Dual-Frequency Germanium Acousto-Optic Modulator RF Driver HP040-060-150ADG-A10-2X
HP040-060-150ADG-A10-2X is a high-power dual-channel RF driver for dual-frequency germanium acousto-optic modulators. It delivers up to150 W total output (up to75 W per channel), supports analog and digital modulation, and switches rapidly between40 MHz and60 MHz drive frequencies. Amplitude modulation reaches1 MHz in both analog and digital modes, with drive-frequency switching up to5 MHz, supporting high-power laser modulation, beam control, and dual-frequency acousto-optic systems. Copper water-cooling modules provide excellent heat dissipation and corrosion resistance. An aluminum-alloy enclosure with conductive surface passivation offers excellent electromagnetic compatibility (EMC) shielding and mechanical protection. Applications include CO2 laser modulation, dual-frequency acousto-optic scanning, high-power beam control, and industrial laser processing. Note: all stated specifications were measured into50 Ω.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Compatible Devices | Dual-Frequency Germanium Acousto-Optic Modulator |
| Operating Frequency [50 Ω Load] | 5 MHz (Frequency Switching Rate) |
| Power Supply Voltage | +24 VDC |
| Supply Current [150 W RF Output ;50 Ω Load] | typical:Typical15 A (at150 W RF Output) |
| Number of Channels | 2 |
| Output Impedance | 50 Ω |
| RF Output Frequency [50 Ω Load] | Switchable40 MHz / 60 MHz |
| Frequency Accuracy [50 Ω Load] | ＜ ±50 ppm |
| Frequency Stability [50 Ω Load] | ＜ ±50 ppm |
| Extinction Ratio [50 Ω Load] | ＞ 40 dB |
| Harmonic Distortion [75 W/ Channel ;50 Ω Load] | ＜ -26 dBc（75 W/ Channel ） |
| Spurious Signals [50 Ω Load] | ＜ -50 dBc |
| Maximum Output Power per Channel [50 Ω Load;Continuous Wave] | ＞ 75 W CW |
| Power Adjustment Range [50 Ω Load] | ＜1 W ～ ＞75 W |
| Total Output Power [50 Ω Load] | ≤ 150 W |
| Analog Modulation Input Impedance | 600 Ω |
| Analog Modulation Input Voltage Range | 0～10 V（ Optional 0～5 V） |
| Analog Modulation Power Control Range | 0～100% of Preset Maximum RF Output Power |
| Digital Modulation / Frequency Switching Input Impedance | 4.7 kΩ (Pull-Up) |
| Digital Modulation / Frequency Switching Input Level | TTL Compatible |
| Digital Modulation / Frequency Switching VIL | 0.8 V |
| Digital Modulation / Frequency Switching VIH | 2.0 V |
| Digital Modulation / Frequency Switching High Level | RF On /40 MHz |
| Digital Modulation / Frequency Switching Low Level | RF Off /60 MHz |
| Amplitude Modulation Frequency [50 Ω Load] | ≤ 1 MHz |
| Drive Frequency Switching Rate [50 Ω Load] | ≤ 1 MHz |
| Rise/Fall Time [10%～90%;50 Ω Load] | ＜100 ns（10%～90%） |
| RF Output Interface | 2 × BNC Female Connectors |
| Control Interface | D-Sub15-Pin Male Connector |
| Cooling Method | Water Cooling |
| Cooling Module Material | Copper |
| Water Connection | 2 × G1/4″ Threaded Ports with6 mm Push-Fit Connectors |
| Recommended Flow Rate | ＞ 2 L/min |
| Coolant Temperature | 25°C ±10°C |
| Maximum Cooling Pressure | ＜100 psi（6.9 bar） |
| Dimensions | 240 mm × 110 mm × 123 mm |
| Weight | 4 kg |
Key Features
Datasheet
Supplier Information
Related Products
-
1CH×25G/28G DML Driver
Software and Data Services
Xy-technology
XY5221DD is One. Single Channel Laser Driver ， Designed for direct modems 25Gb/s Laser Interface 。 The currents and the transients can be replaced by the currents. 2 Line Line Lines Interface Independent Programming ， Meanwhile... 2 Line Interface Supports also the inclusion of programmability for balancing and cross-point adjustments ， Take one. Tx Disable ， It can be closed. Laser Erosion and Moderation Current ， Existing IBIAS Monitor 。 This simulation output can be used to Laser Overcrowding and / or Laser Modulation Current for External Monitoring 。 There's a piece in there. ADC Functions ， It can be used for foot-inducing measurements via electrical input of a special back-cover monitor TX_PWR。ADC It can also be configured for measurement. VCC（ ..can measure each Power Supply ） and IBIAS（ Average Laser Erosion of currents ）。
-
1CH×25G/28G EML Driver
Software and Data Services
Xy-technology
XY5221E is A high-performance piece. Single Channel 28Gbps EML Driver 。 It provides daring. 30GHz High bandwidth and greater than 2.5Vpp and the output range ， The cost of the operation is about 0.17W。 It's designed for use in... Drive EML Laser ， The chip is available in nudity chip form. 。
-
4CH×25G/28G DML Driver
Software and Data Services
Xy-technology
XY5224DD is One. Four Channel Laser Driver ， Designed for direct modems 25Gb/s Laser Interface 。 The currents and the transients can be replaced by the currents. 2 Line Line Lines Interface Independent Programming ， Meanwhile... 2 Line Interface Supports also the inclusion of programmability for balancing and cross-point adjustments ， Take one. Tx Disable ， It can be closed. Laser Erosion and Moderation Current ， Existing IBIAS Monitor 。 This simulation output can be used to Laser Overcrowding and / or Laser Modulation Current for External Monitoring 。 There's a piece in there. ADC Functions ， It can be used for foot-inducing measurements via electrical input of a special back-cover monitor TX_PWR。ADC It can also be configured for measurement. VCC（ ..can measure each Power Supply ） and IBIAS（ Average Laser Erosion of currents ）。
-
4CH×25G/28G EML Driver
Software and Data Services
Xy-technology
XY5224E is A high-performance piece. Four Channel 28Gbps EML Driver 。 It provides daring. 30GHz High bandwidth and greater than 2.5Vpp and the output range ， The cost of the operation is about 0.45W。 It's designed for use in... Drive EML Laser ， The chip is available in nudity chip form. 。
-
25G/28G CDR+VCSEL Driver
Software and Data Services
Xy-technology
XY5921V Integration VCSEL Driver 、 Balancer and clock data recovery 。 None The reference clock will support it. 24.3Gbps Present. 28.1Gbps Rate range ， It's also possible. bypass Mode supports lower rate 。 The chip is provided in nudist form. 。
Related Articles
As a professional ultraviolet‑laser solution provider, Precilasers has launched its 266 nm narrow‑linewidth industrial laser, delivering reliable single‑frequency output for high‑precision interference lithography, semiconductor inspection and precision metrology applications.
On November 28, 2024, the 3rd China Laser Star Enterprise Summit & Advanced Laser Processing Technology Summit, an annual influential event in the laser industry, was grandly held in Wuhan Optics Valley.
Within cutting‑edge ultrafast photonics research, asynchronous optical sampling (ASOPS) and synchronous sampling serve as fundamental technologies for terahertz excitation detection, coherent Raman imaging and other time‑resolved spectroscopy experiments.
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
Loading...
Name
Phone
Organization
Use Case
Database Platform