including 128kByte with power-off retention; approximately 150K soft devices, with power-off retention supported for numbers after 1000 |
| Supported Axis Count (Pulse + Bus) | Up to 32 axes (pulse axes + EtherCat axes) |
| High-Speed Input | 8 Channels, 200K |
| High-Speed Output | 5 Axes, 200K, with PWM Pulse-Width Modulation |
| Expansion Modules | Supports up to 16 Local Expansion Modules |
| Expansion Cards | Supports up to 2 Expansion Cards |
| Programming Language | LD, SFC, with FB/FC functions (LD); ST supported with firmware 5.67.0.0 or later and software AutoShop4.8.1.0 or later |
| Instruction Speed (Steps) [20k Steps] | 20k steps 1.6ms |
| Bit-Processing Instructions | 0.113μs |
| Word-Transfer Instructions | 0.232μs |
| Floating-Point Transfer | 0.578μs |
| Other Notes | Supports Cam, Gear and Interpolation |
| Terminal Input Supply Rated Voltage | 24V DC±10%（21.6V DC ～ 26.4V DC） |
| Terminal Input Supply Rated Current [Maximum at 24V] | 1A (maximum at 24V) |
| 24V Input Supply Protection | Supports Short-Circuit and Reverse-Polarity Protection |
| Module Hot-Swap Function | Not Supported |
| Input Type | Digital Input |
| Input Channel Count | 8 channels |
| Input Method | Source / Sink Type |
| Input Voltage Rating | 24V DC±10%（21.6V DC ～ 26.4V DC） |
| Software Filtering Time [Low Speed] | ● Low Speed :2ms ～ 1000ms |
| Software Filtering Time [High Speed] | ● High Speed :2us ～ 1000us |
| Input Isolation Method | Capacitive isolation using an integrated chip |
| Input Derating | Full Load at 45℃, Derated to 75% When Operating at 55℃ |
| Output Type | Transistor NPN Output |
| Output Channel Count | 8 channels |
| Output Voltage Rating | 24V DC±10%（20.4V DC ～ 26.4V DC） |
| High-Speed Output (Y0～Y7) - Output Load (Resistive) | 0.5A/point, 2A/8 points |
| High-Speed Output (Y0～Y7) - Output Load (Inductive) | 7.2W/ Point, 24W/8 Points |
| High-Speed Output (Y0～Y7) - Output Load (Lamp) | 5W/ Point, 18W/8 Points |
| High-Speed Output (Y0～Y7) - Load Current Requirements [When Using Output Above 10kHz] | For output above 10kHz, load current ≥ 12mA |
| High-Speed Output (Y0～Y7)- Maximum Output Frequency | Resistive load 200kHz, inductive load 0.5Hz, lamp load 10Hz |
| Output Isolation Method | Capacitive isolation using an integrated chip |
| Short-Circuit Protection Function | Each Channel Supports Short-Circuit Protection |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
22MA PLUS Series (Bus) 22MAPLUS Automation and Control Syntecclub
Axis Count: 6 DA [Optional Specifications]: △ Inclined-Plane Machining [Optional Specifications]: △
22MA PLUS. 22MA PLUS Series controllers use Yaskawa bus communications to improve timing issues in multiaxis motion control with conventional pulse-based general-purpose controllers, providing good coordinated control and timely response.
-
22PLUS series lathe controllers (serial) 22TAPLUS Automation and Control Syntecclub
Axis Count: 4 DA [Optional Specifications]: △ Maximum I/O Count [RIO、M3IO]: 64/64 (RIO、M3IO)
22TA PLUS and 22TB PLUS. 22PLUS series controllers use Yaskawa serial communications to improve timing issues in multiaxis motion control with conventional pulse-based general-purpose controllers, providing good coordinated control and timely response.
-
PLC Optical Splitter Automation and Control Adfiber
1x4-Center Wavelength [The Specifications Above Exclude Connectors]: 1280 ~ 1650 1x4 - Insertion loss (dB) .* [The Specifications Above Exclude Connectors]: ≤ 7.3 dB 1x4 - Uniformity (dB) .* [The Specifications Above Exclude Connectors]: ≤ 1.0 dB
The planar lightwave circuit splitter (PLC Splitter) is an integrated-waveguide optical power distribution device on a quartz substrate. It offers small size, a wide operating wavelength range, high reliability and uniform splitting, particularly for connecting central-office and terminal equipment and splitting optical signals in passive optical networks such as EPON and GPON.
-
Vision alignment system Automation and Control Chinaddwy
-
MDS3200+
Automation and Control
Cctc
Recommended fluid: LED phosphors, SMT adhesives (including conductive adhesives containing hard particles), silicone resins, underfills, hot-melt adhesives, solder paste, etc. Striker type: Replaceable; different shapes; monolithic ceramic or metal carbide Dispensing volume [Minimum, depending on fluid type; Maximum single-dot precision can be controlled by an external independent pulse signal]: 1 nanoliters single point
Related Articles
The LZFL405‑80mW‑3 series from Shenzhen Leirte Optoelectronics Co., Ltd. is a coaxial‑packaged violet‑blue single‑mode fiber‑coupled laser diode. It delivers 80 mW continuous‑wave output at 405 nm. Light is coupled into 3 μm core‑diameter single‑mode fiber for clean beam quality and easy integration into diverse optical systems. It serves as a compact violet‑blue light source for medical instruments and industrial printing applications.
Wuhan Optics Valley Quantum Technology Co., Ltd. is a leading domestic developer of high‑speed semiconductor optical chips and photodetector components. Our product portfolio covers InGaAs avalanche photodiode bare dies and PIN photodetector chips designed for fiber‑optic communication
As a professional ultraviolet‑laser solution provider, Precilasers has launched its 266 nm narrow‑linewidth industrial laser, delivering reliable single‑frequency output for high‑precision interference lithography, semiconductor inspection and precision metrology applications.
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
Loading...
Name
Phone
Organization
Use Case
Database Platform