LVR-Drive OEM Rack-Mount BBO Pockels Cell Driver
The compact OEM Pockels cell driver supports regenerative amplifiers and other pulse-selection applications within solid-state laser systems. Repetition rate is0–200kHz, reaching1MHz in burst mode; output voltage is0–2.5kV, rise/fall time4–7ns, and pulse width250 ns–3μs. An external power supply minimizes thermal load and space requirements. For safety, trigger inputs are electrically isolated from the supply. The115x90x30mm(4.5x3.5x1.2") circuit board is mounted on an aluminum plate for ventilated cooling, or can be attached to a cold plate for water cooling. A turnkey integrated19-inch rack/benchtop version is also available. *The mounting plate should be coupled to a thermally conductive surface for cooling or to a cold plate for water cooling.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Pulse Repetition Rate | min:40kHz; Water Cooling1.5L/min; max:200kHz |
| Pulse Voltage | min:0kV; max:2.5kV; External HV:±625VDC Input,2.5kV Output |
| Pulse Width | min:250ns; max:3,000ns; Same as Trigger Input |
| Rise/Fall Time [2.0kV; Load 6pF] | max ：6.0ns |
| Rise/Fall Time [2.0kV; Maximum Load40pF] | max ：9.5ns |
| Voltage Input | max:200mA |
| High Voltage | max:55mA |
| Trigger Amplitude [2.5kV Output ;±625VDC Input ;200kHz;6pF] | min:4V; max:10V,2.5kV Output ,±625VDC Input ,200kHz,6pF |
| Trigger-to-Output Delay | 40ns |
| Trigger Pulse Width | min:250ns; max:3,000; Sets Output Pulse Width |
| Jitter, Trigger Output [RMS;2ns Trigger Rise Time; Tektronix11801] | 20ps RMS (2ns Trigger Rise Time, Tektronix11801) |
| Ambient Temperature | 50℃ |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
1CH×25G/28G DML Driver
Software and Data Services
Xy-technology
XY5221DD is One. Single Channel Laser Driver ， Designed for direct modems 25Gb/s Laser Interface 。 The currents and the transients can be replaced by the currents. 2 Line Line Lines Interface Independent Programming ， Meanwhile... 2 Line Interface Supports also the inclusion of programmability for balancing and cross-point adjustments ， Take one. Tx Disable ， It can be closed. Laser Erosion and Moderation Current ， Existing IBIAS Monitor 。 This simulation output can be used to Laser Overcrowding and / or Laser Modulation Current for External Monitoring 。 There's a piece in there. ADC Functions ， It can be used for foot-inducing measurements via electrical input of a special back-cover monitor TX_PWR。ADC It can also be configured for measurement. VCC（ ..can measure each Power Supply ） and IBIAS（ Average Laser Erosion of currents ）。
-
1CH×25G/28G EML Driver
Software and Data Services
Xy-technology
XY5221E is A high-performance piece. Single Channel 28Gbps EML Driver 。 It provides daring. 30GHz High bandwidth and greater than 2.5Vpp and the output range ， The cost of the operation is about 0.17W。 It's designed for use in... Drive EML Laser ， The chip is available in nudity chip form. 。
-
4CH×25G/28G DML Driver
Software and Data Services
Xy-technology
XY5224DD is One. Four Channel Laser Driver ， Designed for direct modems 25Gb/s Laser Interface 。 The currents and the transients can be replaced by the currents. 2 Line Line Lines Interface Independent Programming ， Meanwhile... 2 Line Interface Supports also the inclusion of programmability for balancing and cross-point adjustments ， Take one. Tx Disable ， It can be closed. Laser Erosion and Moderation Current ， Existing IBIAS Monitor 。 This simulation output can be used to Laser Overcrowding and / or Laser Modulation Current for External Monitoring 。 There's a piece in there. ADC Functions ， It can be used for foot-inducing measurements via electrical input of a special back-cover monitor TX_PWR。ADC It can also be configured for measurement. VCC（ ..can measure each Power Supply ） and IBIAS（ Average Laser Erosion of currents ）。
-
4CH×25G/28G EML Driver
Software and Data Services
Xy-technology
XY5224E is A high-performance piece. Four Channel 28Gbps EML Driver 。 It provides daring. 30GHz High bandwidth and greater than 2.5Vpp and the output range ， The cost of the operation is about 0.45W。 It's designed for use in... Drive EML Laser ， The chip is available in nudity chip form. 。
-
25G/28G CDR+VCSEL Driver
Software and Data Services
Xy-technology
XY5921V Integration VCSEL Driver 、 Balancer and clock data recovery 。 None The reference clock will support it. 24.3Gbps Present. 28.1Gbps Rate range ， It's also possible. bypass Mode supports lower rate 。 The chip is provided in nudist form. 。
Related Articles
As a professional ultraviolet‑laser solution provider, Precilasers has launched its 266 nm narrow‑linewidth industrial laser, delivering reliable single‑frequency output for high‑precision interference lithography, semiconductor inspection and precision metrology applications.
On November 28, 2024, the 3rd China Laser Star Enterprise Summit & Advanced Laser Processing Technology Summit, an annual influential event in the laser industry, was grandly held in Wuhan Optics Valley.
Within cutting‑edge ultrafast photonics research, asynchronous optical sampling (ASOPS) and synchronous sampling serve as fundamental technologies for terahertz excitation detection, coherent Raman imaging and other time‑resolved spectroscopy experiments.
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
Loading...
Name
Phone
Organization
Use Case
Database Platform