ICC-4C-2000 Four-Channel Industrial Current Controller
The ICC-4C-2000 industrial controller provides seamless control of the XPR, BSW, and FMR product lines. Its extensive control interfaces and easy-to-use Optockpit software simplify actuator operation, making it ideal for laser processing and projectors. Product information and selection consultation: optotune controllers. Related application notes: fine-steering and fast-steering mirror brochure, machine-vision brochure, field-of-view (FOV) expansion module, and field-of-view expansion application notes. Standard product configurations: ICC-4C-2000, controller body only; ICC-4C-2000 extension kit, including an adapter board for XPR, BSW, and FMR with a 20 cm extension cable, a Micro-USB cable, and a DIN-rail mounting-clip kit; ICC-4C power adapter, available with country-specific power cords (EU / CH / US / UK / CN).
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Dimensions | 164 mm × 105 mm × 44 mm |
| Weight | 700 g |
| USB Interface | Micro B，USB 2.0 |
| maximum USB Cable Length | 5 m |
| DC Power Plug | Inner Diameter 2.1 mm × Outer Diameter 5.5 mm × Length 10.0 mm |
| Output Interface | Standard Pin Header, 2.54 mm (100 mil) Pitch, 34 Pins |
| I/O Interface | Standard Pin Header, 2.54 mm (100 mil) Pitch, 20 Pins |
| Mounting Method | T-Slot for Standard M4 Nuts |
| Supply Voltage Range | 24–48 VDC |
| PoE Specification | PoE+（IEEE 802.3at） |
| Maximum Total Power Consumption | 65 W |
| Operating Temperature | 0 – 60 °C |
| Storage Temperature | -40 – +85 °C |
| Maximum Simultaneous Output Current across Four Channels | ±2000 mA |
| Minimum Current Step | 0.25 mA |
| Resolution | 14 bit |
| Front-End Voltage (Configurable) [Configurable;Factory Default18 V] | 6–18 V (Factory Default18 V) |
| Output-Voltage Limit | 4–16 V |
| Output-Stage Topology | Full-Bridge Topology, Filtered PWM (Ungrounded Load) |
| Digital Communication [Independent I²C Bus per Channel;Maximum] | Independent I²C Bus per Channel, up to400 kHz |
| I²C Logic Level (Built-In Pull-Up) | 3.3 V |
| I²C Power Supply (Independent per Channel) | 3.3 V |
| Logic-Supply Current [Per Channel;Overcurrent Protection] | typical:Typical100 mA per Channel (Overcurrent Protection) |
| Status Indicators (Main Controller + Individual Channels) | Red/Green/Orange LEDs |
| Analog Input Range [4 Channel] | 0–10 V |
| Analog Input Resolution (per Channel) | 16 bit |
| Analog Input Bandwidth | 10 kHz |
| Digital Input Interface | 4×GPIO (Configurable as SPI), I²C, UART, SYNC_A, SYNC_B, MCU RESET |
| Digital Input Logic Level | 3.3 V (Not Compatible with5 V) |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
22MA PLUS Series (Bus) 22MAPLUS Automation and Control Syntecclub
Axis Count: 6 DA [Optional Specifications]: △ Inclined-Plane Machining [Optional Specifications]: △
22MA PLUS. 22MA PLUS Series controllers use Yaskawa bus communications to improve timing issues in multiaxis motion control with conventional pulse-based general-purpose controllers, providing good coordinated control and timely response.
-
22PLUS series lathe controllers (serial) 22TAPLUS Automation and Control Syntecclub
Axis Count: 4 DA [Optional Specifications]: △ Maximum I/O Count [RIO、M3IO]: 64/64 (RIO、M3IO)
22TA PLUS and 22TB PLUS. 22PLUS series controllers use Yaskawa serial communications to improve timing issues in multiaxis motion control with conventional pulse-based general-purpose controllers, providing good coordinated control and timely response.
-
PLC Optical Splitter Automation and Control Adfiber
1x4-Center Wavelength [The Specifications Above Exclude Connectors]: 1280 ~ 1650 1x4 - Insertion loss (dB) .* [The Specifications Above Exclude Connectors]: ≤ 7.3 dB 1x4 - Uniformity (dB) .* [The Specifications Above Exclude Connectors]: ≤ 1.0 dB
The planar lightwave circuit splitter (PLC Splitter) is an integrated-waveguide optical power distribution device on a quartz substrate. It offers small size, a wide operating wavelength range, high reliability and uniform splitting, particularly for connecting central-office and terminal equipment and splitting optical signals in passive optical networks such as EPON and GPON.
-
Vision alignment system Automation and Control Chinaddwy
-
MDS3200+
Automation and Control
Cctc
Recommended fluid: LED phosphors, SMT adhesives (including conductive adhesives containing hard particles), silicone resins, underfills, hot-melt adhesives, solder paste, etc. Striker type: Replaceable; different shapes; monolithic ceramic or metal carbide Dispensing volume [Minimum, depending on fluid type; Maximum single-dot precision can be controlled by an external independent pulse signal]: 1 nanoliters single point
Related Articles
The LZFL405‑80mW‑3 series from Shenzhen Leirte Optoelectronics Co., Ltd. is a coaxial‑packaged violet‑blue single‑mode fiber‑coupled laser diode. It delivers 80 mW continuous‑wave output at 405 nm. Light is coupled into 3 μm core‑diameter single‑mode fiber for clean beam quality and easy integration into diverse optical systems. It serves as a compact violet‑blue light source for medical instruments and industrial printing applications.
Wuhan Optics Valley Quantum Technology Co., Ltd. is a leading domestic developer of high‑speed semiconductor optical chips and photodetector components. Our product portfolio covers InGaAs avalanche photodiode bare dies and PIN photodetector chips designed for fiber‑optic communication
As a professional ultraviolet‑laser solution provider, Precilasers has launched its 266 nm narrow‑linewidth industrial laser, delivering reliable single‑frequency output for high‑precision interference lithography, semiconductor inspection and precision metrology applications.
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
Loading...
Name
Phone
Organization
Use Case
Database Platform