SAG Free-Space Electro-Optic Modulator (Pockels Cell)
EOM

SAG Free-Space Electro-Optic Modulator (Pockels Cell)

Supplier
Sinteclaser
Category
EOM
Origin
China

Compact low-voltage free-space electro-optic Pockels-cell modulators for phase or intensity. Special crystals have weaker piezoelectric effects and lower charge mobility than conventional magnesium-doped lithium niobate, giving cleaner response, less ringing, better energy efficiency, lower power consumption, and stable operation at shorter wavelengths and higher optical power. Resonant and direct-drive versions modulate phase, polarization, or amplitude of free-space lasers. Resonant versions greatly reduce drive voltage and can operate from a laboratory function generator. Each provides three fixed resonances,1MHz,15MHz,and30MHz, selected manually by toggle switch for economical, convenient testing;custom resonances up to100MHz are available. Direct-drive versions operate from DC to high frequency with a high-voltage driver;performance depends on the driver. Company-developed or compatible third-party drivers can be used. Free-Space Electro-Optic Modulators (Pockels Cells):phase or intensity modulation,3mm clear aperture,300-2000nm,DC-MHz. The SAG-FEOM series uses specially designed compensated electro-optic crystal pairs with better high-power handling and short-wavelength stability than conventional lithium niobate (LiNbO₃). Single-pair and double-pair crystal-length options lower voltage and enable deeper or faster modulation. Matched drivers cover DC to megahertz. Options include polarizing cubes for high-extinction intensity modulation, isolators against back reflections, and output detectors for feedback. Intensity modulation requires linearly polarized input. Notes[1]:depends on polarizer and beam quality;[2]:high-power versions available. Ordering:SAG-FEOM-X-WWW-P-LL-I-O-D-G. SAG-FEOM identifies SAG free-space EOMs. X:modulation type,A intensity,P phase. WWW:wavelength,W05 (400~600nm),W07 (600~900 nm),W09 (900~1250 nm),W14 (1250~1650 nm),W03 (320~500 nm),W20 (1920~2400 nm). P:power class,1 standard,2 high power. LL:crystal length,1X (1-times),2X (2-times),3X (3-times). I:input polarizer,N none,P Polacore,B PBS,G Glan-Thompson. O:output polarizer,N none,P Polacore,B PBS,G Glan-Thompson. D:driver,N no,Y yes. G:isolator,N none,1 single stage,2 dual stage. Example:SAG-FEOM-A-W07-1-2X-P-P-Y-1. Polarizer ratings:Polacore,CW W/cm2;PBS,CW W/cm2;Glan-Thompson,CW kW/cm2. Resonant Free-Space Modulators (Pockels Cells):2mm aperture,400nm to2000nm,fixed frequency1 to100MHz. The crystal-based SAG-REOM operates at fixed resonance with low-voltage phase, polarization, or amplitude modulation. Resonance options are1 to20MHz. Standard and RTP-crystal high-power versions suit different needs. Standard models use one crystal pair;models above1000nm use two pairs for full modulation depth. This minimizes piezoelectric effects and charge accumulation to reduce sinusoidal-response distortion. Amplitude modulation requires polarized input;input and output polarizers improve extinction ratio (ER). Half-wave voltage is the voltage for maximum depth or π phase shift and increases with wavelength. Ordering:SAG-REOM-X-WWW-P-RR-I-O-F. SAG-REOM identifies SAG resonant free-space EOMs. X:A intensity,P phase. WWW:wavelength,W03 (200~400nm),W05 (400~600nm),W07 (600~900 nm),W10 (900~1250 nm),W14 (1250~1650 nm). P:optical power,1 standard,2W,5W,10W,20W,50W,100W,300W. RR:resonance,5MHz,10MHz,20MHz,30MHz,50MHz. I:input polarizer,N none,B PBS,G Glan-Thompson. O:output polarizer,N none,B PBS,G Glan-Thompson. F:single-resonance version. Example:SAG-REOM-P-W10-2W-30-B-B. Polarizer ratings:PBS,CW15W/cm2;Glan-Thompson,CW2kW/cm2. Operation:align the input beam along the optical axis without hitting crystal walls. Place a vertical input polarizer and adjust incident polarization for maximum output. Place a horizontal output polarizer and adjust for minimum transmitted intensity (extinction). Gradually apply voltage and observe output;at operating voltage Vp,intensity is maximum. GHz Resonant Optical Phase Modulators:1-3.05 GHz,optional temperature control. The SAG-GHZM uses advanced electro-optic technology for high-speed phase modulation. An integrated resonant circuit supports low-voltage drive. Free-space and fiber-coupled packages are available, with optional TEC stabilization and integrated amplifier drivers for greater depth. Linear input polarization is required. Note:active TEC cooling is required. Ordering:SAG-GHZM-X-WWW-RRR-I-O-T-F. SAG-GHZM identifies SAG GHz resonant phase modulators. X:type,R standard,S special. WWW:wavelength,350nm,450nm,532nm,550nm,650nm,780nm. RRR:resonance,112 (1.12 GHz),305 (3.05 GHz),175 (1.75 GHz). I:input fiber,N none,P PM480,S special. O:output fiber,N none,P PM480,S special. T:TEC,N no,Y yes. The explanatory text labels the RF amplifier option R:N no,Y yes,S special. Example:SAG-GHZM-R-350-112-P-P-N-Y. High-Voltage Electro-Optic Modulator (Pockels Cell) Drivers:maximum output400V. SAG-HVED analog high-voltage drivers provide up to±200V at1MHz bandwidth or400V at0.5MHz, for nonresonant EOMs modulating wavelengths up to1060nm. Alternating polarity minimizes photorefractive charge accumulation, especially at short wavelengths and high power. Adjustable DC bias up to50V tunes performance. Example:a-200V to+200V scan with10V bias shifts output to-190V,+200V,with the positive side clipped;for a-100V to+100V scan,the output becomes-90V to+110V. Bias flexibility enables precise control and optimized performance. Amplitude modulation requires polarized light;input/output polarizers substantially improve ER. Note:measurement is based on10%—90% levels and depends on amplitude and capacitive load;at400V,the repetition rate is0.5MHz. Ordering:SAG-HVED-VVV-P-RRR. SAG-HVED identifies SAG high-voltage Pockels-cell drivers. VVV:maximum voltage,220 (±220V),400 (400V),S special. RRR:repetition rate,3 (0.3 MHz),5 (0.5 MHz),7 (0.7 MHz). Example:SAG-HVED-220-B-3. Only the220V version supports1MHz repetition.

Specification Snapshot
Clear Aperture Dimension [SAG-FEOM]
3mm
Clear Aperture Dimension [SAG-REOM]
3mm
Operating Temperature [SAG-REOM]
-20–50°C
Wavelengths [SAG-GHZM]
350–780nm
Resonant Frequency [SAG-GHZM]
0.7–3.05GHz
Bandwidth [SAG-GHZM]
3.8–10MHz
Request a Quote Download Datasheet
Save to Favorites Save to Favorites

Overview

Compact low-voltage free-space electro-optic Pockels-cell modulators for phase or intensity. Special crystals have weaker piezoelectric effects and lower charge mobility than conventional magnesium-doped lithium niobate, giving cleaner response, less ringing, better energy efficiency, lower power consumption, and stable operation at shorter wavelengths and higher optical power. Resonant and direct-drive versions modulate phase, polarization, or amplitude of free-space lasers. Resonant versions greatly reduce drive voltage and can operate from a laboratory function generator. Each provides three fixed resonances,1MHz,15MHz,and30MHz, selected manually by toggle switch for economical, convenient testing;custom resonances up to100MHz are available. Direct-drive versions operate from DC to high frequency with a high-voltage driver;performance depends on the driver. Company-developed or compatible third-party drivers can be used. Free-Space Electro-Optic Modulators (Pockels Cells):phase or intensity modulation,3mm clear aperture,300-2000nm,DC-MHz. The SAG-FEOM series uses specially designed compensated electro-optic crystal pairs with better high-power handling and short-wavelength stability than conventional lithium niobate (LiNbO₃). Single-pair and double-pair crystal-length options lower voltage and enable deeper or faster modulation. Matched drivers cover DC to megahertz. Options include polarizing cubes for high-extinction intensity modulation, isolators against back reflections, and output detectors for feedback. Intensity modulation requires linearly polarized input. Notes[1]:depends on polarizer and beam quality;[2]:high-power versions available. Ordering:SAG-FEOM-X-WWW-P-LL-I-O-D-G. SAG-FEOM identifies SAG free-space EOMs. X:modulation type,A intensity,P phase. WWW:wavelength,W05 (400~600nm),W07 (600~900 nm),W09 (900~1250 nm),W14 (1250~1650 nm),W03 (320~500 nm),W20 (1920~2400 nm). P:power class,1 standard,2 high power. LL:crystal length,1X (1-times),2X (2-times),3X (3-times). I:input polarizer,N none,P Polacore,B PBS,G Glan-Thompson. O:output polarizer,N none,P Polacore,B PBS,G Glan-Thompson. D:driver,N no,Y yes. G:isolator,N none,1 single stage,2 dual stage. Example:SAG-FEOM-A-W07-1-2X-P-P-Y-1. Polarizer ratings:Polacore,CW W/cm2;PBS,CW W/cm2;Glan-Thompson,CW kW/cm2. Resonant Free-Space Modulators (Pockels Cells):2mm aperture,400nm to2000nm,fixed frequency1 to100MHz. The crystal-based SAG-REOM operates at fixed resonance with low-voltage phase, polarization, or amplitude modulation. Resonance options are1 to20MHz. Standard and RTP-crystal high-power versions suit different needs. Standard models use one crystal pair;models above1000nm use two pairs for full modulation depth. This minimizes piezoelectric effects and charge accumulation to reduce sinusoidal-response distortion. Amplitude modulation requires polarized input;input and output polarizers improve extinction ratio (ER). Half-wave voltage is the voltage for maximum depth or π phase shift and increases with wavelength. Ordering:SAG-REOM-X-WWW-P-RR-I-O-F. SAG-REOM identifies SAG resonant free-space EOMs. X:A intensity,P phase. WWW:wavelength,W03 (200~400nm),W05 (400~600nm),W07 (600~900 nm),W10 (900~1250 nm),W14 (1250~1650 nm). P:optical power,1 standard,2W,5W,10W,20W,50W,100W,300W. RR:resonance,5MHz,10MHz,20MHz,30MHz,50MHz. I:input polarizer,N none,B PBS,G Glan-Thompson. O:output polarizer,N none,B PBS,G Glan-Thompson. F:single-resonance version. Example:SAG-REOM-P-W10-2W-30-B-B. Polarizer ratings:PBS,CW15W/cm2;Glan-Thompson,CW2kW/cm2. Operation:align the input beam along the optical axis without hitting crystal walls. Place a vertical input polarizer and adjust incident polarization for maximum output. Place a horizontal output polarizer and adjust for minimum transmitted intensity (extinction). Gradually apply voltage and observe output;at operating voltage Vp,intensity is maximum. GHz Resonant Optical Phase Modulators:1-3.05 GHz,optional temperature control. The SAG-GHZM uses advanced electro-optic technology for high-speed phase modulation. An integrated resonant circuit supports low-voltage drive. Free-space and fiber-coupled packages are available, with optional TEC stabilization and integrated amplifier drivers for greater depth. Linear input polarization is required. Note:active TEC cooling is required. Ordering:SAG-GHZM-X-WWW-RRR-I-O-T-F. SAG-GHZM identifies SAG GHz resonant phase modulators. X:type,R standard,S special. WWW:wavelength,350nm,450nm,532nm,550nm,650nm,780nm. RRR:resonance,112 (1.12 GHz),305 (3.05 GHz),175 (1.75 GHz). I:input fiber,N none,P PM480,S special. O:output fiber,N none,P PM480,S special. T:TEC,N no,Y yes. The explanatory text labels the RF amplifier option R:N no,Y yes,S special. Example:SAG-GHZM-R-350-112-P-P-N-Y. High-Voltage Electro-Optic Modulator (Pockels Cell) Drivers:maximum output400V. SAG-HVED analog high-voltage drivers provide up to±200V at1MHz bandwidth or400V at0.5MHz, for nonresonant EOMs modulating wavelengths up to1060nm. Alternating polarity minimizes photorefractive charge accumulation, especially at short wavelengths and high power. Adjustable DC bias up to50V tunes performance. Example:a-200V to+200V scan with10V bias shifts output to-190V,+200V,with the positive side clipped;for a-100V to+100V scan,the output becomes-90V to+110V. Bias flexibility enables precise control and optimized performance. Amplitude modulation requires polarized light;input/output polarizers substantially improve ER. Note:measurement is based on10%—90% levels and depends on amplitude and capacitive load;at400V,the repetition rate is0.5MHz. Ordering:SAG-HVED-VVV-P-RRR. SAG-HVED identifies SAG high-voltage Pockels-cell drivers. VVV:maximum voltage,220 (±220V),400 (400V),S special. RRR:repetition rate,3 (0.3 MHz),5 (0.5 MHz),7 (0.7 MHz). Example:SAG-HVED-220-B-3. Only the220V version supports1MHz repetition.

Specifications

ParameterValue
Wavelengths [SAG-FEOM]400–600nm/600–900nm/900–1250nm/1250–1650nm
Clear Aperture Dimension [SAG-FEOM]3mm
Nonresonant Half-Wave Voltage [SAG-FEOM]typical 80V, max 600V
Extinction Ratio [1] [SAG-FEOM;Depends on Polarizer and Beam Quality[1]]10–30dB, typical :30dB
Resonant Input Impedance [SAG-FEOM]50ohms
Nonresonant Input Capacitance [SAG-FEOM]14pF
Maximum Optical Power Density [SAG-FEOM;532nm]typical:2W
Maximum Optical Power Density [SAG-FEOM;532nm;High-Power Version[2]]max:10W
Maximum Optical Power Density [SAG-FEOM;1064nm]typical:5W
Maximum Optical Power Density [SAG-FEOM;1064nm;High-Power Version[2]]max:20W
Operating Temperature [SAG-FEOM]- 20–50°C
Wavelengths [SAG-REOM]400–600nm 600–900nm 900–1250nm 1250–1650nm
Clear Aperture Dimension [SAG-REOM]3mm
Nonresonant Half-Wave Voltage [SAG-REOM; Wavelength :633nm]225V @ 633nm
Resonant Half-Wave Voltage* [SAG-REOM; Wavelength :633nm]15V @ 633nm
Extinction Ratio [SAG-REOM; Wavelength :633nm]10dB@ 633nm
Resonant Input Impedance [SAG-REOM]50ohms
Nonresonant Input Capacitance [SAG-REOM]14pF
Maximum Optical Power Density [SAG-REOM;Standard Version;550nm]typical:2W/mm²
Maximum Optical Power Density [SAG-REOM;Standard Version;1060nm]max:4W/mm²
Maximum Optical Power Density [SAG-REOM;High-Power Version;550nm]typical:1MW/mm²
Maximum Optical Power Density [SAG-REOM;High-Power Version;1060nm]max:500MW/mm²
Operating Temperature [SAG-REOM]-20–50°C
Wavelengths [SAG-GHZM]350–780nm
Resonant Frequency [SAG-GHZM]0.7–3.05GHz
Bandwidth [SAG-GHZM]3.8–10MHz
Quality Factor (Q) [SAG-GHZM]325
Wavefront Distortion at633nm [SAG-GHZM; Wavelength :633nm;@ 633nm]≤1/6λ
Modulation Depth [SAG-GHZM]≤2.5rad
Sensitivity [SAG-GHZM]0.38–0.47rad/V
RF Power Required for1rad Modulation @400nm [SAG-GHZM;Modulation Depth:1rad;Wavelength:400nm;@400nm]35dBm
Input Impedance [SAG-GHZM]50Ω
RF Connector [SAG-GHZM]SMA-F
Maximum RF Power [SAG-GHZM]5W
Clear Aperture Dimension [SAG-GHZM]1–2mm²
Maximum Optical Power Density [SAG-GHZM]1W/mm²
Operating Temperature (TEC Cooling)* [SAG-GHZM;Active TEC Cooling Required]5°C
Storage Temperature [SAG-GHZM]- 40–85°C
Output Voltage [SAG-HVED]0–±220/400V
Rise/Fall Time* [SAG-HVED;10%–90% Levels;Affected by Amplitude and Capacitive Load]7–10ns
Bias Voltage [SAG-HVED]0–50V
Delay Time [SAG-HVED]≤200ns
Repetition rate [SAG-HVED;0.5MHz at400V Output;Only220V Version Supports1MHz (Source Note)]0.5–0.7MHz
Pulse Jitter [SAG-HVED]1–20ps
Input Power Supply [SAG-HVED]100–240ACV
Power Consumption [SAG-HVED]≤10W
Control Input [SAG-HVED]0–5V
Humidity [SAG-HVED]90% (Noncondensing)
Operating Temperature [SAG-HVED]-5–40°C
Storage Temperature [SAG-HVED]- 40–85°C

Applications

SAG-FEOM: laser modulation, holographic imaging, metal cutting/engraving and micromachining. SAG-REOM: laser modulation. SAG-GHZM: atomic clocks, optical blocking, configurable operation and instrumentation. SAG-HVED: electro-optic device control.

Key Features

SAG-FEOM: high performance, compact package, easy integration, customization and cost effectiveness. SAG-REOM: low loss, easy use and cost effectiveness. SAG-GHZM: high speed, ultrahigh reliability, low insertion loss and compact structure. SAG-HVED: 400V high-voltage output, 10 ns rise/fall time and analog response.

Datasheet

Please provide your email to download the datasheet.

Your name
Email Address

Invalid email format. Please try again.

Send Request

Supplier Information

Si
Sinteclaser
View Supplier →
Wuhan Sintec Optoelectronics Technology Co., Ltd. is a high-tech enterprise and a specialized and sophisticated 'Little Giant' enterprise at the upstream of the domestic laser industry chain. The company focuses on the R&D, manufacturing, sales and service of lasers and laser accessories. Its main products include femtosecond lasers, picosecond lasers, acousto-optic modulators, optical components, etc., widely used in laser equipment manufacturing, scientific research and other fields. Located in Wuhan Optical Valley, with a modern industrial park, the company provides one-stop personalized services for the laser industry, with customers all over China and products exported overseas.

Request a Quote

Our team responds within 24–48 hours
SAG Free-Space Electro-Optic Modulator (Pockels Cell)
Sinteclaser · EOM
Direct from Manufacturer
Your inquiry will be sent directly to the manufacturer
Photonics Source Platform
We handles the inquiry on your behalf
Your information is protected and will never be shared without consent.
Contact Us

Loading...

GetExperimental Plan

Name

Phone

+86

Organization

Use Case

AI Parametric Selection
Smart Match · Precise Recs
Enter Specifications
AI Smart Matching
Get Best Matches
Skip Manual Comparison
Find Best Solutions Fast
Select Now →